phy: marvell: a3700: Convert to official DT bindings in COMPHY driver
Convert A3720 common PHY driver to official DT bindings.
This puts us closer to be able to synchronize A3720 device-trees with
those from Linux.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index cba6139..360d521 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -80,24 +80,6 @@
};
};
-&comphy {
- max-lanes = <3>;
- phy0 {
- phy-type = <COMPHY_TYPE_USB3_HOST0>;
- phy-speed = <COMPHY_SPEED_5G>;
- };
-
- phy1 {
- phy-type = <COMPHY_TYPE_PEX0>;
- phy-speed = <COMPHY_SPEED_2_5G>;
- };
-
- phy2 {
- phy-type = <COMPHY_TYPE_SATA0>;
- phy-speed = <COMPHY_SPEED_5G>;
- };
-};
-
ð0 {
status = "okay";
pinctrl-names = "default";
@@ -119,6 +101,7 @@
/* CON3 */
&sata {
status = "okay";
+ phys = <&comphy2 0>;
};
&sdhci0 {
@@ -200,6 +183,7 @@
/* CON31 */
&usb3 {
status = "okay";
+ phys = <&comphy0 0>;
};
&pcie0 {
@@ -207,4 +191,5 @@
pinctrl-0 = <&pcie_pins>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
+ phys = <&comphy1 0>;
};
diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
index f47ced0..d017570 100644
--- a/arch/arm/dts/armada-3720-turris-mox.dts
+++ b/arch/arm/dts/armada-3720-turris-mox.dts
@@ -94,24 +94,6 @@
};
};
-&comphy {
- max-lanes = <3>;
- phy0 {
- phy-type = <COMPHY_TYPE_SGMII1>;
- phy-speed = <COMPHY_SPEED_3_125G>;
- };
-
- phy1 {
- phy-type = <COMPHY_TYPE_PEX0>;
- phy-speed = <COMPHY_SPEED_5G>;
- };
-
- phy2 {
- phy-type = <COMPHY_TYPE_USB3_HOST0>;
- phy-speed = <COMPHY_SPEED_5G>;
- };
-};
-
ð0 {
status = "okay";
pinctrl-names = "default";
@@ -120,6 +102,11 @@
phy = <ð_phy1>;
};
+ð1 {
+ phy-mode = "2500base-x";
+ phys = <&comphy0 1>;
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -222,6 +209,7 @@
&usb3 {
vbus-supply = <®_usb3_vbus>;
status = "okay";
+ phys = <&comphy2 0>;
};
&pcie0 {
@@ -229,4 +217,5 @@
pinctrl-0 = <&pcie_pins>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "disabled";
+ phys = <&comphy1 0>;
};
diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 4bf6d2e..58557c6 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -106,36 +106,21 @@
};
};
-&comphy {
- phy0 {
- phy-type = <COMPHY_TYPE_SGMII1>;
- phy-speed = <COMPHY_SPEED_1_25G>;
- };
-
- phy1 {
- phy-type = <COMPHY_TYPE_SGMII0>;
- phy-speed = <COMPHY_SPEED_1_25G>;
- };
-
- phy2 {
- phy-type = <COMPHY_TYPE_USB3_HOST1>;
- phy-speed = <COMPHY_SPEED_5G>;
- };
-};
-
ð0 {
pinctrl-0 = <&pcie_pins>;
status = "okay";
- phy-mode = "2500base-x";
+ phy-mode = "sgmii";
managed = "in-band-status";
phy = <ðphy0>;
+ phys = <&comphy1 0>;
};
ð1 {
status = "okay";
- phy-mode = "2500base-x";
+ phy-mode = "sgmii";
managed = "in-band-status";
phy = <ðphy1>;
+ phys = <&comphy0 1>;
};
&i2c0 {
diff --git a/arch/arm/dts/armada-37xx.dtsi b/arch/arm/dts/armada-37xx.dtsi
index fec3460..bef6ef0 100644
--- a/arch/arm/dts/armada-37xx.dtsi
+++ b/arch/arm/dts/armada-37xx.dtsi
@@ -316,9 +316,23 @@
compatible = "marvell,mvebu-comphy", "marvell,comphy-armada-3700";
reg = <0x18300 0x28>,
<0x1f300 0x3d000>;
- mux-bitcount = <4>;
- mux-lane-order = <1 0 2>;
- max-lanes = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ comphy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
};
};
diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
index 047c8bb..4104353 100644
--- a/drivers/phy/marvell/comphy_a3700.c
+++ b/drivers/phy/marvell/comphy_a3700.c
@@ -11,6 +11,7 @@
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <linux/delay.h>
+#include <phy.h>
#include "comphy_a3700.h"
@@ -982,6 +983,138 @@
debug_exit();
}
