arch/arm/include/asm/system.h - filogic/uboot - Gitiles

 #ifndef __ASM_ARM_SYSTEM_H
 #define __ASM_ARM_SYSTEM_H

 #include <linux/compiler.h>
 #include <asm/barriers.h>

 #ifdef CONFIG_ARM64

 /*
  * SCTLR_EL1/SCTLR_EL2/SCTLR_EL3 bits definitions
  */
 #define CR_M		(1 << 0)	/* MMU enable			*/
 #define CR_A		(1 << 1)	/* Alignment abort enable	*/
 #define CR_C		(1 << 2)	/* Dcache enable		*/
 #define CR_SA		(1 << 3)	/* Stack Alignment Check Enable	*/
 #define CR_I		(1 << 12)	/* Icache enable		*/
 #define CR_WXN		(1 << 19)	/* Write Permision Imply XN	*/
 #define CR_EE		(1 << 25)	/* Exception (Big) Endian	*/

 #define ES_TO_AARCH64		1
 #define ES_TO_AARCH32		0

 /*
  * SCR_EL3 bits definitions
  */
 #define SCR_EL3_RW_AARCH64	(1 << 10) /* Next lower level is AArch64     */
 #define SCR_EL3_RW_AARCH32	(0 << 10) /* Lower lowers level are AArch32  */
 #define SCR_EL3_HCE_EN		(1 << 8)  /* Hypervisor Call enable          */
 #define SCR_EL3_SMD_DIS		(1 << 7)  /* Secure Monitor Call disable     */
 #define SCR_EL3_RES1		(3 << 4)  /* Reserved, RES1                  */
 #define SCR_EL3_EA_EN		(1 << 3)  /* External aborts taken to EL3    */
 #define SCR_EL3_NS_EN		(1 << 0)  /* EL0 and EL1 in Non-scure state  */

 /*
  * SPSR_EL3/SPSR_EL2 bits definitions
  */
 #define SPSR_EL_END_LE		(0 << 9)  /* Exception Little-endian          */
 #define SPSR_EL_DEBUG_MASK	(1 << 9)  /* Debug exception masked           */
 #define SPSR_EL_ASYN_MASK	(1 << 8)  /* Asynchronous data abort masked   */
 #define SPSR_EL_SERR_MASK	(1 << 8)  /* System Error exception masked    */
 #define SPSR_EL_IRQ_MASK	(1 << 7)  /* IRQ exception masked             */
 #define SPSR_EL_FIQ_MASK	(1 << 6)  /* FIQ exception masked             */
 #define SPSR_EL_T_A32		(0 << 5)  /* AArch32 instruction set A32      */
 #define SPSR_EL_M_AARCH64	(0 << 4)  /* Exception taken from AArch64     */
 #define SPSR_EL_M_AARCH32	(1 << 4)  /* Exception taken from AArch32     */
 #define SPSR_EL_M_SVC		(0x3)     /* Exception taken from SVC mode    */
 #define SPSR_EL_M_HYP		(0xa)     /* Exception taken from HYP mode    */
 #define SPSR_EL_M_EL1H		(5)       /* Exception taken from EL1h mode   */
 #define SPSR_EL_M_EL2H		(9)       /* Exception taken from EL2h mode   */

 /*
  * CPTR_EL2 bits definitions
  */
 #define CPTR_EL2_RES1		(3 << 12 | 0x3ff)           /* Reserved, RES1 */

 /*
  * SCTLR_EL2 bits definitions
  */
 #define SCTLR_EL2_RES1		(3 << 28 | 3 << 22 | 1 << 18 | 1 << 16 |\
 				 1 << 11 | 3 << 4)	    /* Reserved, RES1 */
 #define SCTLR_EL2_EE_LE		(0 << 25) /* Exception Little-endian          */
 #define SCTLR_EL2_WXN_DIS	(0 << 19) /* Write permission is not XN       */
 #define SCTLR_EL2_ICACHE_DIS	(0 << 12) /* Instruction cache disabled       */
 #define SCTLR_EL2_SA_DIS	(0 << 3)  /* Stack Alignment Check disabled   */
 #define SCTLR_EL2_DCACHE_DIS	(0 << 2)  /* Data cache disabled              */
 #define SCTLR_EL2_ALIGN_DIS	(0 << 1)  /* Alignment check disabled         */
 #define SCTLR_EL2_MMU_DIS	(0)       /* MMU disabled                     */

 /*
  * CNTHCTL_EL2 bits definitions
  */
 #define CNTHCTL_EL2_EL1PCEN_EN	(1 << 1)  /* Physical timer regs accessible   */
 #define CNTHCTL_EL2_EL1PCTEN_EN	(1 << 0)  /* Physical counter accessible      */

 /*
  * HCR_EL2 bits definitions
  */
 #define HCR_EL2_RW_AARCH64	(1 << 31) /* EL1 is AArch64                   */
 #define HCR_EL2_RW_AARCH32	(0 << 31) /* Lower levels are AArch32         */
 #define HCR_EL2_HCD_DIS		(1 << 29) /* Hypervisor Call disabled         */

 /*
  * CPACR_EL1 bits definitions
  */
 #define CPACR_EL1_FPEN_EN	(3 << 20) /* SIMD and FP instruction enabled  */

 /*
  * SCTLR_EL1 bits definitions
  */
 #define SCTLR_EL1_RES1		(3 << 28 | 3 << 22 | 1 << 20 |\
 				 1 << 11) /* Reserved, RES1                   */
 #define SCTLR_EL1_UCI_DIS	(0 << 26) /* Cache instruction disabled       */
 #define SCTLR_EL1_EE_LE		(0 << 25) /* Exception Little-endian          */
 #define SCTLR_EL1_WXN_DIS	(0 << 19) /* Write permission is not XN       */
 #define SCTLR_EL1_NTWE_DIS	(0 << 18) /* WFE instruction disabled         */
 #define SCTLR_EL1_NTWI_DIS	(0 << 16) /* WFI instruction disabled         */
 #define SCTLR_EL1_UCT_DIS	(0 << 15) /* CTR_EL0 access disabled          */
 #define SCTLR_EL1_DZE_DIS	(0 << 14) /* DC ZVA instruction disabled      */
 #define SCTLR_EL1_ICACHE_DIS	(0 << 12) /* Instruction cache disabled       */
 #define SCTLR_EL1_UMA_DIS	(0 << 9)  /* User Mask Access disabled        */
 #define SCTLR_EL1_SED_EN	(0 << 8)  /* SETEND instruction enabled       */
 #define SCTLR_EL1_ITD_EN	(0 << 7)  /* IT instruction enabled           */
 #define SCTLR_EL1_CP15BEN_DIS	(0 << 5)  /* CP15 barrier operation disabled  */
 #define SCTLR_EL1_SA0_DIS	(0 << 4)  /* Stack Alignment EL0 disabled     */
 #define SCTLR_EL1_SA_DIS	(0 << 3)  /* Stack Alignment EL1 disabled     */
 #define SCTLR_EL1_DCACHE_DIS	(0 << 2)  /* Data cache disabled              */
 #define SCTLR_EL1_ALIGN_DIS	(0 << 1)  /* Alignment check disabled         */
 #define SCTLR_EL1_MMU_DIS	(0)       /* MMU disabled                     */

