sata: Rename SATA_SUPPORT to SATA
Rename this options so that CONFIG_IS_ENABLED can be used with it.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 73327aa..0876437 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -298,7 +298,7 @@
config MVEBU_SPL_BOOT_DEVICE_SATA
bool "SATA"
- imply SPL_SATA_SUPPORT
+ imply SPL_SATA
imply SPL_LIBDISK_SUPPORT
select SPL_BOOTROM_SUPPORT
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index d0cdf68..77ee46c 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -18,7 +18,7 @@
#include <asm/arch/soc.h>
#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) || defined(CONFIG_SPL_MMC) || \
- defined(CONFIG_SPL_SATA_SUPPORT)
+ defined(CONFIG_SPL_SATA)
/*
* When loading U-Boot via SPL from SPI NOR, CONFIG_SYS_SPI_U_BOOT_OFFS must
@@ -57,7 +57,7 @@
* stored at sector 1. Therefore CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be
* set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
*/
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
#error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
#endif
@@ -122,7 +122,7 @@
#ifdef CONFIG_SPL_SPI_FLASH_SUPPORT
mhdr->blockid != IBR_HDR_SPI_ID &&
#endif
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
mhdr->blockid != IBR_HDR_SATA_ID &&
#endif
#ifdef CONFIG_SPL_MMC
@@ -136,7 +136,7 @@
spl_image->offset = mhdr->srcaddr;
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
/*
* For SATA srcaddr is specified in number of sectors.
* The main header is must be stored at sector number 1.
@@ -266,7 +266,7 @@
case BOOT_DEVICE_MMC1:
return BOOT_DEVICE_MMC1;
#endif
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
case BOOT_FROM_SATA:
return BOOT_FROM_SATA;
#endif
diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c
index c3a9904..6b836cb 100644
--- a/arch/arm/mach-zynqmp/spl.c
+++ b/arch/arm/mach-zynqmp/spl.c
@@ -100,7 +100,7 @@
case USB_MODE:
return BOOT_DEVICE_DFU;
#endif
-#ifdef CONFIG_SPL_SATA_SUPPORT
+#ifdef CONFIG_SPL_SATA
case SW_SATA_MODE:
return BOOT_DEVICE_SATA;
#endif
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 7c922b2..fcf4ef2 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -119,7 +119,7 @@
config MPC83XX_SDHC_SUPPORT
bool
-config MPC83XX_SATA_SUPPORT
+config MPC83XX_SATA
bool
config MPC83XX_SECOND_I2C
@@ -198,7 +198,7 @@
select MPC83XX_PCIE1_SUPPORT
select MPC83XX_PCIE2_SUPPORT
select MPC83XX_SDHC_SUPPORT
- select MPC83XX_SATA_SUPPORT
+ select MPC83XX_SATA
select MPC83XX_LDP_PIN
select MPC83XX_SECOND_I2C
select SYS_CACHE_SHIFT_5
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 76bb294..2618857 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -196,7 +196,7 @@
config SPL_RAW_IMAGE_SUPPORT
bool "Support SPL loading and booting of RAW images"
- default n if (ARCH_MX6 && (SPL_MMC || SPL_SATA_SUPPORT))
+ default n if (ARCH_MX6 && (SPL_MMC || SPL_SATA))
default y if !TI_SECURE_DEVICE
help
SPL will support loading and booting a RAW image when this option
@@ -1076,7 +1076,7 @@
needed. This enables the drivers in drivers/rtc as part of an SPL
build.
-config SPL_SATA_SUPPORT
+config SPL_SATA
bool "Support loading from SATA"
help
Enable support for SATA (Serial AT attachment) in SPL. This allows
@@ -1088,7 +1088,7 @@
config SPL_SATA_RAW_U_BOOT_USE_SECTOR
bool "SATA raw mode: by sector"
- depends on SPL_SATA_SUPPORT
+ depends on SPL_SATA
default y if ARCH_MVEBU
help
Use sector number for specifying U-Boot location on SATA disk in
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 29ac624..40107e3 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -27,7 +27,7 @@
obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o
-obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
+obj-$(CONFIG_$(SPL_TPL_)SATA) += spl_sata.o
obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o
obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o
diff --git a/drivers/Makefile b/drivers/Makefile
index 2205dd2..d62e3de 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -60,7 +60,7 @@
obj-$(CONFIG_SPL_WATCHDOG) += watchdog/
obj-$(CONFIG_SPL_USB_HOST) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
-obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
+obj-$(CONFIG_SPL_SATA) += ata/ scsi/
obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
obj-$(CONFIG_SPL_THERMAL) += thermal/
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 6fc5f4a..e9f8486 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -9,7 +9,7 @@
endif
ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_SATA_SUPPORT
+ifdef CONFIG_SPL_SATA
obj-$(CONFIG_DM_SCSI) += scsi-uclass.o
obj-$(CONFIG_SCSI) += scsi.o
endif
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index b5d5033..234aacb 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -59,7 +59,7 @@
#endif
/* SATA support */
-#if defined(CONFIG_SPL_SATA_SUPPORT)
+#if defined(CONFIG_SPL_SATA)
#define CONFIG_SPL_SATA_BOOT_DEVICE 0
#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
#endif