+static int find_available_node_by_compatible(int offset, const char *compatible)
+{
+ do {
+ offset = fdt_node_offset_by_compatible(gd->fdt_blob, offset,
+ compatible);
+ } while (offset > 0 && !fdtdec_get_is_enabled(gd->fdt_blob, offset));
+
+ return offset;
+}
+
+static bool comphy_a3700_find_lane(const int nodes[3], int node,
+ int port, int *lane, int *invert)
+{
+ int res, i, j;
+
+ for (i = 0; ; i++) {
+ struct fdtdec_phandle_args args;
+
+ res = fdtdec_parse_phandle_with_args(gd->fdt_blob, node, "phys",
+ "#phy-cells", 0, i, &args);
+ if (res)
+ return false;
+
+ for (j = 0; j < 3; j++) {
+ if (nodes[j] >= 0 && args.node == nodes[j] &&
+ (args.args_count >= 1 ? args.args[0] : 0) == port) {
+ *lane = j;
+ *invert = args.args_count >= 2 ? args.args[1]
+ : 0;
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+static void comphy_a3700_fill_cfg(struct chip_serdes_phy_config *cfg,
+ const int nodes[3], const char *compatible,
+ int type)
+{
+ int node, lane, port, speed, invert;
+
+ port = (type == COMPHY_TYPE_SGMII1) ? 1 : 0;
+
+ node = -1;
+ while (1) {
+ node = find_available_node_by_compatible(node, compatible);
+ if (node < 0)
+ return;
+
+ if (comphy_a3700_find_lane(nodes, node, port, &lane, &invert))
+ break;
+ }
+
+ if (cfg->comphy_map_data[lane].type != COMPHY_TYPE_UNCONNECTED) {
+ printf("Error: More PHYs defined for lane %d, skipping\n",
+ lane);
+ return;
+ }
+
+ if (type == COMPHY_TYPE_SGMII0 || type == COMPHY_TYPE_SGMII1) {
+ const char *phy_mode;
+
+ phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
+ if (phy_mode &&
+ !strcmp(phy_mode,
+ phy_string_for_interface(PHY_INTERFACE_MODE_2500BASEX)))
+ speed = COMPHY_SPEED_3_125G;
+ else
+ speed = COMPHY_SPEED_1_25G;
+ } else if (type == COMPHY_TYPE_SATA0) {
+ speed = COMPHY_SPEED_6G;
+ } else {
+ speed = COMPHY_SPEED_5G;
+ }
+
+ cfg->comphy_map_data[lane].type = type;
+ cfg->comphy_map_data[lane].speed = speed;
+ cfg->comphy_map_data[lane].invert = invert;
+}
+
+static const fdt32_t comphy_a3700_mux_lane_order[3] = {
+ __constant_cpu_to_be32(1),
+ __constant_cpu_to_be32(0),
+ __constant_cpu_to_be32(2),
+};
+
+int comphy_a3700_init_serdes_map(int node, struct chip_serdes_phy_config *cfg)
+{
+ int comphy_nodes[3];
+ int child, i;
+
+ for (i = 0; i < ARRAY_SIZE(comphy_nodes); i++)
+ comphy_nodes[i] = -FDT_ERR_NOTFOUND;
+
+ fdt_for_each_subnode(child, gd->fdt_blob, node) {
+ if (!fdtdec_get_is_enabled(gd->fdt_blob, child))
+ continue;
+
+ i = fdtdec_get_int(gd->fdt_blob, child, "reg", -1);
+ if (i < 0 || i >= ARRAY_SIZE(comphy_nodes))
+ continue;
+
+ comphy_nodes[i] = child;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(comphy_nodes); i++) {
+ cfg->comphy_map_data[i].type = COMPHY_TYPE_UNCONNECTED;
+ cfg->comphy_map_data[i].speed = COMPHY_SPEED_INVALID;
+ }
+
+ comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada3700-u3d",
+ COMPHY_TYPE_USB3_DEVICE);
+ comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada3700-xhci",
+ COMPHY_TYPE_USB3_HOST0);
+ comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada-3700-pcie",
+ COMPHY_TYPE_PEX0);
+ comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada-3700-ahci",
+ COMPHY_TYPE_SATA0);
+ comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada-3700-neta",
+ COMPHY_TYPE_SGMII0);
+ comphy_a3700_fill_cfg(cfg, comphy_nodes, "marvell,armada-3700-neta",
+ COMPHY_TYPE_SGMII1);
+
+ cfg->comphy_lanes_count = 3;
+ cfg->comphy_mux_bitcount = 4;
+ cfg->comphy_mux_lane_order = comphy_a3700_mux_lane_order;
+
+ return 0;
+}
+
int comphy_a3700_init(struct chip_serdes_phy_config *chip_cfg,