 #ifndef __ASSEMBLY__

 struct pt_regs;

 u64 get_page_table_size(void);
 #define PGTABLE_SIZE	get_page_table_size()

 /* 2MB granularity */
 #define MMU_SECTION_SHIFT	21
 #define MMU_SECTION_SIZE	(1 << MMU_SECTION_SHIFT)

 /* These constants need to be synced to the MT_ types in asm/armv8/mmu.h */
 enum dcache_option {
 	DCACHE_OFF = 0 << 2,
 	DCACHE_WRITETHROUGH = 3 << 2,
 	DCACHE_WRITEBACK = 4 << 2,
 	DCACHE_WRITEALLOC = 4 << 2,
 };

 #define wfi()				\
 	({asm volatile(			\
 	"wfi" : : : "memory");		\
 	})

 static inline unsigned int current_el(void)
 {
 	unsigned long el;

 	asm volatile("mrs %0, CurrentEL" : "=r" (el) : : "cc");
 	return 3 & (el >> 2);
 }

 static inline unsigned int get_sctlr(void)
 {
 	unsigned int el;
 	unsigned long val;

 	el = current_el();
 	if (el == 1)
 		asm volatile("mrs %0, sctlr_el1" : "=r" (val) : : "cc");
 	else if (el == 2)
 		asm volatile("mrs %0, sctlr_el2" : "=r" (val) : : "cc");
 	else
 		asm volatile("mrs %0, sctlr_el3" : "=r" (val) : : "cc");

 	return val;
 }

 static inline void set_sctlr(unsigned long val)
 {
 	unsigned int el;

 	el = current_el();
 	if (el == 1)
 		asm volatile("msr sctlr_el1, %0" : : "r" (val) : "cc");
 	else if (el == 2)
 		asm volatile("msr sctlr_el2, %0" : : "r" (val) : "cc");
 	else
 		asm volatile("msr sctlr_el3, %0" : : "r" (val) : "cc");

 	asm volatile("isb");
 }

 static inline unsigned long read_mpidr(void)
 {
 	unsigned long val;

 	asm volatile("mrs %0, mpidr_el1" : "=r" (val));

 	return val;
 }

 #define BSP_COREID	0

 void __asm_flush_dcache_all(void);
 void __asm_invalidate_dcache_all(void);
 void __asm_flush_dcache_range(u64 start, u64 end);

 /**
  * __asm_invalidate_dcache_range() - Invalidate a range of virtual addresses
  *
  * This performance an invalidate from @start to @end - 1. Both addresses
  * should be cache-aligned, otherwise this function will align the start
  * address and may continue past the end address.
  *
  * Data in the address range is evicted from the cache and is not written back
  * to memory.
  *
  * @start: Start address to invalidate
  * @end: End address to invalidate up to (exclusive)
  */
 void __asm_invalidate_dcache_range(u64 start, u64 end);
 void __asm_invalidate_tlb_all(void);
 void __asm_invalidate_icache_all(void);
 int __asm_invalidate_l3_dcache(void);
 int __asm_flush_l3_dcache(void);
 int __asm_invalidate_l3_icache(void);
 void __asm_switch_ttbr(u64 new_ttbr);

 /*
  * armv8_switch_to_el2() - switch from EL3 to EL2 for ARMv8
  *
  * @args:        For loading 64-bit OS, fdt address.
  *               For loading 32-bit OS, zero.
  * @mach_nr:     For loading 64-bit OS, zero.
  *               For loading 32-bit OS, machine nr
  * @fdt_addr:    For loading 64-bit OS, zero.
  *               For loading 32-bit OS, fdt address.
  * @arg4:	 Input argument.
  * @entry_point: kernel entry point
  * @es_flag:     execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
  */
 void __noreturn armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr,
 				    u64 arg4, u64 entry_point, u64 es_flag);
 /*
  * armv8_switch_to_el1() - switch from EL2 to EL1 for ARMv8
  *
  * @args:        For loading 64-bit OS, fdt address.
  *               For loading 32-bit OS, zero.
  * @mach_nr:     For loading 64-bit OS, zero.
  *               For loading 32-bit OS, machine nr
  * @fdt_addr:    For loading 64-bit OS, zero.
  *               For loading 32-bit OS, fdt address.
  * @arg4:	 Input argument.
  * @entry_point: kernel entry point
  * @es_flag:     execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
  */
 void armv8_switch_to_el1(u64 args, u64 mach_nr, u64 fdt_addr,
 			 u64 arg4, u64 entry_point, u64 es_flag);
 void armv8_el2_to_aarch32(u64 args, u64 mach_nr, u64 fdt_addr,
 			  u64 arg4, u64 entry_point);
 void gic_init(void);
 void gic_send_sgi(unsigned long sgino);
 void wait_for_wakeup(void);
 void protect_secure_region(void);
 void smp_kick_all_cpus(void);

 void flush_l3_cache(void);
 void mmu_change_region_attr(phys_addr_t start, size_t size, u64 attrs);

 /*
  * smc_call() - issue a secure monitor call
  *
  * Issue a secure monitor call in accordance with ARM "SMC Calling convention",
  * DEN0028A
  *
  * @args: input and output arguments
  */
 void smc_call(struct pt_regs *args);

 void __noreturn psci_system_reset(void);
 void __noreturn psci_system_reset2(u32 reset_level, u32 cookie);
 void __noreturn psci_system_off(void);

 #ifdef CONFIG_ARMV8_PSCI
 extern char __secure_start[];
 extern char __secure_end[];
 extern char __secure_stack_start[];
 extern char __secure_stack_end[];

 void armv8_setup_psci(void);
 void psci_setup_vectors(void);
 void psci_arch_init(void);
 #endif

 #endif	/* __ASSEMBLY__ */

 #else /* CONFIG_ARM64 */

 #ifdef __KERNEL__

 #define CPU_ARCH_UNKNOWN	0
 #define CPU_ARCH_ARMv3		1
 #define CPU_ARCH_ARMv4		2
 #define CPU_ARCH_ARMv4T		3
 #define CPU_ARCH_ARMv5		4
 #define CPU_ARCH_ARMv5T		5
 #define CPU_ARCH_ARMv5TE	6
 #define CPU_ARCH_ARMv5TEJ	7
 #define CPU_ARCH_ARMv6		8
 #define CPU_ARCH_ARMv7		9

 /*
  * CR1 bits (CP#15 CR1)
  */
 #define CR_M	(1 << 0)	/* MMU enable				*/
 #define CR_A	(1 << 1)	/* Alignment abort enable		*/
 #define CR_C	(1 << 2)	/* Dcache enable			*/
 #define CR_W	(1 << 3)	/* Write buffer enable			*/
 #define CR_P	(1 << 4)	/* 32-bit exception handler		*/
 #define CR_D	(1 << 5)	/* 32-bit data address range		*/
 #define CR_L	(1 << 6)	/* Implementation defined		*/
 #define CR_B	(1 << 7)	/* Big endian				*/
 #define CR_S	(1 << 8)	/* System MMU protection		*/
 #define CR_R	(1 << 9)	/* ROM MMU protection			*/
 #define CR_F	(1 << 10)	/* Implementation defined		*/
 #define CR_Z	(1 << 11)	/* Implementation defined		*/
 #define CR_I	(1 << 12)	/* Icache enable			*/
 #define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
 #define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
 #define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
 #define CR_DT	(1 << 16)
 #define CR_IT	(1 << 18)
 #define CR_ST	(1 << 19)
 #define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
 #define CR_U	(1 << 22)	/* Unaligned access operation		*/
 #define CR_XP	(1 << 23)	/* Extended page tables			*/
 #define CR_VE	(1 << 24)	/* Vectored interrupts			*/
 #define CR_EE	(1 << 25)	/* Exception (Big) Endian		*/
 #define CR_TRE	(1 << 28)	/* TEX remap enable			*/
 #define CR_AFE	(1 << 29)	/* Access flag enable			*/
 #define CR_TE	(1 << 30)	/* Thumb exception enable		*/

 #if defined(CONFIG_ARMV7_LPAE) && !defined(PGTABLE_SIZE)
 #define PGTABLE_SIZE		(4096 * 5)
 #elif !defined(PGTABLE_SIZE)
 #define PGTABLE_SIZE		(4096 * 4)
 #endif

 /*
  * This is used to ensure the compiler did actually allocate the register we
  * asked it for some inline assembly sequences.  Apparently we can't trust
  * the compiler from one version to another so a bit of paranoia won't hurt.
  * This string is meant to be concatenated with the inline asm string and
  * will cause compilation to stop on mismatch.
  * (for details, see gcc PR 15089)
  */
 #define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"

 #ifndef __ASSEMBLY__

 #ifdef CONFIG_ARMV7_LPAE
 void switch_to_hypervisor_ret(void);
 #endif

 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");

 #ifdef __ARM_ARCH_7A__
 #define wfi() __asm__ __volatile__ ("wfi" : : : "memory")
 #else
 #define wfi()
 #endif

 static inline unsigned long get_cpsr(void)
 {
 	unsigned long cpsr;

 	asm volatile("mrs %0, cpsr" : "=r"(cpsr): );
 	return cpsr;
 }

 static inline int is_hyp(void)
 {
 #ifdef CONFIG_ARMV7_LPAE
 	/* HYP mode requires LPAE ... */
 	return ((get_cpsr() & 0x1f) == 0x1a);
 #else
 	/* ... so without LPAE support we can optimize all hyp code away */
 	return 0;
 #endif
 }

 static inline unsigned int get_cr(void)
 {
 	unsigned int val;

 	if (is_hyp())
 		asm volatile("mrc p15, 4, %0, c1, c0, 0	@ get CR" : "=r" (val)
 								  :
 								  : "cc");
 	else
 		asm volatile("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val)
 								  :
 								  : "cc");
 	return val;
 }

 static inline void set_cr(unsigned int val)
 {
 	if (is_hyp())
 		asm volatile("mcr p15, 4, %0, c1, c0, 0	@ set CR" :
 								  : "r" (val)
 								  : "cc");
 	else
 		asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR" :
 								  : "r" (val)
 								  : "cc");
 	isb();
 }

 static inline unsigned int get_dacr(void)
 {
 	unsigned int val;
 	asm("mrc p15, 0, %0, c3, c0, 0	@ get DACR" : "=r" (val) : : "cc");
 	return val;
 }

 static inline void set_dacr(unsigned int val)
 {
 	asm volatile("mcr p15, 0, %0, c3, c0, 0	@ set DACR"
 	  : : "r" (val) : "cc");
 	isb();
 }

 #ifdef CONFIG_ARMV7_LPAE
 /* Long-Descriptor Translation Table Level 1/2 Bits */
 #define TTB_SECT_XN_MASK	(1ULL << 54)
 #define TTB_SECT_NG_MASK	(1 << 11)
 #define TTB_SECT_AF		(1 << 10)
 #define TTB_SECT_SH_MASK	(3 << 8)
 #define TTB_SECT_NS_MASK	(1 << 5)
 #define TTB_SECT_AP		(1 << 6)
 /* Note: TTB AP bits are set elsewhere */
 #define TTB_SECT_MAIR(x)	((x & 0x7) << 2) /* Index into MAIR */
 #define TTB_SECT		(1 << 0)
 #define TTB_PAGETABLE		(3 << 0)

 /* TTBCR flags */
 #define TTBCR_EAE		(1 << 31)
 #define TTBCR_T0SZ(x)		((x) << 0)
 #define TTBCR_T1SZ(x)		((x) << 16)
 #define TTBCR_USING_TTBR0	(TTBCR_T0SZ(0) | TTBCR_T1SZ(0))
 #define TTBCR_IRGN0_NC		(0 << 8)
 #define TTBCR_IRGN0_WBWA	(1 << 8)
 #define TTBCR_IRGN0_WT		(2 << 8)
 #define TTBCR_IRGN0_WBNWA	(3 << 8)
 #define TTBCR_IRGN0_MASK	(3 << 8)
 #define TTBCR_ORGN0_NC		(0 << 10)
 #define TTBCR_ORGN0_WBWA	(1 << 10)
 #define TTBCR_ORGN0_WT		(2 << 10)
 #define TTBCR_ORGN0_WBNWA	(3 << 10)
 #define TTBCR_ORGN0_MASK	(3 << 10)
 #define TTBCR_SHARED_NON	(0 << 12)
 #define TTBCR_SHARED_OUTER	(2 << 12)
 #define TTBCR_SHARED_INNER	(3 << 12)
 #define TTBCR_EPD0		(0 << 7)

 /*
  * VMSAv8-32 Long-descriptor format memory region attributes
  * (ARM Architecture Reference Manual section G5.7.4 [DDI0487E.a])
  *
  * MAIR0[ 7: 0] 0x00 Device-nGnRnE (aka Strongly-Ordered)
  * MAIR0[15: 8] 0xaa Outer/Inner Write-Through, Read-Allocate No Write-Allocate
  * MAIR0[23:16] 0xee Outer/Inner Write-Back, Read-Allocate No Write-Allocate
  * MAIR0[31:24] 0xff Outer/Inner Write-Back, Read-Allocate Write-Allocate
  */
 #define MEMORY_ATTRIBUTES	((0x00 << (0 * 8)) | (0xaa << (1 * 8)) | \
 				 (0xee << (2 * 8)) | (0xff << (3 * 8)))

