Merge branch 'master' of git://git.denx.de/u-boot-mmc
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 69fff32..52e0f4a 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -66,7 +66,18 @@
u32 spl_boot_mode(void)
{
- return gd->arch.omap_boot_params.omap_bootmode;
+ u32 val = gd->arch.omap_boot_params.omap_bootmode;
+
+ if (val == MMCSD_MODE_RAW)
+ return MMCSD_MODE_RAW;
+ else if (val == MMCSD_MODE_FAT)
+ return MMCSD_MODE_FAT;
+ else
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ return MMCSD_MODE_EMMCBOOT;
+#else
+ return MMCSD_MODE_UNDEFINED;
+#endif
}
void spl_board_init(void)
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
index 09d739d..a7ca12c 100644
--- a/arch/arm/include/asm/arch-exynos/dwmmc.h
+++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
@@ -23,6 +23,10 @@
#define MPSCTRL_ENCRYPTION (0x1<<1)
#define MPSCTRL_VALID (0x1<<0)
+/* CLKSEL Register */
+#define DWMCI_DIVRATIO_BIT 24
+#define DWMCI_DIVRATIO_MASK 0x7
+
#ifdef CONFIG_OF_CONTROL
int exynos_dwmmc_init(const void *blob);
#endif
diff --git a/board/ti/dra7xx/README b/board/ti/dra7xx/README
new file mode 100644
index 0000000..2fdaeac
--- /dev/null
+++ b/board/ti/dra7xx/README
@@ -0,0 +1,25 @@
+Summary
+=======
+
+This document covers various features of the 'dra7xx_evm' build and some
+related uses.
+
+eMMC boot partition use
+=======================
+
+It is possible, depending on SYSBOOT configuration to boot from the eMMC
+boot partitions using (name depending on documentation referenced)
+Alternative Boot operation mode or Boot Sequence Option 1/2. In this
+example we load MLO and u-boot.img from the build into DDR and then use
+'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to
+set boot0 as the boot device.
+U-Boot # setenv autoload no
+U-Boot # usb start
+U-Boot # dhcp
+U-Boot # mmc dev 1 1
+U-Boot # tftp ${loadaddr} dra7xx/MLO
+U-Boot # mmc write ${loadaddr} 0 100
+U-Boot # tftp ${loadaddr} dra7xx/u-boot.img
+U-Boot # mmc write ${loadaddr} 300 400
+U-Boot # mmc bootbus 1 2 0 2
+U-Boot # mmc partconf 1 1 1 0
diff --git a/board/ti/omap5_uevm/README b/board/ti/omap5_uevm/README
new file mode 100644
index 0000000..970e2ec
--- /dev/null
+++ b/board/ti/omap5_uevm/README
@@ -0,0 +1,25 @@
+Summary
+=======
+
+This document covers various features of the 'omap5_uevm' build and some
+related uses.
+
+eMMC boot partition use
+=======================
+
+It is possible, depending on SYSBOOT configuration to boot from the eMMC
+boot partitions using (name depending on documentation referenced)
+Alternative Boot operation mode or Boot Sequence Option 1/2. In this
+example we load MLO and u-boot.img from the build into DDR and then use
+'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to
+set boot0 as the boot device.
