ARM: OMAP4+: Cleanup emif specific files
Removing the duplicated code in ddr3 initialization.
Also creating structure for lpddr2 mode registers to
avoid unnessecary revision checks.
These change reduces code addition for future Socs.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index bb37cf3..0683b9f 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -123,11 +123,13 @@
static void do_lpddr2_init(u32 base, u32 cs)
{
u32 mr_addr;
+ const struct lpddr2_mr_regs *mr_regs;
+ get_lpddr2_mr_regs(&mr_regs);
/* Wait till device auto initialization is complete */
while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
;
- set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT);
+ set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10);
/*
* tZQINIT = 1 us
* Enough loops assuming a maximum of 2GHz
@@ -135,22 +137,18 @@
sdelay(2000);
- if (omap_revision() >= OMAP5430_ES1_0)
- set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8);
- else
- set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3);
-
- set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY);
+ set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1);
+ set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16);
/*
* Enable refresh along with writing MR2
* Encoding of RL in MR2 is (RL - 2)
*/
mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
- set_mr(base, cs, mr_addr, RL_FINAL - 2);
+ set_mr(base, cs, mr_addr, mr_regs->mr2);
- if (omap_revision() >= OMAP5430_ES1_0)
- set_mr(base, cs, LPDDR2_MR3, 0x1);
+ if (mr_regs->mr3 > 0)
+ set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3);
}
static void lpddr2_init(u32 base, const struct emif_regs *regs)
@@ -268,9 +266,6 @@
static void ddr3_init(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- u32 *ext_phy_ctrl_base = 0;
- u32 *emif_ext_phy_ctrl_base = 0;
- u32 i = 0;
/*
* Set SDRAM_CONFIG and PHY control registers to locked frequency
@@ -290,27 +285,7 @@
writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
- ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
- emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1);
-
- /* Configure external phy control timing registers */
- for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
- writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
- /* Update shadow registers */
- writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
- }
-
- /*
- * external phy 6-24 registers do not change with
- * ddr frequency
- */
- for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
- writel(ddr3_ext_phy_ctrl_const_base[i],
- emif_ext_phy_ctrl_base++);
- /* Update shadow registers */
- writel(ddr3_ext_phy_ctrl_const_base[i],
- emif_ext_phy_ctrl_base++);
- }
+ do_ext_phy_settings(base, regs);
/* enable leveling */
writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
@@ -1109,9 +1084,6 @@
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
u32 omap_rev = omap_revision();
- if (omap_rev == OMAP5430_ES1_0)
- return;
-
/* reset phy on ES2.0 */
if (omap_rev == OMAP4430_ES2_0)
emif_reset_phy(base);