| /* |
| * (C) Copyright 2006-2009 |
| * Texas Instruments Incorporated. |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Syed Mohammed Khasim <x0khasim@ti.com> |
| * Nishanth Menon <nm@ti.com> |
| * |
| * Configuration settings for the 3430 TI SDP3430 board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* TODO: REMOVE THE FOLLOWING |
| * Retained the following till size.h is removed in u-boot |
| */ |
| #include <asm/sizes.h> |
| /* |
| * High Level Configuration Options |
| */ |
| #define CONFIG_OMAP 1 /* in a TI OMAP core */ |
| #define CONFIG_OMAP34XX 1 /* which is a 34XX */ |
| #define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */ |
| |
| #define CONFIG_SDRC /* The chip has SDRC controller */ |
| |
| #include <asm/arch/cpu.h> /* get chip and board defs */ |
| #include <asm/arch/omap3.h> |
| |
| /* |
| * NOTE: these #defines presume standard SDP jumper settings. |
| * In particular: |
| * - 26 MHz clock (not 19.2 or 38.4 MHz) |
| * - Boot from 128MB NOR, not NAND or OneNAND |
| * |
| * At this writing, OMAP3 U-Boot support doesn't permit concurrent |
| * support for all the flash types the board supports. |
| */ |
| #define CONFIG_DISPLAY_CPUINFO 1 |
| #define CONFIG_DISPLAY_BOARDINFO 1 |
| |
| /* Clock Defines */ |
| #define V_OSCK 26000000 /* Clock output from T2 */ |
| #define V_SCLK (V_OSCK >> 1) |
| |
| #undef CONFIG_USE_IRQ /* no support for IRQs */ |
| #define CONFIG_MISC_INIT_R |
| |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| #define CONFIG_INITRD_TAG 1 |
| #define CONFIG_REVISION_TAG 1 |
| |
| #define CONFIG_OF_LIBFDT 1 |
| |
| /* |
| * Size of malloc() pool |
| * Total Size Environment - 256k |
| * Malloc - add 256k |
| */ |
| #define CONFIG_ENV_SIZE (256 << 10) |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| /* |
| * Hardware drivers |
| */ |
| |
| /* |
| * TWL4030 |
| */ |
| #define CONFIG_TWL4030_POWER 1 |
| |
| /* |
| * serial port - NS16550 compatible |
| */ |
| #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ |
| |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK |
| |
| /* Original SDP u-boot used UART1 and thus J8 (innermost); that can be |
| * swapped with UART2 via jumpering. Downsides of using J8: it doesn't |
| * support UART boot (that's only for UART3); it prevents sharing a Linux |
| * kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards. |
| * |
| * UART boot uses UART3 on J9, and the SDP user's guide says to use |
| * that for console. Downsides of using J9: you can't use IRDA too; |
| * since UART3 isn't in the CORE power domain, it may be a bit less |
| * usable in certain PM-sensitive debug scenarios. |
| */ |
| #undef CONSOLE_J9 /* else J8/UART1 (innermost) */ |
| |
| #ifdef CONSOLE_J9 |
| #define CONFIG_CONS_INDEX 3 |
| #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 |
| #define CONFIG_SERIAL3 3 /* UART3 */ |
| #else |
| #define CONFIG_CONS_INDEX 1 |
| #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 |
| #define CONFIG_SERIAL1 1 /* UART1 */ |
| #endif |
| |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ |
| 115200} |
| |
| /* |
| * I2C for power management setup |
| */ |
| #define CONFIG_HARD_I2C 1 |
| #define CONFIG_SYS_I2C_SPEED 100000 |
| #define CONFIG_SYS_I2C_SLAVE 1 |
| #define CONFIG_SYS_I2C_BUS 0 |
| #define CONFIG_SYS_I2C_BUS_SELECT 1 |
| #define CONFIG_DRIVER_OMAP34XX_I2C 1 |
| |
| /* DDR - I use Infineon DDR */ |
| #define CONFIG_OMAP3_INFINEON_DDR 1 |
| |
| /* OMITTED: single 1 Gbit MT29F1G NAND flash */ |
| |
| /* |
| * NOR boot support - single 1 Gbit PF48F6000M0 Strataflash |
| */ |
| #define CONFIG_SYS_FLASH_BASE 0x10000000 |
| #define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ |
| #define CONFIG_SYS_FLASH_CFI 1 /* use CFI geometry data */ |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster writes */ |
| #define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware sector protection */ |
| #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* flinfo 'E' for empty */ |
| #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ |
| |
| #define CONFIG_SYS_FLASH_CFI_WIDTH 2 |
| #define PHYS_FLASH_SIZE (128 << 20) |
| #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors on one chip */ |
| |
| /* OMITTED: single 2 Gbit KFM2G16 OneNAND flash */ |
| |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_SYS_ENV_SECT_SIZE (256 << 10) |
| #define CONFIG_ENV_OFFSET CONFIG_SYS_ENV_SECT_SIZE |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE) |
| /*--------------------------------------------------------------------------*/ |
| |
| /* commands to include */ |
| #include <config_cmd_default.h> |
| |
| /* Enabled commands */ |
| #define CONFIG_CMD_DHCP /* DHCP Support */ |
| #define CONFIG_CMD_EXT2 /* EXT2 Support */ |
| #define CONFIG_CMD_FAT /* FAT support */ |
| #define CONFIG_CMD_I2C /* I2C serial bus support */ |
| #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ |
