diff --git a/board/digsy_mtc/Makefile b/board/digsy_mtc/Makefile
index a40076c..19f5b3a 100644
--- a/board/digsy_mtc/Makefile
+++ b/board/digsy_mtc/Makefile
@@ -7,10 +7,11 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= $(BOARD).o cmd_mtc.o
+COBJS-y	:= $(BOARD).o cmd_mtc.o
+COBJS-$(CONFIG_VIDEO) += cmd_disp.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
 $(LIB):	$(obj).depend $(OBJS)
diff --git a/board/digsy_mtc/cmd_disp.c b/board/digsy_mtc/cmd_disp.c
new file mode 100644
index 0000000..d5f5efb
--- /dev/null
+++ b/board/digsy_mtc/cmd_disp.c
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2011 DENX Software Engineering,
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc5xxx.h>
+#include <asm/io.h>
+
+#define GPIO_USB1_0	0x00010000
+
+static int cmd_disp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+	if (argc < 2) {
+		printf("%s\n",
+		       in_be32(&gpio->simple_dvo) & GPIO_USB1_0 ? "on" : "off");
+		return 0;
+	}
+
+	if (!strncmp(argv[1], "on", 2)) {
+		setbits_be32(&gpio->simple_dvo, GPIO_USB1_0);
+	} else if (!strncmp(argv[1], "off", 3)) {
+		clrbits_be32(&gpio->simple_dvo, GPIO_USB1_0);
+	} else {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+	return 0;
+}
+
+U_BOOT_CMD(disp, 2, 1, cmd_disp,
+		"disp [on/off] - switch display on/off",
+		"\n    - print display on/off status\n"
+		"on\n    - turn on\n"
+		"off\n    - turn off\n"
+);
diff --git a/board/digsy_mtc/digsy_mtc.c b/board/digsy_mtc/digsy_mtc.c
index 588face..784ba2a 100644
--- a/board/digsy_mtc/digsy_mtc.c
+++ b/board/digsy_mtc/digsy_mtc.c
@@ -48,6 +48,7 @@
 #endif
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <i2c.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -207,6 +208,69 @@
 	return 0;
 }
 
+#if defined(CONFIG_VIDEO)
+
+#define GPIO_USB1_0		0x00010000	/* Power-On pin */
+#define GPIO_USB1_9		0x08		/* PX_~EN pin */
+
+#define GPIO_EE_DO		0x10		/* PSC6_0 (DO) pin */
+#define GPIO_EE_CTS		0x20		/* PSC6_1 (CTS) pin */
+#define GPIO_EE_DI		0x10000000	/* PSC6_2 (DI) pin */
+#define GPIO_EE_CLK		0x20000000	/* PSC6_3 (CLK) pin */
+
+#define GPT_GPIO_ON		0x00000034	/* GPT as simple GPIO, high */
+
+/* ExBo I2C Addresses */
+#define EXBO_EE_I2C_ADDRESS	0x56
+
+static void exbo_hw_init(void)
+{
+	struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT;
+	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+	struct mpc5xxx_wu_gpio *wu_gpio =
+				(struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
+	unsigned char val;
+
+	/* 1st, check if extension board is present */
+	if (i2c_read(EXBO_EE_I2C_ADDRESS, 0, 1, &val, 1))
+		return;
+
+	/* configure IrDA pins (PSC6 port) as gpios */
+	gpio->port_config &= 0xFF8FFFFF;
+
+	/* Init for USB1_0, EE_CLK and EE_DI - Low */
+	setbits_be32(&gpio->simple_ddr,
+			GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
+	clrbits_be32(&gpio->simple_ode,
+			GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
+	clrbits_be32(&gpio->simple_dvo,
+			GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
+	setbits_be32(&gpio->simple_gpioe,
+			GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
+
+	/* Init for EE_DO, EE_CTS - Input */
+	clrbits_8(&wu_gpio->ddr, GPIO_EE_DO | GPIO_EE_CTS);
+	setbits_8(&wu_gpio->enable, GPIO_EE_DO | GPIO_EE_CTS);
+
+	/* Init for PX_~EN (USB1_9) - High */
+	clrbits_8(&gpio->sint_ode, GPIO_USB1_9);
+	setbits_8(&gpio->sint_ddr, GPIO_USB1_9);
+	clrbits_8(&gpio->sint_inten, GPIO_USB1_9);
+	setbits_8(&gpio->sint_dvo, GPIO_USB1_9);
+	setbits_8(&gpio->sint_gpioe, GPIO_USB1_9);
+
+	/* Init for ~OE Switch (GPIO3) - Timer_0 GPIO High */
+	out_be32(&gpt[0].emsr, GPT_GPIO_ON);
+	/* Init for S Switch (GPIO4) - Timer_1 GPIO High */
+	out_be32(&gpt[1].emsr, GPT_GPIO_ON);
+
+	/* Power-On camera supply */
+	setbits_be32(&gpio->simple_dvo, GPIO_USB1_0);
+}
+#else
+static inline void exbo_hw_init(void) {}
+#endif /* CONFIG_VIDEO */
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_MPC52XX_SPI
@@ -224,6 +288,8 @@
 	/* enable CS0 */
 	setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16));
 
+	exbo_hw_init();
+
 #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 	/* Low level USB init, required for proper kernel operation */
 	usb_cpu_init();
diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index c738b3a..4a4eaba 100644
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -86,10 +86,37 @@
 #define CONFIG_BZIP2
 
 /*
+ * Video
+ */
+#define CONFIG_VIDEO
+
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_MB862xx
+#define CONFIG_VIDEO_MB862xx_ACCEL
+#define CONFIG_VIDEO_CORALP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* decompressed img */
+
+/* Coral-PA clock frequency, geo and other both 133MHz */
+#define CONFIG_SYS_MB862xx_CCF	0x00050000
+/* Video SDRAM parameters */
+#define CONFIG_SYS_MB862xx_MMR	0x11d7fa72
+#endif
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
 #define CONFIG_CMD_DFL
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE