ARM: UniPhier: call pin_init() also in the normal boot
CONFIG_UNIPHIER_SERIAL has been moved to Kconfig and
it is defined in ./.config but not in spl/.config,
so pin_init() should be called from the normal image
so that UART works correctly.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig
index 011c6d9..36b7f11 100644
--- a/arch/arm/cpu/armv7/uniphier/Kconfig
+++ b/arch/arm/cpu/armv7/uniphier/Kconfig
@@ -32,6 +32,10 @@
The boot mode pins are latched when the system reset is deasserted
and determine which device the system should load a boot image from.
+config SOC_INIT
+ bool
+ default SPL_BUILD
+
config DRAM_INIT
bool
default SPL_BUILD
diff --git a/arch/arm/cpu/armv7/uniphier/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/board_postclk_init.c
index 3db336f..89e44bb 100644
--- a/arch/arm/cpu/armv7/uniphier/board_postclk_init.c
+++ b/arch/arm/cpu/armv7/uniphier/board_postclk_init.c
@@ -20,6 +20,7 @@
int board_postclk_init(void)
{
+#ifdef CONFIG_SOC_INIT
bcu_init();
sbc_init();
@@ -37,7 +38,7 @@
clkrst_init();
led_write(B, 2, , );
-
+#endif
pin_init();
led_write(B, 3, , );
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
index 4f42aec..fba1cc7 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
obj-y += platdevice.o
obj-y += boot-mode.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += bcu_init.o sbc_init.o sg_init.o \
- pll_init.o clkrst_init.o pinctrl.o
+obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
+ clkrst_init.o
+obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
index 527fd36..74129bc 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
@@ -5,6 +5,6 @@
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
obj-y += platdevice.o
obj-y += boot-mode.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += sbc_init.o sg_init.o \
- pll_init.o clkrst_init.o pinctrl.o
+obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o
+obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
index 4f42aec..fba1cc7 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
obj-y += platdevice.o
obj-y += boot-mode.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += bcu_init.o sbc_init.o sg_init.o \
- pll_init.o clkrst_init.o pinctrl.o
+obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
+ clkrst_init.o
+obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o