diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index e317373..a72f34f 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -200,6 +200,7 @@
 config MT76X8_USB_PHY
 	bool "MediaTek MT76x8 (7628/88) USB PHY support"
 	depends on PHY
+	depends on SOC_MT7628
 	help
           Support the USB PHY in MT76x8 SoCs
 
diff --git a/drivers/phy/mt76x8-usb-phy.c b/drivers/phy/mt76x8-usb-phy.c
index 268da8e..1e7c5f3 100644
--- a/drivers/phy/mt76x8-usb-phy.c
+++ b/drivers/phy/mt76x8-usb-phy.c
@@ -6,93 +6,185 @@
  *     Copyright (C) 2017 John Crispin <john@phrozen.org>
  */
 
+#include <clk.h>
 #include <common.h>
 #include <dm.h>
 #include <generic-phy.h>
-#include <regmap.h>
-#include <reset-uclass.h>
-#include <syscon.h>
+#include <reset.h>
 #include <asm/io.h>
-
-#define RT_SYSC_REG_SYSCFG1		0x014
-#define RT_SYSC_REG_CLKCFG1		0x030
-#define RT_SYSC_REG_USB_PHY_CFG		0x05c
+#include <linux/bitops.h>
 
 #define OFS_U2_PHY_AC0			0x800
+#define USBPLL_FBDIV_S			16
+#define USBPLL_FBDIV_M			GENMASK(22, 16)
+#define BG_TRIM_S			8
+#define BG_TRIM_M			GENMASK(11, 8)
+#define BG_RBSEL_S			6
+#define BG_RBSEL_M			GENMASK(7, 6)
+#define BG_RASEL_S			4
+#define BG_RASEL_M			GENMASK(5, 4)
+#define BGR_DIV_S			2
+#define BGR_DIV_M			GENMASK(3, 2)
+#define CHP_EN				BIT(1)
+
 #define OFS_U2_PHY_AC1			0x804
+#define VRT_VREF_SEL_S			28
+#define VRT_VREF_SEL_M			GENMASK(30, 28)
+#define TERM_VREF_SEL_S			24
+#define TERM_VREF_SEL_M			GENMASK(26, 24)
+#define USBPLL_RSVD			BIT(4)
+#define USBPLL_ACCEN			BIT(3)
+#define USBPLL_LF			BIT(2)
+
 #define OFS_U2_PHY_AC2			0x808
+
 #define OFS_U2_PHY_ACR0			0x810
-#define OFS_U2_PHY_ACR1			0x814
-#define OFS_U2_PHY_ACR2			0x818
+#define HSTX_SRCAL_EN			BIT(23)
+#define HSTX_SRCTRL_S			16
+#define HSTX_SRCTRL_M			GENMASK(18, 16)
+
 #define OFS_U2_PHY_ACR3			0x81C
-#define OFS_U2_PHY_ACR4			0x820
-#define OFS_U2_PHY_AMON0		0x824
+#define HSTX_DBIST_S			28
+#define HSTX_DBIST_M			GENMASK(31, 28)
+#define HSRX_BIAS_EN_SEL_S		20
+#define HSRX_BIAS_EN_SEL_M		GENMASK(21, 20)
+
 #define OFS_U2_PHY_DCR0			0x860
-#define OFS_U2_PHY_DCR1			0x864
+#define PHYD_RESERVE_S			8
+#define PHYD_RESERVE_M			GENMASK(23, 8)
+#define CDR_FILT_S			0
+#define CDR_FILT_M			GENMASK(3, 0)
+
 #define OFS_U2_PHY_DTM0			0x868
-#define OFS_U2_PHY_DTM1			0x86C
+#define FORCE_USB_CLKEN			BIT(25)
 
-#define RT_RSTCTRL_UDEV			BIT(25)
-#define RT_RSTCTRL_UHST			BIT(22)
-#define RT_SYSCFG1_USB0_HOST_MODE	BIT(10)
+#define OFS_FM_CR0			0xf00
+#define FREQDET_EN			BIT(24)
+#define CYCLECNT_S			0
+#define CYCLECNT_M			GENMASK(23, 0)
 