+U-Boot # setenv autoload no
+U-Boot # usb start
+U-Boot # dhcp
+U-Boot # mmc dev 1 1
+U-Boot # tftp ${loadaddr} omap5uevm/MLO
+U-Boot # mmc write ${loadaddr} 0 100
+U-Boot # tftp ${loadaddr} omap5uevm/u-boot.img
+U-Boot # mmc write ${loadaddr} 300 400
+U-Boot # mmc bootbus 1 2 0 2
+U-Boot # mmc partconf 1 1 1 0
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index da5fef9..2d51927 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -131,36 +131,6 @@
"- display info of the current MMC device"
);
-#ifdef CONFIG_SUPPORT_EMMC_BOOT
-static int boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
-{
- int err;
- err = mmc_boot_part_access(mmc, ack, part_num, access);
-
- if ((err == 0) && (access != 0)) {
- printf("\t\t\t!!!Notice!!!\n");
-
- printf("!You must close EMMC boot Partition");
- printf("after all images are written\n");
-
- printf("!EMMC boot partition has continuity");
- printf("at image writing time.\n");
-
- printf("!So, do not close the boot partition");
- printf("before all images are written.\n");
- return 0;
- } else if ((err == 0) && (access == 0))
- return 0;
- else if ((err != 0) && (access != 0)) {
- printf("EMMC boot partition-%d OPEN Failed.\n", part_num);
- return 1;
- } else {
- printf("EMMC boot partition-%d CLOSE Failed.\n", part_num);
- return 1;
- }
-}
-#endif
-
static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
enum mmc_state state;
@@ -195,7 +165,7 @@
return 1;
else
return 0;
- } else if (strncmp(argv[1], "part", 4) == 0) {
+ } else if (strcmp(argv[1], "part") == 0) {
block_dev_desc_t *mmc_dev;
struct mmc *mmc;
@@ -273,15 +243,16 @@
return 0;
#ifdef CONFIG_SUPPORT_EMMC_BOOT
- } else if ((strcmp(argv[1], "open") == 0) ||
- (strcmp(argv[1], "close") == 0)) {
+ } else if (strcmp(argv[1], "partconf") == 0) {
int dev;
struct mmc *mmc;
- u8 part_num, access = 0;
+ u8 ack, part_num, access;
- if (argc == 4) {
+ if (argc == 6) {
dev = simple_strtoul(argv[2], NULL, 10);
- part_num = simple_strtoul(argv[3], NULL, 10);
+ ack = simple_strtoul(argv[3], NULL, 10);
+ part_num = simple_strtoul(argv[4], NULL, 10);
+ access = simple_strtoul(argv[5], NULL, 10);
} else {
return CMD_RET_USAGE;
}
@@ -293,32 +264,53 @@
}
if (IS_SD(mmc)) {
- printf("SD device cannot be opened/closed\n");
+ puts("PARTITION_CONFIG only exists on eMMC\n");
return 1;
}
- if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) {
- printf("Invalid boot partition number:\n");
- printf("Boot partition number cannot be <= 0\n");
- printf("EMMC44 supports only 2 boot partitions\n");
+ /* acknowledge to be sent during boot operation */
+ return mmc_set_part_conf(mmc, ack, part_num, access);
+ } else if (strcmp(argv[1], "bootbus") == 0) {
+ int dev;
+ struct mmc *mmc;
+ u8 width, reset, mode;
+
+ if (argc == 6) {
+ dev = simple_strtoul(argv[2], NULL, 10);
+ width = simple_strtoul(argv[3], NULL, 10);
+ reset = simple_strtoul(argv[4], NULL, 10);
+ mode = simple_strtoul(argv[5], NULL, 10);
+ } else {
+ return CMD_RET_USAGE;
+ }
+
+ mmc = find_mmc_device(dev);
+ if (!mmc) {
+ printf("no mmc device at slot %x\n", dev);
return 1;
}
- if (strcmp(argv[1], "open") == 0)
- access = part_num; /* enable R/W access to boot part*/
- else
- access = 0; /* No access to boot partition */
+ if (IS_SD(mmc)) {
+ puts("BOOT_BUS_WIDTH only exists on eMMC\n");
+ return 1;
+ }
/* acknowledge to be sent during boot operation */
- return boot_part_access(mmc, 1, part_num, access);
-
- } else if (strcmp(argv[1], "bootpart") == 0) {
+ return mmc_set_boot_bus_width(mmc, width, reset, mode);
+ } else if (strcmp(argv[1], "bootpart-resize") == 0) {
int dev;
- dev = simple_strtoul(argv[2], NULL, 10);
+ struct mmc *mmc;
+ u32 bootsize, rpmbsize;
- u32 bootsize = simple_strtoul(argv[3], NULL, 10);
- u32 rpmbsize = simple_strtoul(argv[4], NULL, 10);
- struct mmc *mmc = find_mmc_device(dev);
+ if (argc == 5) {
+ dev = simple_strtoul(argv[2], NULL, 10);
+ bootsize = simple_strtoul(argv[3], NULL, 10);
+ rpmbsize = simple_strtoul(argv[4], NULL, 10);
+ } else {
+ return CMD_RET_USAGE;
+ }
+
+ mmc = find_mmc_device(dev);
if (!mmc) {
printf("no mmc device at slot %x\n", dev);
return 1;
@@ -438,12 +430,12 @@
"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
"mmc list - lists available devices\n"
#ifdef CONFIG_SUPPORT_EMMC_BOOT
- "mmc open <dev> <boot_partition>\n"
- " - Enable boot_part for booting and enable R/W access of boot_part\n"
- "mmc close <dev> <boot_partition>\n"
- " - Enable boot_part for booting and disable access to boot_part\n"
- "mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n"
- " - change sizes of boot and RPMB partitions of specified device\n"
+ "mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n"
+ " - Set the BOOT_BUS_WIDTH field of the specified device\n"
+ "mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n"
+ " - Change sizes of boot and RPMB partitions of specified device\n"
+ "mmc partconf dev boot_ack boot_partition partition_access\n"
+ " - Change the bits of the PARTITION_CONFIG field of the specified device\n"
#endif
"mmc setdsr - set DSR register value\n"
);
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 13fbff0..fa6f891 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -111,6 +111,30 @@
CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION,
CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
#endif
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ } else if (boot_mode == MMCSD_MODE_EMMCBOOT) {
+ /*
+ * We need to check what the partition is configured to.
