arm: mach-k3: Move SYS_K3_SPL_ATF definition into R5 Kconfig
Loading ATF is only supported from the R5, move the Kconfig symbol
definition to match.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index fdde67c..cb83bd2 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -116,13 +116,6 @@
Use this option to set the index of the serial device to be used
for the early console during SPL execution.
-config SYS_K3_SPL_ATF
- bool "Start Cortex-A from SPL"
- depends on CPU_V7R
- help
- Enabling this will try to start Cortex-A (typically with ATF)
- after SPL from R5.
-
config K3_ATF_LOAD_ADDR
hex "Load address of ATF image"
default 0x70000000
diff --git a/arch/arm/mach-k3/r5/Kconfig b/arch/arm/mach-k3/r5/Kconfig
index ae79f8f..317a6c4 100644
--- a/arch/arm/mach-k3/r5/Kconfig
+++ b/arch/arm/mach-k3/r5/Kconfig
@@ -43,3 +43,9 @@
help
Offset of the combined System Firmware and configuration image tree
blob to be loaded when booting from a SPI flash memory.
+
+config SYS_K3_SPL_ATF
+ bool "Start Cortex-A from SPL"
+ help
+ Enabling this will try to start Cortex-A (typically with ATF)
+ after SPL from R5.