stm32mp1: activate SET_DFU_ALT_INFO
Generate automatically dfu_alt_info for the supported device.
The simple command "dfu 0" allows to start the dfu stack on usb 0
for the supported devices:
- dfu mtd for nand0
- dfu mtd for nor0
- dfu mmc for SDCard
- dfu mmc for eMMC
- dfu ram for images in DDR
The DUF alternate use the "part", "partubi" and "mmcpart" options
to select the correct MTD or GPT partition or the eMMC hw boot partition.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/board/st/stm32mp1/README b/board/st/stm32mp1/README
index c807e08..f2069bc 100644
--- a/board/st/stm32mp1/README
+++ b/board/st/stm32mp1/README
@@ -390,3 +390,114 @@
the correct configuration
=> stm32mp157c-ev1-m4
=> stm32mp157c-dk2-m4
+
+11. DFU support
+===============
+
+The DFU is supported on ST board.
+The env variable dfu_alt_info is automatically build, and all
+the memory present on the ST boards are exported.
+
+The mode is started by
+
+STM32MP> dfu 0
+
+On EV1 board:
+
+STM32MP> dfu 0 list
+
+DFU alt settings list:
+dev: RAM alt: 0 name: uImage layout: RAM_ADDR
+dev: RAM alt: 1 name: devicetree.dtb layout: RAM_ADDR
+dev: RAM alt: 2 name: uramdisk.image.gz layout: RAM_ADDR
+dev: eMMC alt: 3 name: sdcard_fsbl1 layout: RAW_ADDR
+dev: eMMC alt: 4 name: sdcard_fsbl2 layout: RAW_ADDR
+dev: eMMC alt: 5 name: sdcard_ssbl layout: RAW_ADDR
+dev: eMMC alt: 6 name: sdcard_bootfs layout: RAW_ADDR
+dev: eMMC alt: 7 name: sdcard_vendorfs layout: RAW_ADDR
+dev: eMMC alt: 8 name: sdcard_rootfs layout: RAW_ADDR
+dev: eMMC alt: 9 name: sdcard_userfs layout: RAW_ADDR
+dev: eMMC alt: 10 name: emmc_fsbl1 layout: RAW_ADDR
+dev: eMMC alt: 11 name: emmc_fsbl2 layout: RAW_ADDR
+dev: eMMC alt: 12 name: emmc_ssbl layout: RAW_ADDR
+dev: eMMC alt: 13 name: emmc_bootfs layout: RAW_ADDR
+dev: eMMC alt: 14 name: emmc_vendorfs layout: RAW_ADDR
+dev: eMMC alt: 15 name: emmc_rootfs layout: RAW_ADDR
+dev: eMMC alt: 16 name: emmc_userfs layout: RAW_ADDR
+dev: MTD alt: 17 name: nor_fsbl1 layout: RAW_ADDR
+dev: MTD alt: 18 name: nor_fsbl2 layout: RAW_ADDR
+dev: MTD alt: 19 name: nor_ssbl layout: RAW_ADDR
+dev: MTD alt: 20 name: nor_env layout: RAW_ADDR
+dev: MTD alt: 21 name: nand_fsbl layout: RAW_ADDR
+dev: MTD alt: 22 name: nand_ssbl1 layout: RAW_ADDR
+dev: MTD alt: 23 name: nand_ssbl2 layout: RAW_ADDR
+dev: MTD alt: 24 name: nand_UBI layout: RAW_ADDR
+dev: VIRT alt: 25 name: OTP layout: RAW_ADDR
+dev: VIRT alt: 26 name: PMIC layout: RAW_ADDR
+
+All the supported device are exported for dfu-util tool:
+
+$> dfu-util -l
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=26, name="PMIC", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=25, name="OTP", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=24, name="nand_UBI", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=23, name="nand_ssbl2", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=22, name="nand_ssbl1", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=21, name="nand_fsbl", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="nor_env", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="nor_ssbl", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nor_fsbl2", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=17, name="nor_fsbl1", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=16, name="emmc_userfs", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=15, name="emmc_rootfs", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=14, name="emmc_vendorfs", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=13, name="emmc_bootfs", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=12, name="emmc_ssbl", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=11, name="emmc_fsbl2", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=10, name="emmc_fsbl1", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=9, name="sdcard_userfs", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=8, name="sdcard_rootfs", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=7, name="sdcard_vendorfs", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=6, name="sdcard_bootfs", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=5, name="sdcard_ssbl", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=4, name="sdcard_fsbl2", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=3, name="sdcard_fsbl1", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=2, name="uramdisk.image.gz", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=1, name="devicetree.dtb", serial="002700333338511934383330"
+Found DFU: [0483:5720] ver=9999, devnum=99, cfg=1, intf=0, alt=0, name="uImage", serial="002700333338511934383330"
+
+You can update the boot device:
+
+#SDCARD
+$> dfu-util -d 0483:5720 -a 3 -D tf-a-stm32mp157c-ev1-trusted.stm32
+$> dfu-util -d 0483:5720 -a 4 -D tf-a-stm32mp157c-ev1-trusted.stm32
+$> dfu-util -d 0483:5720 -a 5 -D u-boot-stm32mp157c-ev1-trusted.img
+$> dfu-util -d 0483:5720 -a 6 -D st-image-bootfs-openstlinux-weston-stm32mp1.ext4
+$> dfu-util -d 0483:5720 -a 7 -D st-image-vendorfs-openstlinux-weston-stm32mp1.ext4
+$> dfu-util -d 0483:5720 -a 8 -D st-image-weston-openstlinux-weston-stm32mp1.ext4
+$> dfu-util -d 0483:5720 -a 9 -D st-image-userfs-openstlinux-weston-stm32mp1.ext4
+
+#EMMC
+$> dfu-util -d 0483:5720 -a 10 -D tf-a-stm32mp157c-ev1-trusted.stm32
+$> dfu-util -d 0483:5720 -a 11 -D tf-a-stm32mp157c-ev1-trusted.stm32
+$> dfu-util -d 0483:5720 -a 12 -D u-boot-stm32mp157c-ev1-trusted.img
+$> dfu-util -d 0483:5720 -a 13 -D st-image-bootfs-openstlinux-weston-stm32mp1.ext4
+$> dfu-util -d 0483:5720 -a 14 -D st-image-vendorfs-openstlinux-weston-stm32mp1.ext4
+$> dfu-util -d 0483:5720 -a 15 -D st-image-weston-openstlinux-weston-stm32mp1.ext4
+$> dfu-util -d 0483:5720 -a 16 -D st-image-userfs-openstlinux-weston-stm32mp1.ext4
+
+#NOR
+$> dfu-util -d 0483:5720 -a 17 -D tf-a-stm32mp157c-ev1-trusted.stm32
+$> dfu-util -d 0483:5720 -a 18 -D tf-a-stm32mp157c-ev1-trusted.stm32
+$> dfu-util -d 0483:5720 -a 19 -D u-boot-stm32mp157c-ev1-trusted.img
+
+#NAND (UBI partition used for NAND only boot or NOR + NAND boot)
+$> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1-trusted.stm32
+$> dfu-util -d 0483:5720 -a 22 -D u-boot-stm32mp157c-ev1-trusted.img
+$> dfu-util -d 0483:5720 -a 23 -D u-boot-stm32mp157c-ev1-trusted.img
+$> dfu-util -d 0483:5720 -a 24 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi
+
+And you can also dump the OTP and the PMIC NVM with:
+
+$> dfu-util -d 0483:5720 -a 25 -U otp.bin
+$> dfu-util -d 0483:5720 -a 26 -U pmic.bin