+ * 1 and 2 match up to boot0 / boot1 and 7 is user data
+ * which is the first physical partition (0).
+ */
+ int part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
+
+ if (part == 7)
+ part = 0;
+
+ if (mmc_switch_part(0, part)) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+ puts("MMC partition switch failed\n");
+#endif
+ hang();
+ }
+#ifdef CONFIG_SPL_OS_BOOT
+ if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
+#endif
+ err = mmc_load_image_raw(mmc,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+#endif
} else {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
puts("spl: wrong MMC boot mode\n");
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 4cec5aa..d45c15c 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -237,7 +237,7 @@
* host->bus_hz should be set from user.
*/
if (host->get_mmc_clk)
- sclk = host->get_mmc_clk(host->dev_index);
+ sclk = host->get_mmc_clk(host);
else if (host->bus_hz)
sclk = host->bus_hz;
else {
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index b3e5c5e..de8cdcc 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -29,9 +29,22 @@
dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
}
-unsigned int exynos_dwmci_get_clk(int dev_index)
+unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
{
- return get_mmc_clk(dev_index);
+ unsigned long sclk;
+ int8_t clk_div;
+
+ /*
+ * Since SDCLKIN is divided inside controller by the DIVRATIO
+ * value set in the CLKSEL register, we need to use the same output
+ * clock value to calculate the CLKDIV value.
+ * as per user manual:cclk_in = SDCLKIN / (DIVRATIO + 1)
+ */
+ clk_div = ((dwmci_readl(host, DWMCI_CLKSEL) >> DWMCI_DIVRATIO_BIT)
+ & DWMCI_DIVRATIO_MASK) + 1;
+ sclk = get_mmc_clk(host->dev_index);
+
+ return sclk / clk_div;
}
static void exynos_dwmci_board_init(struct dwmci_host *host)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index c6a1c23..8ab0bc9 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -430,7 +430,7 @@
mmc->ocr = cmd.response[0];
mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
- mmc->rca = 0;
+ mmc->rca = 1;
return 0;
}
@@ -1442,67 +1442,44 @@
}
/*
- * This function shall form and send the commands to open / close the
- * boot partition specified by user.
- *
- * Input Parameters:
- * ack: 0x0 - No boot acknowledge sent (default)
- * 0x1 - Boot acknowledge sent during boot operation
- * part_num: User selects boot data that will be sent to master
- * 0x0 - Device not boot enabled (default)
- * 0x1 - Boot partition 1 enabled for boot
- * 0x2 - Boot partition 2 enabled for boot
- * access: User selects partitions to access
- * 0x0 : No access to boot partition (default)
- * 0x1 : R/W boot partition 1
- * 0x2 : R/W boot partition 2
- * 0x3 : R/W Replay Protected Memory Block (RPMB)
+ * Modify EXT_CSD[177] which is BOOT_BUS_WIDTH
+ * based on the passed in values for BOOT_BUS_WIDTH, RESET_BOOT_BUS_WIDTH
+ * and BOOT_MODE.
*
* Returns 0 on success.
*/
-int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode)
{
int err;
- struct mmc_cmd cmd;
- /* Boot ack enable, boot partition enable , boot partition access */
- cmd.cmdidx = MMC_CMD_SWITCH;
- cmd.resp_type = MMC_RSP_R1b;
-
- cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_PART_CONF << 16) |
- ((EXT_CSD_BOOT_ACK(ack) |
- EXT_CSD_BOOT_PART_NUM(part_num) |
- EXT_CSD_PARTITION_ACCESS(access)) << 8);
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_BUS_WIDTH,
+ EXT_CSD_BOOT_BUS_WIDTH_MODE(mode) |
+ EXT_CSD_BOOT_BUS_WIDTH_RESET(reset) |
+ EXT_CSD_BOOT_BUS_WIDTH_WIDTH(width));
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err) {
- if (access) {
- debug("mmc boot partition#%d open fail:Error1 = %d\n",
- part_num, err);
- } else {
- debug("mmc boot partition#%d close fail:Error = %d\n",
- part_num, err);
- }
+ if (err)
return err;
- }
+ return 0;
+}
- if (access) {
- /* 4bit transfer mode at booting time. */
- cmd.cmdidx = MMC_CMD_SWITCH;
- cmd.resp_type = MMC_RSP_R1b;
+/*
+ * Modify EXT_CSD[179] which is PARTITION_CONFIG (formerly BOOT_CONFIG)
+ * based on the passed in values for BOOT_ACK, BOOT_PARTITION_ENABLE and
+ * PARTITION_ACCESS.
+ *
+ * Returns 0 on success.
+ */
+int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+ int err;
- cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
- (EXT_CSD_BOOT_BUS_WIDTH << 16) |
- ((1 << 0) << 8);
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF,
+ EXT_CSD_BOOT_ACK(ack) |
+ EXT_CSD_BOOT_PART_NUM(part_num) |
+ EXT_CSD_PARTITION_ACCESS(access));
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err) {
- debug("mmc boot partition#%d open fail:Error2 = %d\n",
- part_num, err);
- return err;
- }
- }
+ if (err)
+ return err;
return 0;
}
#endif
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 610bef5..72a272f 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -23,7 +23,8 @@
host->name = "zynq_sdhci";
host->ioaddr = (void *)regbase;
- host->quirks = SDHCI_QUIRK_NO_CD | SDHCI_QUIRK_WAIT_SEND_CMD;
+ host->quirks = SDHCI_QUIRK_NO_CD | SDHCI_QUIRK_WAIT_SEND_CMD |
+ SDHCI_QUIRK_BROKEN_R1B;
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
host->host_caps = MMC_MODE_HC;
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index f210ed8..3c53f0a 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -73,6 +73,8 @@
#define CONFIG_SPL_SPI_CS 0
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+#define CONFIG_SUPPORT_EMMC_BOOT
+
/* USB xHCI HOST */
#define CONFIG_CMD_USB
#define CONFIG_USB_HOST
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 76c5106..3df502e 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -37,6 +37,7 @@
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
#define CONFIG_HSMMC2_8BIT
+#define CONFIG_SUPPORT_EMMC_BOOT
/* Required support for the TCA642X GPIO we have on the uEVM */
#define CONFIG_TCA642X
diff --git a/include/dwmmc.h b/include/dwmmc.h
index a02dd67..b641558 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -142,7 +142,7 @@
void (*clksel)(struct dwmci_host *host);
void (*board_init)(struct dwmci_host *host);
- unsigned int (*get_mmc_clk)(int dev_index);
+ unsigned int (*get_mmc_clk)(struct dwmci_host *host);
};
struct dwmci_idmac {
diff --git a/include/mmc.h b/include/mmc.h
index e1060b9..e95a237 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -187,6 +187,9 @@
#define EXT_CSD_BOOT_PART_NUM(x) (x << 3)
#define EXT_CSD_PARTITION_ACCESS(x) (x << 0)
+#define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3)
+#define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
+#define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
#define R1_ILLEGAL_COMMAND (1 << 22)
#define R1_APP_CMD (1 << 5)
@@ -310,8 +313,10 @@
/* Function to change the size of boot partition and rpmb partitions */
int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
unsigned long rpmbsize);
-/* Function to send commands to open/close the specified boot partition */
-int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
+/* Function to modify the PARTITION_CONFIG field of EXT_CSD */
+int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
+/* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */
+int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode);
/**
* Start device initialization and return immediately; it does not block on
diff --git a/include/spl.h b/include/spl.h
index 5e24856..dad00c0 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -16,6 +16,7 @@
#define MMCSD_MODE_UNDEFINED 0
#define MMCSD_MODE_RAW 1
#define MMCSD_MODE_FAT 2
+#define MMCSD_MODE_EMMCBOOT 3
struct spl_image_info {
const char *name;