diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c
index 904e3f3..396761b 100644
--- a/board/freescale/mx28evk/iomux.c
+++ b/board/freescale/mx28evk/iomux.c
@@ -28,6 +28,7 @@
 #define	MUX_CONFIG_SSP0	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
 #define	MUX_CONFIG_ENET	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
 #define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
+#define	MUX_CONFIG_SSP2	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
 
 const iomux_cfg_t iomux_setup[] = {
 	/* DUART */
@@ -130,6 +131,13 @@
 	MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
 	MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
 	MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
+
+	/* SPI2 (for SPI flash) */
+	MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
+	MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
+	MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
+	MX28_PAD_SSP2_SS0__SSP2_D3 |
+		(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
 };
 
 void board_init_ll(void)
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 8f791aa..04967d7 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -64,6 +64,8 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
 #define CONFIG_CMD_USB
 
 /*
@@ -127,9 +129,11 @@
  * MMC Driver
  */
 #define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET	(256 * 1024)
-#define CONFIG_ENV_SIZE	(16 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV 0
+#ifdef CONFIG_ENV_IS_IN_MMC
+ #define CONFIG_ENV_OFFSET	(256 * 1024)
+ #define CONFIG_ENV_SIZE	(16 * 1024)
+ #define CONFIG_SYS_MMC_ENV_DEV 0
+#endif
 #define CONFIG_CMD_SAVEENV
 #ifdef	CONFIG_CMD_MMC
 #define CONFIG_MMC
@@ -170,6 +174,40 @@
 #endif
 
 /*
+ * SPI
+ */
+#ifdef CONFIG_CMD_SPI
+#define CONFIG_HARD_SPI
+#define CONFIG_MXS_SPI
+#define CONFIG_SPI_HALF_DUPLEX
+#define CONFIG_DEFAULT_SPI_BUS		2
+#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0
+
+/* SPI Flash */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+/* this may vary and depends on the installed chip */
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED		24000000
+
+/* (redundant) environemnt in SPI flash */
+#undef CONFIG_ENV_IS_IN_SPI_FLASH
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_SIZE			0x1000		/* 4KB */
+#define CONFIG_ENV_OFFSET		0x40000		/* 256K */
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SECT_SIZE		0x1000
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_BUS		2
+#define CONFIG_ENV_SPI_MAX_HZ		24000000
+#define CONFIG_ENV_SPI_MODE		SPI_MODE_0
+#endif
+#endif
+#endif
+
+/*
  * Boot Linux
  */
 #define CONFIG_CMDLINE_TAG