-#define MT7620_CLKCFG1_UPHY0_CLK_EN	BIT(25)
-#define MT7620_CLKCFG1_UPHY1_CLK_EN	BIT(22)
-#define RT_CLKCFG1_UPHY1_CLK_EN		BIT(20)
-#define RT_CLKCFG1_UPHY0_CLK_EN		BIT(18)
+#define OFS_FM_MONR0			0xf0c
 
-#define USB_PHY_UTMI_8B60M		BIT(1)
-#define UDEV_WAKEUP			BIT(0)
+#define OFS_FM_MONR1			0xf10
+#define FRCK_EN				BIT(8)
+
+#define U2_SR_COEF_7628			32
 
 struct mt76x8_usb_phy {
-	u32			clk;
 	void __iomem		*base;
-	struct regmap		*sysctl;
+	struct clk		cg;	/* for clock gating */
+	struct reset_ctl	rst_phy;
 };
 
-static void u2_phy_w32(struct mt76x8_usb_phy *phy, u32 val, u32 reg)
+static void phy_w32(struct mt76x8_usb_phy *phy, u32 reg, u32 val)
 {
 	writel(val, phy->base + reg);
 }
 
-static u32 u2_phy_r32(struct mt76x8_usb_phy *phy, u32 reg)
+static u32 phy_r32(struct mt76x8_usb_phy *phy, u32 reg)
 {
 	return readl(phy->base + reg);
 }
 
+static void phy_rmw32(struct mt76x8_usb_phy *phy, u32 reg, u32 clr, u32 set)
+{
+	clrsetbits_32(phy->base + reg, clr, set);
+}
+
 static void mt76x8_usb_phy_init(struct mt76x8_usb_phy *phy)
 {
+	phy_r32(phy, OFS_U2_PHY_AC2);
+	phy_r32(phy, OFS_U2_PHY_ACR0);
+	phy_r32(phy, OFS_U2_PHY_DCR0);
+
+	phy_w32(phy, OFS_U2_PHY_DCR0,
+		(0xffff << PHYD_RESERVE_S) | (2 << CDR_FILT_S));
+	phy_r32(phy, OFS_U2_PHY_DCR0);
+
+	phy_w32(phy, OFS_U2_PHY_DCR0,
+		(0x5555 << PHYD_RESERVE_S) | (2 << CDR_FILT_S));
+	phy_r32(phy, OFS_U2_PHY_DCR0);
+
+	phy_w32(phy, OFS_U2_PHY_DCR0,
+		(0xaaaa << PHYD_RESERVE_S) | (2 << CDR_FILT_S));
+	phy_r32(phy, OFS_U2_PHY_DCR0);
+
+	phy_w32(phy, OFS_U2_PHY_DCR0,
+		(4 << PHYD_RESERVE_S) | (2 << CDR_FILT_S));
+	phy_r32(phy, OFS_U2_PHY_DCR0);
+
+	phy_w32(phy, OFS_U2_PHY_AC0,
+		(0x48 << USBPLL_FBDIV_S) | (8 << BG_TRIM_S) |
+		(1 << BG_RBSEL_S) | (2 << BG_RASEL_S) | (2 << BGR_DIV_S) |
+		CHP_EN);
+
+	phy_w32(phy, OFS_U2_PHY_AC1,
+		(4 << VRT_VREF_SEL_S) | (4 << TERM_VREF_SEL_S) | USBPLL_RSVD |
+		USBPLL_ACCEN | USBPLL_LF);
+
+	phy_w32(phy, OFS_U2_PHY_ACR3,
+		(12 << HSTX_DBIST_S) | (2 << HSRX_BIAS_EN_SEL_S));
+
+	phy_w32(phy, OFS_U2_PHY_DTM0, FORCE_USB_CLKEN);
+}
+
+static void mt76x8_usb_phy_sr_calibrate(struct mt76x8_usb_phy *phy)
+{
-	u2_phy_r32(phy, OFS_U2_PHY_AC2);
-	u2_phy_r32(phy, OFS_U2_PHY_ACR0);
-	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u32 fmout, tmp = 4;
+	int i;
+
+	/* Enable HS TX SR calibration */
+	phy_rmw32(phy, OFS_U2_PHY_ACR0, 0, HSTX_SRCAL_EN);
+	mdelay(1);
+
+	/* Enable free run clock */
+	phy_rmw32(phy, OFS_FM_MONR1, 0, FRCK_EN);
 
