apalis-tk1: switch to zImage
Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 0bde169..10f2948 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -42,7 +42,7 @@
#define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
"boot part 0 1 mmcpart 0; " \
"rootfs part 0 2 mmcpart 0; " \
- "uImage fat 0 1 mmcpart 0; " \
+ "zImage fat 0 1 mmcpart 0; " \
"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
#define EMMC_BOOTCMD \
@@ -54,7 +54,7 @@
"run emmcdtbload; " \
"load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
"${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} - ${dtbparam}\0" \
+ "bootz ${kernel_addr_r} - ${dtbparam}\0" \
"emmcbootpart=1\0" \
"emmcdev=0\0" \
"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
@@ -68,7 +68,7 @@
"nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
"${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
"run nfsdtbload; dhcp ${kernel_addr_r} " \
- "&& run fdt_fixup && bootm ${kernel_addr_r} - ${dtbparam}\0" \
+ "&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
"${soc}-apalis-${fdt_board}.dtb " \
"&& setenv dtbparam ${fdt_addr_r}\0"
@@ -81,7 +81,7 @@
"${vidargs}; echo Booting from SD card in 8bit slot...; " \
"run sddtbload; load mmc ${sddev}:${sdbootpart} " \
"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} - ${dtbparam}\0" \
+ "bootz ${kernel_addr_r} - ${dtbparam}\0" \
"sdbootpart=1\0" \
"sddev=1\0" \
"sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
@@ -98,7 +98,7 @@
"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
"run usbdtbload; load usb ${usbdev}:${usbbootpart} " \
"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} - ${dtbparam}\0" \
+ "bootz ${kernel_addr_r} - ${dtbparam}\0" \
"usbbootpart=1\0" \
"usbdev=0\0" \
"usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
@@ -108,7 +108,7 @@
"usbrootpart=2\0"
#define BOARD_EXTRA_ENV_SETTINGS \
- "boot_file=uImage\0" \
+ "boot_file=zImage\0" \
"console=ttyS0\0" \
"defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \