omap3: Introduce weak misc_init_r
Introduce a __weak misc_init_r function that just runs dieid_num_r().
Remove misc_init_r from cm_t35, mcx, omap3_logic and mt_ventoux as this was
all they did for misc_init_r.
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Ilya Yanok <yanok@emcraft.com>
Cc: Peter Barada <peter.barada@logicpd.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 1fee574..f2e52e9 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -41,6 +41,7 @@
#include <asm/arch/gpio.h>
#include <asm/omap_common.h>
#include <i2c.h>
+#include <linux/compiler.h>
/* Declarations */
extern omap3_sysinfo sysinfo;
@@ -244,6 +245,17 @@
mem_init();
}
+/*
+ * Routine: misc_init_r
+ * Description: A basic misc_init_r that just displays the die ID
+ */
+int __weak misc_init_r(void)
+{
+ dieid_num_r();
+
+ return 0;
+}
+
/******************************************************************************
* Routine: wait_for_command_complete
* Description: Wait for posting to finish on watchdog
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
index d81b555..4c77790 100644
--- a/board/cm_t35/cm_t35.c
+++ b/board/cm_t35/cm_t35.c
@@ -100,17 +100,6 @@
}
/*
- * Routine: misc_init_r
- * Description: display die ID
- */
-int misc_init_r(void)
-{
- dieid_num_r();
-
- return 0;
-}
-
-/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 8f0b527..8f75af1 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -69,17 +69,6 @@
}
/*
- * Routine: misc_init_r
- * Description: late init.
- */
-int misc_init_r(void)
-{
- dieid_num_r();
-
- return 0;
-}
-
-/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 89b114b..12bcfcb 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -144,17 +144,6 @@
}
#endif
-/*
- * Routine: misc_init_r
- * Description: display die ID register
- */
-int misc_init_r(void)
-{
- dieid_num_r();
-
- return 0;
-}
-
#ifdef CONFIG_SMC911X
/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
static const u32 gpmc_lan92xx_config[] = {
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index c7aedc9..9fbaedd 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -196,13 +196,6 @@
return 0;
}
-int misc_init_r(void)
-{
- dieid_num_r();
-
- return 0;
-}
-
/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the