| #define CONFIG_CMD_MMC /* MMC support */ |
| #define CONFIG_CMD_NET |
| |
| /* Disabled commands */ |
| #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ |
| #undef CONFIG_CMD_IMLS /* List all found images */ |
| |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * MMC boot support |
| */ |
| |
| #if defined(CONFIG_CMD_MMC) |
| #define CONFIG_GENERIC_MMC 1 |
| #define CONFIG_MMC 1 |
| #define CONFIG_OMAP_HSMMC 1 |
| #define CONFIG_DOS_PARTITION 1 |
| #endif |
| |
| /*---------------------------------------------------------------------------- |
| * SMSC9115 Ethernet from SMSC9118 family |
| *---------------------------------------------------------------------------- |
| */ |
| #if defined(CONFIG_CMD_NET) |
| |
| #define CONFIG_LAN91C96 |
| #define CONFIG_LAN91C96_BASE DEBUG_BASE |
| #define CONFIG_LAN91C96_EXT_PHY |
| |
| #define CONFIG_BOOTP_SEND_HOSTNAME |
| /* |
| * BOOTP fields |
| */ |
| #define CONFIG_BOOTP_SUBNETMASK 0x00000001 |
| #define CONFIG_BOOTP_GATEWAY 0x00000002 |
| #define CONFIG_BOOTP_HOSTNAME 0x00000004 |
| #define CONFIG_BOOTP_BOOTPATH 0x00000010 |
| #endif /* (CONFIG_CMD_NET) */ |
| |
| /* |
| * Environment setup |
| * |
| * Default boot order: mmc bootscript, MMC uImage, NOR image. |
| * Network booting environment must be configured at site. |
| */ |
| |
| /* allow overwriting serial config and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "loadaddr=0x82000000\0" \ |
| "console=ttyS0,115200n8\0" \ |
| "mmcargs=setenv bootargs console=${console} " \ |
| "root=/dev/mmcblk0p2 rw " \ |
| "rootfstype=ext3 rootwait\0" \ |
| "norargs=setenv bootargs console=${console} " \ |
| "root=/dev/mtdblock3 rw " \ |
| "rootfstype=jffs2\0" \ |
| "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ |
| "bootscript=echo Running bootscript from MMC/SD ...; " \ |
| "autoscr ${loadaddr}\0" \ |
| "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ |
| "mmcboot=echo Booting from MMC/SD ...; " \ |
| "run mmcargs; " \ |
| "bootm ${loadaddr}\0" \ |
| "norboot=echo Booting from NOR ...; " \ |
| "run norargs; " \ |
| "bootm 0x80000\0" \ |
| |
| #define CONFIG_BOOTCOMMAND \ |
| "if mmcinit; then " \ |
| "if run loadbootscript; then " \ |
| "run bootscript; " \ |
| "else " \ |
| "if run loaduimage; then " \ |
| "run mmcboot; " \ |
| "else run norboot; " \ |
| "fi; " \ |
| "fi; " \ |
| "else run norboot; fi" |
| |
| #define CONFIG_AUTO_COMPLETE 1 |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| #define CONFIG_SYS_PROMPT "OMAP34XX SDP # " |
| #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
| sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) |
| |
| /* SDRAM Test range - start at 16 meg boundary -ends at 32Meg - |
| * a basic sanity check ONLY |
| * IF you would like to increase coverage, increase the end address |
| * or run the test with custom options |
| */ |
| #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000) |
| #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + (32 << 20)) |
| |
| /* Default load address */ |
| #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| /* |
| * 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by |
| * 32KHz clk, or from external sig. This rate is divided by a local divisor. |
| */ |
| #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) |
| #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ |
| #define CONFIG_SYS_HZ 1000 |
| |
| /* |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ |
| #endif |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x800 |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
| CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| /* |
| * SDRAM Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ |
| #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 |
| #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */ |
| #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 |
| |
| /* SDRAM Bank Allocation method */ |
| #define SDRC_R_B_C 1 |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| /* |
| * NOR FLASH usage ... default nCS0: |
| * - one 256KB sector for U-Boot |
| * - one 256KB sector for its parameters (not all used) |
| * - eight sectors (2 MB) for kernel |
| * - rest for JFFS2 |
| */ |
| |
| /* Monitor at start of flash */ |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_MONITOR_LEN (256 << 10) |
| |
| /* |
| * NAND FLASH usage ... default nCS1: |
| * - four 128KB sectors for X-Loader |
| * - four 128KB sectors for U-Boot |
| * - two 128KB sector for its parameters |
| * - 32 sectors (4 MB) for kernel |
| * - rest for filesystem |
| */ |
| |
| /* |
| * OneNAND FLASH usage ... default nCS2: |
| * - four 128KB sectors for X-Loader |
| * - two 128KB sectors for U-Boot |
| * - one 128KB sector for its parameters |
| * - sixteen sectors (2 MB) for kernel |
| * - rest for filesystem |
| */ |
| |
| #define CONFIG_SYS_CACHELINE_SIZE 64 |
| |
| #endif /* __CONFIG_H */ |