diff --git a/doc/board/kontron/pitx-imx8m.rst b/doc/board/kontron/pitx-imx8m.rst
new file mode 100644
index 0000000..1f64cbd
--- /dev/null
+++ b/doc/board/kontron/pitx-imx8m.rst
@@ -0,0 +1,67 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Kontron pitx-imx8m
+==================
+
+The Kontron pitx-imx8m is an embedded board with an i.MX8MQ in the pITX
+form factor.
+
+The board has two Ethernet ports, USB, HDMI/LVDS, m.2 slot, SD card, CAN,
+RS232 and much more.
+
+Quick Start
+-----------
+
+- Get and build the ARM Trusted firmware binary
+- Get DDR and HDMI firmware
+- Build U-Boot
+- Install on SD card
+- Boot
+
+Get and build the ARM Trusted firmware binary
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Note: builddir is U-Boot build directory (source directory for in-tree builds)
+
+.. code-block:: bash
+
+    $ git clone https://github.com/ARM-software/arm-trusted-firmware.git
+    $ git checkout v2.5
+    $ make PLAT=imx8mq ARCH=aarch64 CROSS_COMPILE=aarch64-linux-gnu- bl31
+    $ cp build/imx8mq/release/bl31.bin $(builddir)
+
+Get DDR and HDMI firmware
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Note: builddir is U-Boot build directory (source directory for in-tree builds)
+
+.. code-block:: bash
+
+    $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.11.bin
+    $ chmod +x firmware-imx-8.11.bin
+    $ ./firmware-imx-8.11
+    $ cp firmware-imx-8.11/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
+    $ cp firmware-imx-8.11/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
+
+Build U-Boot
+^^^^^^^^^^^^
+
+.. code-block:: bash
+
+    $ make kontron_pitx_imx8m_defconfig
+    $ make CROSS_COMPILE=aarch64-linux-gnu-
+
+Install on SD card
+^^^^^^^^^^^^^^^^^^
+
+
+Burn the flash.bin to SD card at an offset of 33 KiB:
+
+.. code-block:: bash
+
+    $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
+
+Boot
+^^^^
+
+Set the boot source selection to SD card boot and power on the board.