struct comphy_map *serdes_map)
{
diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c
index 2c9d7b2..233a973 100644
--- a/drivers/phy/marvell/comphy_core.c
+++ b/drivers/phy/marvell/comphy_core.c
@@ -86,11 +86,8 @@
static int comphy_probe(struct udevice *dev)
{
- const void *blob = gd->fdt_blob;
int node = dev_of_offset(dev);
struct chip_serdes_phy_config *chip_cfg = dev_get_priv(dev);
- int subnode;
- int lane;
int last_idx = 0;
static int current_idx;
int res;
@@ -104,30 +101,14 @@
if (IS_ERR(chip_cfg->hpipe3_base_addr))
return PTR_ERR(chip_cfg->hpipe3_base_addr);
- chip_cfg->comphy_lanes_count = fdtdec_get_int(blob, node,
- "max-lanes", 0);
- if (chip_cfg->comphy_lanes_count <= 0) {
- dev_err(dev, "comphy max lanes is wrong\n");
- return -EINVAL;
- }
-
- chip_cfg->comphy_mux_bitcount = fdtdec_get_int(blob, node,
- "mux-bitcount", 0);
- if (chip_cfg->comphy_mux_bitcount <= 0) {
- dev_err(dev, "comphy mux bit count is wrong\n");
- return -EINVAL;
- }
-
- chip_cfg->comphy_mux_lane_order =
- fdtdec_locate_array(blob, node, "mux-lane-order",
- chip_cfg->comphy_lanes_count);
-
if (device_is_compatible(dev, "marvell,comphy-armada-3700")) {
+ chip_cfg->comphy_init_map = comphy_a3700_init_serdes_map;
chip_cfg->ptr_comphy_chip_init = comphy_a3700_init;
chip_cfg->rx_training = NULL;
}
if (device_is_compatible(dev, "marvell,comphy-cp110")) {
+ chip_cfg->comphy_init_map = comphy_cp110_init_serdes_map;
chip_cfg->ptr_comphy_chip_init = comphy_cp110_init;
chip_cfg->rx_training = comphy_cp110_sfi_rx_training;
}
@@ -141,39 +122,9 @@
return -ENODEV;
}
- lane = 0;
- fdt_for_each_subnode(subnode, blob, node) {
- /* Skip disabled ports */
- if (!fdtdec_get_is_enabled(blob, subnode))
- continue;
-
- chip_cfg->comphy_map_data[lane].type =
- fdtdec_get_int(blob, subnode, "phy-type",
- COMPHY_TYPE_INVALID);
-
- if (chip_cfg->comphy_map_data[lane].type ==
- COMPHY_TYPE_INVALID) {
- printf("no phy type for lane %d, setting lane as unconnected\n",
- lane + 1);
- continue;
- }
-
- chip_cfg->comphy_map_data[lane].speed =
- fdtdec_get_int(blob, subnode, "phy-speed",
- COMPHY_SPEED_INVALID);
-
- chip_cfg->comphy_map_data[lane].invert =
- fdtdec_get_int(blob, subnode, "phy-invert",
- COMPHY_POLARITY_NO_INVERT);
-
- chip_cfg->comphy_map_data[lane].clk_src =
- fdtdec_get_bool(blob, subnode, "clk-src");
-
- chip_cfg->comphy_map_data[lane].end_point =
- fdtdec_get_bool(blob, subnode, "end_point");
-
- lane++;
- }
+ res = chip_cfg->comphy_init_map(node, chip_cfg);
+ if (res < 0)
+ return res;
res = comphy_update_map(chip_cfg->comphy_map_data, chip_cfg->comphy_lanes_count);
if (res < 0)
diff --git a/drivers/phy/marvell/comphy_core.h b/drivers/phy/marvell/comphy_core.h
index 9bbd7f8..d573776 100644
--- a/drivers/phy/marvell/comphy_core.h
+++ b/drivers/phy/marvell/comphy_core.h
@@ -32,6 +32,7 @@
struct chip_serdes_phy_config {
struct comphy_mux_data *mux_data;
+ int (*comphy_init_map)(int, struct chip_serdes_phy_config *);
int (*ptr_comphy_chip_init)(struct chip_serdes_phy_config *,
struct comphy_map *);
int (*rx_training)(struct chip_serdes_phy_config *, u32);
@@ -85,9 +86,20 @@
/* SoC specific init functions */
#ifdef CONFIG_ARMADA_3700
+int comphy_a3700_init_serdes_map(int node, struct chip_serdes_phy_config *cfg);
int comphy_a3700_init(struct chip_serdes_phy_config *ptr_chip_cfg,
struct comphy_map *serdes_map);
#else
+static inline int
+comphy_a3700_init_serdes_map(int node, struct chip_serdes_phy_config *cfg)
+{
+ /*
+ * This function should never be called in this configuration, so
+ * lets return an error here.