 /* options available for data cache on each page */
 enum dcache_option {
 	DCACHE_OFF = TTB_SECT | TTB_SECT_MAIR(0) | TTB_SECT_XN_MASK,
 	DCACHE_WRITETHROUGH = TTB_SECT | TTB_SECT_MAIR(1),
 	DCACHE_WRITEBACK = TTB_SECT | TTB_SECT_MAIR(2),
 	DCACHE_WRITEALLOC = TTB_SECT | TTB_SECT_MAIR(3),
 };
 #elif defined(CONFIG_CPU_V7A)
 /* Short-Descriptor Translation Table Level 1 Bits */
 #define TTB_SECT_NS_MASK	(1 << 19)
 #define TTB_SECT_NG_MASK	(1 << 17)
 #define TTB_SECT_S_MASK		(1 << 16)
 /* Note: TTB AP bits are set elsewhere */
 #define TTB_SECT_AP		(3 << 10)
 #define TTB_SECT_TEX(x)		((x & 0x7) << 12)
 #define TTB_SECT_DOMAIN(x)	((x & 0xf) << 5)
 #define TTB_SECT_XN_MASK	(1 << 4)
 #define TTB_SECT_C_MASK		(1 << 3)
 #define TTB_SECT_B_MASK		(1 << 2)
 #define TTB_SECT			(2 << 0)

 /*
  * Short-descriptor format memory region attributes, without TEX remap
  * (ARM Architecture Reference Manual section G5.7.2 [DDI0487E.a])
  *
  * TEX[0] C  B
  *   0    0  0   Device-nGnRnE (aka Strongly-Ordered)
  *   0    1  0   Outer/Inner Write-Through, Read-Allocate No Write-Allocate
  *   0    1  1   Outer/Inner Write-Back, Read-Allocate No Write-Allocate
  *   1    1  1   Outer/Inner Write-Back, Read-Allocate Write-Allocate
  */
 enum dcache_option {
 	DCACHE_OFF = TTB_SECT_DOMAIN(0) | TTB_SECT_XN_MASK | TTB_SECT,
 	DCACHE_WRITETHROUGH = TTB_SECT_DOMAIN(0) | TTB_SECT | TTB_SECT_C_MASK,
 	DCACHE_WRITEBACK = DCACHE_WRITETHROUGH | TTB_SECT_B_MASK,
 	DCACHE_WRITEALLOC = DCACHE_WRITEBACK | TTB_SECT_TEX(1),
 };
 #else
 #define TTB_SECT_AP		(3 << 10)
 /* options available for data cache on each page */
 enum dcache_option {
 	DCACHE_OFF = 0x12,
 	DCACHE_WRITETHROUGH = 0x1a,
 	DCACHE_WRITEBACK = 0x1e,
 	DCACHE_WRITEALLOC = 0x16,
 };
 #endif

 #if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
 #define DCACHE_DEFAULT_OPTION	DCACHE_WRITETHROUGH
 #elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
 #define DCACHE_DEFAULT_OPTION	DCACHE_WRITEALLOC
 #elif defined(CONFIG_SYS_ARM_CACHE_WRITEBACK)
 #define DCACHE_DEFAULT_OPTION	DCACHE_WRITEBACK
 #endif

 /* Size of an MMU section */
 enum {
 #ifdef CONFIG_ARMV7_LPAE
 	MMU_SECTION_SHIFT	= 21, /* 2MB */
 #else
 	MMU_SECTION_SHIFT	= 20, /* 1MB */
 #endif
 	MMU_SECTION_SIZE	= 1 << MMU_SECTION_SHIFT,
 };

 #ifdef CONFIG_CPU_V7A
 /* TTBR0 bits */
 #define TTBR0_BASE_ADDR_MASK	0xFFFFC000
 #define TTBR0_RGN_NC			(0 << 3)
 #define TTBR0_RGN_WBWA			(1 << 3)
 #define TTBR0_RGN_WT			(2 << 3)
 #define TTBR0_RGN_WB			(3 << 3)
 /* TTBR0[6] is IRGN[0] and TTBR[0] is IRGN[1] */
 #define TTBR0_IRGN_NC			(0 << 0 | 0 << 6)
 #define TTBR0_IRGN_WBWA			(0 << 0 | 1 << 6)
 #define TTBR0_IRGN_WT			(1 << 0 | 0 << 6)
 #define TTBR0_IRGN_WB			(1 << 0 | 1 << 6)
 #endif

 /**
  * mmu_page_table_flush() - register an update to page tables
  *
  * Register an update to the page tables, and flush the TLB
  *
  * @start:	start address of update in page table
  * @stop:	stop address of update in page table
  */
 void mmu_page_table_flush(unsigned long start, unsigned long stop);

 #ifdef CONFIG_ARMV7_PSCI
 void psci_arch_cpu_entry(void);
 void psci_arch_init(void);
 u32 psci_version(void);
 s32 psci_features(u32 function_id, u32 psci_fid);
 s32 psci_cpu_off(void);
 s32 psci_cpu_on(u32 function_id, u32 target_cpu, u32 pc,
 		u32 context_id);
 s32 psci_affinity_info(u32 function_id, u32 target_affinity,
 		       u32  lowest_affinity_level);
 u32 psci_migrate_info_type(void);
 void psci_system_off(void);
 void psci_system_reset(void);
 s32 psci_features(u32 function_id, u32 psci_fid);
 #endif

 #endif /* __ASSEMBLY__ */

 #define arch_align_stack(x) (x)

 #endif /* __KERNEL__ */

 #endif /* CONFIG_ARM64 */

 #ifndef __ASSEMBLY__
 /**
  * save_boot_params() - Save boot parameters before starting reset sequence
  *
  * If you provide this function it will be called immediately U-Boot starts,
  * both for SPL and U-Boot proper.
  *
  * All registers are unchanged from U-Boot entry. No registers need be
  * preserved.
  *
  * This is not a normal C function. There is no stack. Return by branching to
  * save_boot_params_ret.
  *
  * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3);
  */

 /**
  * save_boot_params_ret() - Return from save_boot_params()
  *
  * If you provide save_boot_params(), then you should jump back to this
  * function when done. Try to preserve all registers.
  *
  * If your implementation of save_boot_params() is in C then it is acceptable
  * to simply call save_boot_params_ret() at the end of your function. Since
  * there is no link register set up, you cannot just exit the function. U-Boot
  * will return to the (initialised) value of lr, and likely crash/hang.
  *
  * If your implementation of save_boot_params() is in assembler then you
  * should use 'b' or 'bx' to return to save_boot_params_ret.
  */
 void save_boot_params_ret(void);

 /**
  * mmu_set_region_dcache_behaviour_phys() - set virt/phys mapping
  *
  * Change the virt/phys mapping and cache settings for a region.
  *
  * @virt:	virtual start address of memory region to change
  * @phys:	physical address for the memory region to set
  * @size:	size of memory region to change
  * @option:	dcache option to select
  */
 void mmu_set_region_dcache_behaviour_phys(phys_addr_t virt, phys_addr_t phys,
 					size_t size, enum dcache_option option);

 /**
  * mmu_set_region_dcache_behaviour() - set cache settings
  *
  * Change the cache settings for a region.
  *
  * @start:	start address of memory region to change
  * @size:	size of memory region to change
  * @option:	dcache option to select
  */
 void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
 				     enum dcache_option option);

