
if SOC_MT7621

menu "CPU & DDR configuration"

config MT7621_CPU_FREQ
	int "CPU Frequency (MHz)"
	range 400 1200
	default 880

choice
	prompt "DRAM Frequency"
	default MT7621_DRAM_FREQ_1200

config MT7621_DRAM_FREQ_400
	bool "400MHz"

config MT7621_DRAM_FREQ_800
	bool "800MHz"

config MT7621_DRAM_FREQ_1066
	bool "1066MHz"

config MT7621_DRAM_FREQ_1200
	bool "1200MHz"

endchoice

choice
	prompt "DDR2 timing parameters"
	default MT7621_DRAM_DDR2_1024M

config MT7621_DRAM_DDR2_512M
	bool "64MB"

config MT7621_DRAM_DDR2_1024M
	bool "128MB"

config MT7621_DRAM_DDR2_512M_W9751G6KB_A02_1066MHZ
	bool "W9751G6KB_A02 @ 1066MHz (64MB)"

config MT7621_DRAM_DDR2_1024M_W971GG6KB25_800MHZ
	bool "W971GG6KB25 @ 800MHz (128MB)"

config MT7621_DRAM_DDR2_1024M_W971GG6KB18_1066MHZ
	bool "W971GG6KB18 @ 1066MHz (128MB)"

endchoice

choice
	prompt "DDR3 timing parameters"
	default MT7621_DRAM_DDR3_2048M

config MT7621_DRAM_DDR3_1024M
	bool "128MB"

config MT7621_DRAM_DDR3_1024M_KGD
	bool "128MB KGD (MT7621DA)"

config MT7621_DRAM_DDR3_2048M
	bool "256MB"

config MT7621_DRAM_DDR3_4096M
	bool "512MB"

endchoice

endmenu

config DEBUG_UART_BOARD_INIT
	default y

config MT7621_BOOT_FROM_NAND
	bool "Boot from NAND"
	help
	  Select this if u-boot will boot from NAND flash. When booting from
	  NAND, SPL will be loaded by bootrom directly and no TPL is needed.

choice
	prompt "Board select"

config BOARD_MT7621_RFB
	bool "MediaTek MT7621 RFB (SPI-NOR)"
	help
	  The reference design of MT7621A (WS3010) booting from SPI-NOR flash.
	  The board can be configured with DDR2 (64MiB~256MiB) or DDR3
	  (128MiB~512MiB). The board has 16 MiB SPI-NOR flash, built-in MT7530
	  GbE switch, 1 UART, 1 USB 2.0 host, 1 USB 3.0 host, 1 SDXC, 3 PCIe
	  sockets, 1 RGMII to external GbE PHY, 2 audio jacks (in/out),
	  JTAG pins and expansion GPIO pins.

config BOARD_MT7621_NAND_RFB
	bool "MediaTek MT7621 RFB (NAND)"
	help
	  The reference design of MT7621A (WS3010) booting from NAND flash.
	  The board can be configured with DDR2 (64MiB~256MiB) or DDR3
	  (128MiB~512MiB). The board has 128 MiB parallel NAND flash, built-in
	  MT7530 GbE switch, 1 UART, 1 USB 2.0 host, 1 USB 3.0 host, 3 PCIe
	  sockets, 1 RGMII to external GbE PHY, 2 audio jacks (in/out),
	  JTAG pins and expansion GPIO pins.

endchoice

config SYS_CONFIG_NAME
	default "mt7621" if  BOARD_MT7621_RFB || BOARD_MT7621_NAND_RFB

config SYS_BOARD
	string "Board name"
	default "mt7621" if  BOARD_MT7621_RFB || BOARD_MT7621_NAND_RFB

config SYS_VENDOR
	default "mediatek" if BOARD_MT7621_RFB || BOARD_MT7621_NAND_RFB

endif