+ */
+ return -1;
+}
+
static inline int comphy_a3700_init(struct chip_serdes_phy_config *ptr_chip_cfg,
struct comphy_map *serdes_map)
{
@@ -100,11 +112,22 @@
#endif
#ifdef CONFIG_ARMADA_8K
+int comphy_cp110_init_serdes_map(int node, struct chip_serdes_phy_config *cfg);
int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
struct comphy_map *serdes_map);
int comphy_cp110_sfi_rx_training(struct chip_serdes_phy_config *ptr_chip_cfg,
u32 lane);
#else
+static inline int
+comphy_cp110_init_serdes_map(int node, struct chip_serdes_phy_config *cfg)
+{
+ /*
+ * This function should never be called in this configuration, so
+ * lets return an error here.
+ */
+ return -1;
+}
+
static inline int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
struct comphy_map *serdes_map)
{
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index 4fe2dfc..e063b51 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -554,6 +554,64 @@
debug_exit();
}
+int comphy_cp110_init_serdes_map(int node, struct chip_serdes_phy_config *cfg)
+{
+ int lane, subnode;
+
+ cfg->comphy_lanes_count = fdtdec_get_int(gd->fdt_blob, node,
+ "max-lanes", 0);
+ if (cfg->comphy_lanes_count <= 0) {
+ printf("comphy max lanes is wrong\n");
+ return -EINVAL;
+ }
+
+ cfg->comphy_mux_bitcount = fdtdec_get_int(gd->fdt_blob, node,
+ "mux-bitcount", 0);
+ if (cfg->comphy_mux_bitcount <= 0) {
+ printf("comphy mux bit count is wrong\n");
+ return -EINVAL;
+ }
+
+ cfg->comphy_mux_lane_order = fdtdec_locate_array(gd->fdt_blob, node,
+ "mux-lane-order",
+ cfg->comphy_lanes_count);
+
+ lane = 0;
+ fdt_for_each_subnode(subnode, gd->fdt_blob, node) {
+ /* Skip disabled ports */
+ if (!fdtdec_get_is_enabled(gd->fdt_blob, subnode))
+ continue;
+
+ cfg->comphy_map_data[lane].type =
+ fdtdec_get_int(gd->fdt_blob, subnode, "phy-type",
+ COMPHY_TYPE_INVALID);
+
+ if (cfg->comphy_map_data[lane].type == COMPHY_TYPE_INVALID) {
+ printf("no phy type for lane %d, setting lane as unconnected\n",
+ lane + 1);
+ continue;
+ }
+
+ cfg->comphy_map_data[lane].speed =
+ fdtdec_get_int(gd->fdt_blob, subnode, "phy-speed",
+ COMPHY_SPEED_INVALID);
+
+ cfg->comphy_map_data[lane].invert =
+ fdtdec_get_int(gd->fdt_blob, subnode, "phy-invert",
+ COMPHY_POLARITY_NO_INVERT);
+
+ cfg->comphy_map_data[lane].clk_src =
+ fdtdec_get_bool(gd->fdt_blob, subnode, "clk-src");
+
+ cfg->comphy_map_data[lane].end_point =
+ fdtdec_get_bool(gd->fdt_blob, subnode, "end_point");
+
+ lane++;
+ }
+
+ return 0;
+}
+
int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
struct comphy_map *serdes_map)
{