 #ifdef CONFIG_SYS_NONCACHED_MEMORY
 /**
  * noncached_init() - Initialize non-cached memory region
  *
  * Initialize non-cached memory area. This memory region will be typically
  * located right below the malloc() area and mapped uncached in the MMU.
  *
  * It is called during the generic post-relocation init sequence.
  *
  * Return: 0 if OK
  */
 int noncached_init(void);

 phys_addr_t noncached_alloc(size_t size, size_t align);
 #endif /* CONFIG_SYS_NONCACHED_MEMORY */

 #endif /* __ASSEMBLY__ */

 #endif
	#ifndef __ASM_ARM_SYSTEM_H
	#define __ASM_ARM_SYSTEM_H

	#include <linux/compiler.h>
	#include <asm/barriers.h>

	#ifdef CONFIG_ARM64

	/*
	* SCTLR_EL1/SCTLR_EL2/SCTLR_EL3 bits definitions
	*/
	#define CR_M (1 << 0) /* MMU enable */
	#define CR_A (1 << 1) /* Alignment abort enable */
	#define CR_C (1 << 2) /* Dcache enable */
	#define CR_SA (1 << 3) /* Stack Alignment Check Enable */
	#define CR_I (1 << 12) /* Icache enable */
	#define CR_WXN (1 << 19) /* Write Permision Imply XN */
	#define CR_EE (1 << 25) /* Exception (Big) Endian */

	#define ES_TO_AARCH64 1
	#define ES_TO_AARCH32 0

	/*
	* SCR_EL3 bits definitions
	*/
	#define SCR_EL3_RW_AARCH64 (1 << 10) /* Next lower level is AArch64 */
	#define SCR_EL3_RW_AARCH32 (0 << 10) /* Lower lowers level are AArch32 */
	#define SCR_EL3_HCE_EN (1 << 8) /* Hypervisor Call enable */
	#define SCR_EL3_SMD_DIS (1 << 7) /* Secure Monitor Call disable */
	#define SCR_EL3_RES1 (3 << 4) /* Reserved, RES1 */
	#define SCR_EL3_EA_EN (1 << 3) /* External aborts taken to EL3 */
	#define SCR_EL3_NS_EN (1 << 0) /* EL0 and EL1 in Non-scure state */

	/*
	* SPSR_EL3/SPSR_EL2 bits definitions
	*/
	#define SPSR_EL_END_LE (0 << 9) /* Exception Little-endian */
	#define SPSR_EL_DEBUG_MASK (1 << 9) /* Debug exception masked */
	#define SPSR_EL_ASYN_MASK (1 << 8) /* Asynchronous data abort masked */
	#define SPSR_EL_SERR_MASK (1 << 8) /* System Error exception masked */
	#define SPSR_EL_IRQ_MASK (1 << 7) /* IRQ exception masked */
	#define SPSR_EL_FIQ_MASK (1 << 6) /* FIQ exception masked */
	#define SPSR_EL_T_A32 (0 << 5) /* AArch32 instruction set A32 */
	#define SPSR_EL_M_AARCH64 (0 << 4) /* Exception taken from AArch64 */
	#define SPSR_EL_M_AARCH32 (1 << 4) /* Exception taken from AArch32 */
	#define SPSR_EL_M_SVC (0x3) /* Exception taken from SVC mode */
	#define SPSR_EL_M_HYP (0xa) /* Exception taken from HYP mode */
	#define SPSR_EL_M_EL1H (5) /* Exception taken from EL1h mode */
	#define SPSR_EL_M_EL2H (9) /* Exception taken from EL2h mode */

	/*
	* CPTR_EL2 bits definitions
	*/
	#define CPTR_EL2_RES1 (3 << 12 \| 0x3ff) /* Reserved, RES1 */

	/*
	* SCTLR_EL2 bits definitions
	*/
	#define SCTLR_EL2_RES1 (3 << 28 \| 3 << 22 \| 1 << 18 \| 1 << 16 \|\
	1 << 11 \| 3 << 4) /* Reserved, RES1 */
	#define SCTLR_EL2_EE_LE (0 << 25) /* Exception Little-endian */
	#define SCTLR_EL2_WXN_DIS (0 << 19) /* Write permission is not XN */
	#define SCTLR_EL2_ICACHE_DIS (0 << 12) /* Instruction cache disabled */
	#define SCTLR_EL2_SA_DIS (0 << 3) /* Stack Alignment Check disabled */
	#define SCTLR_EL2_DCACHE_DIS (0 << 2) /* Data cache disabled */
	#define SCTLR_EL2_ALIGN_DIS (0 << 1) /* Alignment check disabled */
	#define SCTLR_EL2_MMU_DIS (0) /* MMU disabled */

	/*
	* CNTHCTL_EL2 bits definitions
	*/
	#define CNTHCTL_EL2_EL1PCEN_EN (1 << 1) /* Physical timer regs accessible */
	#define CNTHCTL_EL2_EL1PCTEN_EN (1 << 0) /* Physical counter accessible */

	/*
	* HCR_EL2 bits definitions
	*/
	#define HCR_EL2_RW_AARCH64 (1 << 31) /* EL1 is AArch64 */
	#define HCR_EL2_RW_AARCH32 (0 << 31) /* Lower levels are AArch32 */
	#define HCR_EL2_HCD_DIS (1 << 29) /* Hypervisor Call disabled */

	/*
	* CPACR_EL1 bits definitions
	*/
	#define CPACR_EL1_FPEN_EN (3 << 20) /* SIMD and FP instruction enabled */

	/*
	* SCTLR_EL1 bits definitions
	*/
	#define SCTLR_EL1_RES1 (3 << 28 \| 3 << 22 \| 1 << 20 \|\
	1 << 11) /* Reserved, RES1 */
	#define SCTLR_EL1_UCI_DIS (0 << 26) /* Cache instruction disabled */
	#define SCTLR_EL1_EE_LE (0 << 25) /* Exception Little-endian */
	#define SCTLR_EL1_WXN_DIS (0 << 19) /* Write permission is not XN */
	#define SCTLR_EL1_NTWE_DIS (0 << 18) /* WFE instruction disabled */
	#define SCTLR_EL1_NTWI_DIS (0 << 16) /* WFI instruction disabled */
	#define SCTLR_EL1_UCT_DIS (0 << 15) /* CTR_EL0 access disabled */
	#define SCTLR_EL1_DZE_DIS (0 << 14) /* DC ZVA instruction disabled */
	#define SCTLR_EL1_ICACHE_DIS (0 << 12) /* Instruction cache disabled */
	#define SCTLR_EL1_UMA_DIS (0 << 9) /* User Mask Access disabled */
	#define SCTLR_EL1_SED_EN (0 << 8) /* SETEND instruction enabled */
	#define SCTLR_EL1_ITD_EN (0 << 7) /* IT instruction enabled */
	#define SCTLR_EL1_CP15BEN_DIS (0 << 5) /* CP15 barrier operation disabled */
	#define SCTLR_EL1_SA0_DIS (0 << 4) /* Stack Alignment EL0 disabled */
	#define SCTLR_EL1_SA_DIS (0 << 3) /* Stack Alignment EL1 disabled */
	#define SCTLR_EL1_DCACHE_DIS (0 << 2) /* Data cache disabled */
	#define SCTLR_EL1_ALIGN_DIS (0 << 1) /* Alignment check disabled */
	#define SCTLR_EL1_MMU_DIS (0) /* MMU disabled */

	#ifndef __ASSEMBLY__

	struct pt_regs;

	u64 get_page_table_size(void);
	#define PGTABLE_SIZE get_page_table_size()

	/* 2MB granularity */
	#define MMU_SECTION_SHIFT 21
	#define MMU_SECTION_SIZE (1 << MMU_SECTION_SHIFT)

	/* These constants need to be synced to the MT_ types in asm/armv8/mmu.h */
	enum dcache_option {
	DCACHE_OFF = 0 << 2,
	DCACHE_WRITETHROUGH = 3 << 2,
	DCACHE_WRITEBACK = 4 << 2,
	DCACHE_WRITEALLOC = 4 << 2,
	};

	#define wfi() \
	({asm volatile( \
	"wfi" : : : "memory"); \
	})

	static inline unsigned int current_el(void)
	{
	unsigned long el;

	asm volatile("mrs %0, CurrentEL" : "=r" (el) : : "cc");
	return 3 & (el >> 2);
	}

	static inline unsigned int get_sctlr(void)
	{
	unsigned int el;
	unsigned long val;

	el = current_el();
	if (el == 1)
	asm volatile("mrs %0, sctlr_el1" : "=r" (val) : : "cc");
	else if (el == 2)
	asm volatile("mrs %0, sctlr_el2" : "=r" (val) : : "cc");
	else
	asm volatile("mrs %0, sctlr_el3" : "=r" (val) : : "cc");

	return val;
	}

	static inline void set_sctlr(unsigned long val)
	{
	unsigned int el;

	el = current_el();
	if (el == 1)
	asm volatile("msr sctlr_el1, %0" : : "r" (val) : "cc");
	else if (el == 2)
	asm volatile("msr sctlr_el2, %0" : : "r" (val) : "cc");
	else
	asm volatile("msr sctlr_el3, %0" : : "r" (val) : "cc");

	asm volatile("isb");
	}

	static inline unsigned long read_mpidr(void)
	{
	unsigned long val;

	asm volatile("mrs %0, mpidr_el1" : "=r" (val));

	return val;
	}

	#define BSP_COREID 0

	void __asm_flush_dcache_all(void);
	void __asm_invalidate_dcache_all(void);
	void __asm_flush_dcache_range(u64 start, u64 end);

	/**
	* __asm_invalidate_dcache_range() - Invalidate a range of virtual addresses
	*
	* This performance an invalidate from @start to @end - 1. Both addresses
	* should be cache-aligned, otherwise this function will align the start
	* address and may continue past the end address.
	*
	* Data in the address range is evicted from the cache and is not written back
	* to memory.
	*
	* @start: Start address to invalidate
	* @end: End address to invalidate up to (exclusive)
	*/
	void __asm_invalidate_dcache_range(u64 start, u64 end);
	void __asm_invalidate_tlb_all(void);
	void __asm_invalidate_icache_all(void);
	int __asm_invalidate_l3_dcache(void);
	int __asm_flush_l3_dcache(void);
	int __asm_invalidate_l3_icache(void);
	void __asm_switch_ttbr(u64 new_ttbr);

	/*
	* armv8_switch_to_el2() - switch from EL3 to EL2 for ARMv8
	*
	* @args: For loading 64-bit OS, fdt address.
	* For loading 32-bit OS, zero.
	* @mach_nr: For loading 64-bit OS, zero.
	* For loading 32-bit OS, machine nr
	* @fdt_addr: For loading 64-bit OS, zero.
	* For loading 32-bit OS, fdt address.
	* @arg4: Input argument.
	* @entry_point: kernel entry point
	* @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
	*/
	void __noreturn armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr,
	u64 arg4, u64 entry_point, u64 es_flag);
	/*
	* armv8_switch_to_el1() - switch from EL2 to EL1 for ARMv8
	*
	* @args: For loading 64-bit OS, fdt address.
	* For loading 32-bit OS, zero.
	* @mach_nr: For loading 64-bit OS, zero.
	* For loading 32-bit OS, machine nr
	* @fdt_addr: For loading 64-bit OS, zero.
	* For loading 32-bit OS, fdt address.
	* @arg4: Input argument.
	* @entry_point: kernel entry point
	* @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32
	*/
	void armv8_switch_to_el1(u64 args, u64 mach_nr, u64 fdt_addr,
	u64 arg4, u64 entry_point, u64 es_flag);
	void armv8_el2_to_aarch32(u64 args, u64 mach_nr, u64 fdt_addr,
	u64 arg4, u64 entry_point);
	void gic_init(void);
	void gic_send_sgi(unsigned long sgino);
	void wait_for_wakeup(void);
	void protect_secure_region(void);
	void smp_kick_all_cpus(void);

	void flush_l3_cache(void);
	void mmu_change_region_attr(phys_addr_t start, size_t size, u64 attrs);

	/*
	* smc_call() - issue a secure monitor call
	*
	* Issue a secure monitor call in accordance with ARM "SMC Calling convention",
	* DEN0028A
	*
	* @args: input and output arguments
	*/
	void smc_call(struct pt_regs *args);

	void __noreturn psci_system_reset(void);
	void __noreturn psci_system_reset2(u32 reset_level, u32 cookie);
	void __noreturn psci_system_off(void);

	#ifdef CONFIG_ARMV8_PSCI
	extern char __secure_start[];
	extern char __secure_end[];
	extern char __secure_stack_start[];
	extern char __secure_stack_end[];

	void armv8_setup_psci(void);
	void psci_setup_vectors(void);
	void psci_arch_init(void);
	#endif

	#endif /* __ASSEMBLY__ */

	#else /* CONFIG_ARM64 */

	#ifdef __KERNEL__

	#define CPU_ARCH_UNKNOWN 0
	#define CPU_ARCH_ARMv3 1
	#define CPU_ARCH_ARMv4 2
	#define CPU_ARCH_ARMv4T 3
	#define CPU_ARCH_ARMv5 4
	#define CPU_ARCH_ARMv5T 5
	#define CPU_ARCH_ARMv5TE 6
	#define CPU_ARCH_ARMv5TEJ 7
	#define CPU_ARCH_ARMv6 8
	#define CPU_ARCH_ARMv7 9

