diff --git a/arch/arm/dts/rk3328.dtsi b/arch/arm/dts/rk3328.dtsi
index fe81b97..fb5dcf6 100644
--- a/arch/arm/dts/rk3328.dtsi
+++ b/arch/arm/dts/rk3328.dtsi
@@ -965,6 +965,22 @@
 		};
 	};
 
+	usb20_otg: usb@ff580000 {
+		compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff580000 0x0 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
 	usb_host0_ehci: usb@ff5c0000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xff5c0000 0x0 0x10000>;
@@ -1004,31 +1020,6 @@
 		status = "disabled";
 	};
 
-	/*
-	 * U-Boot Specific Change
-	 *
-	 * The OTG controller must come after the USB host pair for it
-	 * to work. This is likely due to lack of support for the USB
-	 * PHYs. This must be manually changed after each device tree
-	 * sync. There is no clean way to handle this in -u-boot.dtsi
-	 * files.
-	 */
-	usb20_otg: usb@ff580000 {
-		compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
-			     "snps,dwc2";
-		reg = <0x0 0xff580000 0x0 0x40000>;
-		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_OTG>;
-		clock-names = "otg";
-		dr_mode = "otg";
-		g-np-tx-fifo-size = <16>;
-		g-rx-fifo-size = <280>;
-		g-tx-fifo-size = <256 128 128 64 32 16>;
-		phys = <&u2phy_otg>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
 	gic: interrupt-controller@ff811000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;