-	u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
-	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-	u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
-	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-	u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
-	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-	u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
-	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-	u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
-	u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
-	u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
-	u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
+	/* Set cycle count = 0x400 */
+	phy_rmw32(phy, OFS_FM_CR0, CYCLECNT_M, 0x400 << CYCLECNT_S);
+
+	/* Enable frequency meter */
+	phy_rmw32(phy, OFS_FM_CR0, 0, FREQDET_EN);
+
+	/* Wait for FM detection done, set timeout to 10ms */
+	for (i = 0; i < 10; i++) {
+		fmout = phy_r32(phy, OFS_FM_MONR0);
+
+		if (fmout)
+			break;
+
+		mdelay(1);
+	}
+
+	/* Disable frequency meter */
+	phy_rmw32(phy, OFS_FM_CR0, FREQDET_EN, 0);
+
+	/* Disable free run clock */
+	phy_rmw32(phy, OFS_FM_MONR1, FRCK_EN, 0);
+
+	/* Disable HS TX SR calibration */
+	phy_rmw32(phy, OFS_U2_PHY_ACR0, HSTX_SRCAL_EN, 0);
+	mdelay(1);
+
+	if (fmout) {
+		/*
+		 * set reg = (1024 / FM_OUT) * 25 * 0.028
+		 * (round to the nearest digits)
+		 */
+		tmp = (((1024 * 25 * U2_SR_COEF_7628) / fmout) + 500) / 1000;
+	}
+
+	phy_rmw32(phy, OFS_U2_PHY_ACR0, HSTX_SRCTRL_M,
+		  (tmp << HSTX_SRCTRL_S) & HSTX_SRCTRL_M);
 }
 
 static int mt76x8_usb_phy_power_on(struct phy *_phy)
 {
 	struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev);
-	u32 t;
 
-	/* enable the phy */
-	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
-			   phy->clk, phy->clk);
+	clk_enable(&phy->cg);
 
-	/* setup host mode */
-	regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
-			   RT_SYSCFG1_USB0_HOST_MODE,
-			   RT_SYSCFG1_USB0_HOST_MODE);
+	reset_deassert(&phy->rst_phy);
 
 	/*
 	 * The SDK kernel had a delay of 100ms. however on device
@@ -100,17 +192,8 @@
 	 */
 	mdelay(10);
 
-	if (phy->base)
-		mt76x8_usb_phy_init(phy);
-
-	/* print some status info */
-	regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
-	printf("remote usb device wakeup %s\n",
-	       (t & UDEV_WAKEUP) ? "enabled" : "disabled");
-	if (t & USB_PHY_UTMI_8B60M)
-		printf("UTMI 8bit 60MHz\n");
-	else
-		printf("UTMI 16bit 30MHz\n");
+	mt76x8_usb_phy_init(phy);
+	mt76x8_usb_phy_sr_calibrate(phy);
 
 	return 0;
 }
@@ -119,9 +202,9 @@
 {
 	struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev);
 
-	/* disable the phy */
-	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
-			   phy->clk, 0);
+	clk_disable(&phy->cg);
+
+	reset_assert(&phy->rst_phy);
 
 	return 0;
 }
@@ -129,15 +212,21 @@
 static int mt76x8_usb_phy_probe(struct udevice *dev)
 {
 	struct mt76x8_usb_phy *phy = dev_get_priv(dev);
-
-	phy->sysctl = syscon_regmap_lookup_by_phandle(dev, "ralink,sysctl");
-	if (IS_ERR(phy->sysctl))
-		return PTR_ERR(phy->sysctl);
+	int ret;
 
 	phy->base = dev_read_addr_ptr(dev);
 	if (!phy->base)
 		return -EINVAL;
 
+	/* clock gate */
+	ret = clk_get_by_name(dev, "cg", &phy->cg);
+	if (ret)
+		return ret;
+
+	ret = reset_get_by_name(dev, "phy", &phy->rst_phy);
+	if (ret)
+		return ret;
+
 	return 0;
 }