	/*
	* CR1 bits (CP#15 CR1)
	*/
	#define CR_M (1 << 0) /* MMU enable */
	#define CR_A (1 << 1) /* Alignment abort enable */
	#define CR_C (1 << 2) /* Dcache enable */
	#define CR_W (1 << 3) /* Write buffer enable */
	#define CR_P (1 << 4) /* 32-bit exception handler */
	#define CR_D (1 << 5) /* 32-bit data address range */
	#define CR_L (1 << 6) /* Implementation defined */
	#define CR_B (1 << 7) /* Big endian */
	#define CR_S (1 << 8) /* System MMU protection */
	#define CR_R (1 << 9) /* ROM MMU protection */
	#define CR_F (1 << 10) /* Implementation defined */
	#define CR_Z (1 << 11) /* Implementation defined */
	#define CR_I (1 << 12) /* Icache enable */
	#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */
	#define CR_RR (1 << 14) /* Round Robin cache replacement */
	#define CR_L4 (1 << 15) /* LDR pc can set T bit */
	#define CR_DT (1 << 16)
	#define CR_IT (1 << 18)
	#define CR_ST (1 << 19)
	#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */
	#define CR_U (1 << 22) /* Unaligned access operation */
	#define CR_XP (1 << 23) /* Extended page tables */
	#define CR_VE (1 << 24) /* Vectored interrupts */
	#define CR_EE (1 << 25) /* Exception (Big) Endian */
	#define CR_TRE (1 << 28) /* TEX remap enable */
	#define CR_AFE (1 << 29) /* Access flag enable */
	#define CR_TE (1 << 30) /* Thumb exception enable */

	#if defined(CONFIG_ARMV7_LPAE) && !defined(PGTABLE_SIZE)
	#define PGTABLE_SIZE (4096 * 5)
	#elif !defined(PGTABLE_SIZE)
	#define PGTABLE_SIZE (4096 * 4)
	#endif

	/*
	* This is used to ensure the compiler did actually allocate the register we
	* asked it for some inline assembly sequences. Apparently we can't trust
	* the compiler from one version to another so a bit of paranoia won't hurt.
	* This string is meant to be concatenated with the inline asm string and
	* will cause compilation to stop on mismatch.
	* (for details, see gcc PR 15089)
	*/
	#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"

	#ifndef __ASSEMBLY__

	#ifdef CONFIG_ARMV7_LPAE
	void switch_to_hypervisor_ret(void);
	#endif

	#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");

	#ifdef __ARM_ARCH_7A__
	#define wfi() __asm__ __volatile__ ("wfi" : : : "memory")
	#else
	#define wfi()
	#endif

	static inline unsigned long get_cpsr(void)
	{
	unsigned long cpsr;

	asm volatile("mrs %0, cpsr" : "=r"(cpsr): );
	return cpsr;
	}

	static inline int is_hyp(void)
	{
	#ifdef CONFIG_ARMV7_LPAE
	/* HYP mode requires LPAE ... */
	return ((get_cpsr() & 0x1f) == 0x1a);
	#else
	/* ... so without LPAE support we can optimize all hyp code away */
	return 0;
	#endif
	}

	static inline unsigned int get_cr(void)
	{
	unsigned int val;

	if (is_hyp())
	asm volatile("mrc p15, 4, %0, c1, c0, 0 @ get CR" : "=r" (val)
	:
	: "cc");
	else
	asm volatile("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val)
	:
	: "cc");
	return val;
	}

	static inline void set_cr(unsigned int val)
	{
	if (is_hyp())
	asm volatile("mcr p15, 4, %0, c1, c0, 0 @ set CR" :
	: "r" (val)
	: "cc");
	else
	asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR" :
	: "r" (val)
	: "cc");
	isb();
	}

	static inline unsigned int get_dacr(void)
	{
	unsigned int val;
	asm("mrc p15, 0, %0, c3, c0, 0 @ get DACR" : "=r" (val) : : "cc");
	return val;
	}

	static inline void set_dacr(unsigned int val)
	{
	asm volatile("mcr p15, 0, %0, c3, c0, 0 @ set DACR"
	: : "r" (val) : "cc");
	isb();
	}

	#ifdef CONFIG_ARMV7_LPAE
	/* Long-Descriptor Translation Table Level 1/2 Bits */
	#define TTB_SECT_XN_MASK (1ULL << 54)
	#define TTB_SECT_NG_MASK (1 << 11)
	#define TTB_SECT_AF (1 << 10)
	#define TTB_SECT_SH_MASK (3 << 8)
	#define TTB_SECT_NS_MASK (1 << 5)
	#define TTB_SECT_AP (1 << 6)
	/* Note: TTB AP bits are set elsewhere */
	#define TTB_SECT_MAIR(x) ((x & 0x7) << 2) /* Index into MAIR */
	#define TTB_SECT (1 << 0)
	#define TTB_PAGETABLE (3 << 0)

	/* TTBCR flags */
	#define TTBCR_EAE (1 << 31)
	#define TTBCR_T0SZ(x) ((x) << 0)
	#define TTBCR_T1SZ(x) ((x) << 16)
	#define TTBCR_USING_TTBR0 (TTBCR_T0SZ(0) \| TTBCR_T1SZ(0))
	#define TTBCR_IRGN0_NC (0 << 8)
	#define TTBCR_IRGN0_WBWA (1 << 8)
	#define TTBCR_IRGN0_WT (2 << 8)
	#define TTBCR_IRGN0_WBNWA (3 << 8)
	#define TTBCR_IRGN0_MASK (3 << 8)
	#define TTBCR_ORGN0_NC (0 << 10)
	#define TTBCR_ORGN0_WBWA (1 << 10)
	#define TTBCR_ORGN0_WT (2 << 10)
	#define TTBCR_ORGN0_WBNWA (3 << 10)
	#define TTBCR_ORGN0_MASK (3 << 10)
	#define TTBCR_SHARED_NON (0 << 12)
	#define TTBCR_SHARED_OUTER (2 << 12)
	#define TTBCR_SHARED_INNER (3 << 12)
	#define TTBCR_EPD0 (0 << 7)

	/*
	* VMSAv8-32 Long-descriptor format memory region attributes
	* (ARM Architecture Reference Manual section G5.7.4 [DDI0487E.a])
	*
	* MAIR0[ 7: 0] 0x00 Device-nGnRnE (aka Strongly-Ordered)
	* MAIR0[15: 8] 0xaa Outer/Inner Write-Through, Read-Allocate No Write-Allocate
	* MAIR0[23:16] 0xee Outer/Inner Write-Back, Read-Allocate No Write-Allocate
	* MAIR0[31:24] 0xff Outer/Inner Write-Back, Read-Allocate Write-Allocate
	*/
	#define MEMORY_ATTRIBUTES ((0x00 << (0 * 8)) \| (0xaa << (1 * 8)) \| \
	(0xee << (2 * 8)) \| (0xff << (3 * 8)))

	/* options available for data cache on each page */
	enum dcache_option {
	DCACHE_OFF = TTB_SECT \| TTB_SECT_MAIR(0) \| TTB_SECT_XN_MASK,
	DCACHE_WRITETHROUGH = TTB_SECT \| TTB_SECT_MAIR(1),
	DCACHE_WRITEBACK = TTB_SECT \| TTB_SECT_MAIR(2),
	DCACHE_WRITEALLOC = TTB_SECT \| TTB_SECT_MAIR(3),
	};
	#elif defined(CONFIG_CPU_V7A)
	/* Short-Descriptor Translation Table Level 1 Bits */
	#define TTB_SECT_NS_MASK (1 << 19)
	#define TTB_SECT_NG_MASK (1 << 17)
	#define TTB_SECT_S_MASK (1 << 16)
	/* Note: TTB AP bits are set elsewhere */
	#define TTB_SECT_AP (3 << 10)
	#define TTB_SECT_TEX(x) ((x & 0x7) << 12)
	#define TTB_SECT_DOMAIN(x) ((x & 0xf) << 5)
	#define TTB_SECT_XN_MASK (1 << 4)
	#define TTB_SECT_C_MASK (1 << 3)
	#define TTB_SECT_B_MASK (1 << 2)
	#define TTB_SECT (2 << 0)

