ARM: tegra: Enable PCIe on Cardhu
The PCIe bus on Cardhu is routed to the dock connector. An ethernet NIC
is available on the dock over the PCIe bus. Enable the PCIe controller
and the network device driver so that the device can boot over the
network.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/dts/tegra30-cardhu.dts b/arch/arm/dts/tegra30-cardhu.dts
index 1b8ed73..e13d0fb 100644
--- a/arch/arm/dts/tegra30-cardhu.dts
+++ b/arch/arm/dts/tegra30-cardhu.dts
@@ -27,6 +27,31 @@
reg = <0x80000000 0x40000000>;
};
+ pcie-controller@00003000 {
+ status = "okay";
+
+ /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
+ avdd-pexb-supply = <&ldo1_reg>;
+ vdd-pexb-supply = <&ldo1_reg>;
+ avdd-pex-pll-supply = <&ldo1_reg>;
+ hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
+ vddio-pex-ctl-supply = <&sys_3v3_reg>;
+ avdd-plle-supply = <&ldo2_reg>;
+
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <1>;
+ };
+
+ pci@3,0 {
+ status = "okay";
+ nvidia,num-lanes = <1>;
+ };
+ };
+
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
@@ -50,6 +75,107 @@
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
+
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&vdd_ac_bat_reg>;
+ vcc2-supply = <&vdd_ac_bat_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&vdd_5v0_reg>;
+ vcc5-supply = <&vdd_ac_bat_reg>;
+ vcc6-supply = <&vdd2_reg>;
+ vcc7-supply = <&vdd_ac_bat_reg>;
+ vccio-supply = <&vdd_ac_bat_reg>;
+
+ regulators {
+ vdd1_reg: vdd1 {
+ regulator-name = "vddio_ddr_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd2_reg: vdd2 {
+ regulator-name = "vdd_1v5_gen";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vddctrl_reg: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vio_reg: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "vdd_pexa,vdd_pexb";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "vdd_sata,avdd_plle";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ /* LDO3 is not connected to anything */
+
+ ldo4_reg: ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "vddio_sdmmc,avdd_vdac";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "vdd_pllm,x,u,a_p_c_s";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
};
spi@7000da00 {
@@ -74,4 +200,240 @@
nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
status = "okay";
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_ac_bat_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ cam_1v8_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "cam_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vio_reg>;
+ };
+
+ cp_5v_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "cp_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ emmc_3v3_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "emmc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ modem_3v3_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "modem_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ pex_hvdd_3v3_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "pex_hvdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_cam1_ldo_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vdd_cam1_ldo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_cam2_ldo_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "vdd_cam2_ldo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_cam3_ldo_reg: regulator@8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "vdd_cam3_ldo";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_com_reg: regulator@9 {
+ compatible = "regulator-fixed";
+ reg = <9>;
+ regulator-name = "vdd_com";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_fuse_3v3_reg: regulator@10 {
+ compatible = "regulator-fixed";
+ reg = <10>;
+ regulator-name = "vdd_fuse_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_pnl1_reg: regulator@11 {
+ compatible = "regulator-fixed";
+ reg = <11>;
+ regulator-name = "vdd_pnl1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_vid_reg: regulator@12 {
+ compatible = "regulator-fixed";
+ reg = <12>;
+ regulator-name = "vddio_vid";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ ddr_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ regulator-name = "ddr";
+ reg = <100>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ sys_3v3_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "sys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb1_vbus_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ reg = <102>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ usb3_vbus_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ vdd_5v0_reg: regulator@104 {
+ compatible = "regulator-fixed";
+ reg = <104>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_bl_reg: regulator@105 {
+ compatible = "regulator-fixed";
+ reg = <105>;
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_bl2_reg: regulator@106 {
+ compatible = "regulator-fixed";
+ reg = <106>;
+ regulator-name = "vdd_bl2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+ };
+ };
};
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index 026f45c..95c4ff2 100644
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -9,8 +9,11 @@
#include <dm.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
#include "pinmux-config-cardhu.h"
#include <i2c.h>
+#include <netdev.h>
#define PMU_I2C_ADDRESS 0x2D
#define MAX_I2C_RETRY 3
@@ -83,3 +86,52 @@
board_sdmmc_voltage_init();
}
#endif /* MMC */
+
+#ifdef CONFIG_PCI_TEGRA
+int tegra_pcie_board_init(void)
+{
+ struct udevice *dev;
+ u8 addr, data[1];
+ int err;
+
+ err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ if (err) {
+ debug("failed to find PMU bus\n");
+ return err;
+ }
+
+ /* TPS659110: LDO1_REG = 1.05V, ACTIVE */
+ data[0] = 0x15;
+ addr = 0x30;
+
+ err = i2c_write(dev, addr, data, 1);
+ if (err) {
+ debug("failed to set VDD supply\n");
+ return err;
+ }
+
+ /* GPIO: PEX = 3.3V */
+ err = gpio_request(GPIO_PL7, "PEX");
+ if (err < 0)
+ return err;
+
+ gpio_direction_output(GPIO_PL7, 1);
+
+ /* TPS659110: LDO2_REG = 1.05V, ACTIVE */
+ data[0] = 0x15;
+ addr = 0x31;
+
+ err = i2c_write(dev, addr, data, 1);
+ if (err) {
+ debug("failed to set AVDD supply\n");
+ return err;
+ }
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}
+#endif /* PCI */
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index 758b7ad..5e13b65 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -78,6 +78,16 @@
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
+/* PCI host support */
+#define CONFIG_PCI
+#define CONFIG_PCI_TEGRA
+#define CONFIG_PCI_PNP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
+
+/* PCI networking support */
+#define CONFIG_RTL8169
+
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP