net: sunxi: Enable eeprom on OLinuXino Lime boards
This patch enables the I2C EEPROM to be probed for a MAC address on the
OLinuXino Lime1 and Lime2 boards. Other boards surely qualify as well
but were not tested yet.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index 1cd3f1f..6634139 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -14,6 +14,10 @@
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_NET_ETHADDR_EEPROM=y
+CONFIG_NET_ETHADDR_EEPROM_I2C=y
+CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
+CONFIG_I2C1_ENABLE=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index a4ade72..4c720b3 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -21,6 +21,10 @@
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DFU_RAM=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_NET_ETHADDR_EEPROM=y
+CONFIG_NET_ETHADDR_EEPROM_I2C=y
+CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
+CONFIG_I2C1_ENABLE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index 4fe4e4a..564ae25 100644
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -16,6 +16,10 @@
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
+CONFIG_NET_ETHADDR_EEPROM=y
+CONFIG_NET_ETHADDR_EEPROM_I2C=y
+CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
+CONFIG_I2C1_ENABLE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index e1d91e3..93be13b 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -19,6 +19,10 @@
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_ETH_DESIGNWARE=y
+CONFIG_NET_ETHADDR_EEPROM=y
+CONFIG_NET_ETHADDR_EEPROM_I2C=y
+CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
+CONFIG_I2C1_ENABLE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y