	/*
	* Short-descriptor format memory region attributes, without TEX remap
	* (ARM Architecture Reference Manual section G5.7.2 [DDI0487E.a])
	*
	* TEX[0] C B
	* 0 0 0 Device-nGnRnE (aka Strongly-Ordered)
	* 0 1 0 Outer/Inner Write-Through, Read-Allocate No Write-Allocate
	* 0 1 1 Outer/Inner Write-Back, Read-Allocate No Write-Allocate
	* 1 1 1 Outer/Inner Write-Back, Read-Allocate Write-Allocate
	*/
	enum dcache_option {
	DCACHE_OFF = TTB_SECT_DOMAIN(0) \| TTB_SECT_XN_MASK \| TTB_SECT,
	DCACHE_WRITETHROUGH = TTB_SECT_DOMAIN(0) \| TTB_SECT \| TTB_SECT_C_MASK,
	DCACHE_WRITEBACK = DCACHE_WRITETHROUGH \| TTB_SECT_B_MASK,
	DCACHE_WRITEALLOC = DCACHE_WRITEBACK \| TTB_SECT_TEX(1),
	};
	#else
	#define TTB_SECT_AP (3 << 10)
	/* options available for data cache on each page */
	enum dcache_option {
	DCACHE_OFF = 0x12,
	DCACHE_WRITETHROUGH = 0x1a,
	DCACHE_WRITEBACK = 0x1e,
	DCACHE_WRITEALLOC = 0x16,
	};
	#endif

	#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
	#define DCACHE_DEFAULT_OPTION DCACHE_WRITETHROUGH
	#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
	#define DCACHE_DEFAULT_OPTION DCACHE_WRITEALLOC
	#elif defined(CONFIG_SYS_ARM_CACHE_WRITEBACK)
	#define DCACHE_DEFAULT_OPTION DCACHE_WRITEBACK
	#endif

	/* Size of an MMU section */
	enum {
	#ifdef CONFIG_ARMV7_LPAE
	MMU_SECTION_SHIFT = 21, /* 2MB */
	#else
	MMU_SECTION_SHIFT = 20, /* 1MB */
	#endif
	MMU_SECTION_SIZE = 1 << MMU_SECTION_SHIFT,
	};

	#ifdef CONFIG_CPU_V7A
	/* TTBR0 bits */
	#define TTBR0_BASE_ADDR_MASK 0xFFFFC000
	#define TTBR0_RGN_NC (0 << 3)
	#define TTBR0_RGN_WBWA (1 << 3)
	#define TTBR0_RGN_WT (2 << 3)
	#define TTBR0_RGN_WB (3 << 3)
	/* TTBR0[6] is IRGN[0] and TTBR[0] is IRGN[1] */
	#define TTBR0_IRGN_NC (0 << 0 \| 0 << 6)
	#define TTBR0_IRGN_WBWA (0 << 0 \| 1 << 6)
	#define TTBR0_IRGN_WT (1 << 0 \| 0 << 6)
	#define TTBR0_IRGN_WB (1 << 0 \| 1 << 6)
	#endif

	/**
	* mmu_page_table_flush() - register an update to page tables
	*
	* Register an update to the page tables, and flush the TLB
	*
	* @start: start address of update in page table
	* @stop: stop address of update in page table
	*/
	void mmu_page_table_flush(unsigned long start, unsigned long stop);

	#ifdef CONFIG_ARMV7_PSCI
	void psci_arch_cpu_entry(void);
	void psci_arch_init(void);
	u32 psci_version(void);
	s32 psci_features(u32 function_id, u32 psci_fid);
	s32 psci_cpu_off(void);
	s32 psci_cpu_on(u32 function_id, u32 target_cpu, u32 pc,
	u32 context_id);
	s32 psci_affinity_info(u32 function_id, u32 target_affinity,
	u32 lowest_affinity_level);
	u32 psci_migrate_info_type(void);
	void psci_system_off(void);
	void psci_system_reset(void);
	s32 psci_features(u32 function_id, u32 psci_fid);
	#endif

	#endif /* __ASSEMBLY__ */

	#define arch_align_stack(x) (x)

	#endif /* __KERNEL__ */

	#endif /* CONFIG_ARM64 */

	#ifndef __ASSEMBLY__
	/**
	* save_boot_params() - Save boot parameters before starting reset sequence
	*
	* If you provide this function it will be called immediately U-Boot starts,
	* both for SPL and U-Boot proper.
	*
	* All registers are unchanged from U-Boot entry. No registers need be
	* preserved.
	*
	* This is not a normal C function. There is no stack. Return by branching to
	* save_boot_params_ret.
	*
	* void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3);
	*/

	/**
	* save_boot_params_ret() - Return from save_boot_params()
	*
	* If you provide save_boot_params(), then you should jump back to this
	* function when done. Try to preserve all registers.
	*
	* If your implementation of save_boot_params() is in C then it is acceptable
	* to simply call save_boot_params_ret() at the end of your function. Since
	* there is no link register set up, you cannot just exit the function. U-Boot
	* will return to the (initialised) value of lr, and likely crash/hang.
	*
	* If your implementation of save_boot_params() is in assembler then you
	* should use 'b' or 'bx' to return to save_boot_params_ret.
	*/
	void save_boot_params_ret(void);

	/**
	* mmu_set_region_dcache_behaviour_phys() - set virt/phys mapping
	*
	* Change the virt/phys mapping and cache settings for a region.
	*
	* @virt: virtual start address of memory region to change
	* @phys: physical address for the memory region to set
	* @size: size of memory region to change
	* @option: dcache option to select
	*/
	void mmu_set_region_dcache_behaviour_phys(phys_addr_t virt, phys_addr_t phys,
	size_t size, enum dcache_option option);

	/**
	* mmu_set_region_dcache_behaviour() - set cache settings
	*
	* Change the cache settings for a region.
	*
	* @start: start address of memory region to change
	* @size: size of memory region to change
	* @option: dcache option to select
	*/
	void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
	enum dcache_option option);

	#ifdef CONFIG_SYS_NONCACHED_MEMORY
	/**
	* noncached_init() - Initialize non-cached memory region
	*
	* Initialize non-cached memory area. This memory region will be typically
	* located right below the malloc() area and mapped uncached in the MMU.
	*
	* It is called during the generic post-relocation init sequence.
	*
	* Return: 0 if OK
	*/
	int noncached_init(void);

	phys_addr_t noncached_alloc(size_t size, size_t align);
	#endif /* CONFIG_SYS_NONCACHED_MEMORY */

	#endif /* __ASSEMBLY__ */

	#endif