arm64: dts: zynqmp: make hw-ecc as the default ecc mode
Except for Linux no other component (i.e., u-boot, fsbl
or BootRom) of the software stack supports software ecc
engine. So, make hw-ecc as the default ecc mode.
Update the same for mini u-boot nand configuration as well.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240325095013.29497-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
diff --git a/arch/arm/dts/zynqmp-mini-nand.dts b/arch/arm/dts/zynqmp-mini-nand.dts
index e0517cf..5889d43 100644
--- a/arch/arm/dts/zynqmp-mini-nand.dts
+++ b/arch/arm/dts/zynqmp-mini-nand.dts
@@ -50,6 +50,12 @@
#size-cells = <1>;
arasan,has-mdma;
num-cs = <2>;
+ nand@0 {
+ reg = <0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ nand-ecc-mode = "hw";
+ };
};
};
};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
index b97f7ee..48ab619 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
@@ -136,8 +136,7 @@
reg = <0x0>;
#address-cells = <0x2>;
#size-cells = <0x1>;
- nand-ecc-mode = "soft";
- nand-ecc-algo = "bch";
+ nand-ecc-mode = "hw";
nand-rb = <0>;
label = "main-storage-0";
nand-ecc-step-size = <1024>;
@@ -173,8 +172,7 @@
reg = <0x1>;
#address-cells = <0x2>;
#size-cells = <0x1>;
- nand-ecc-mode = "soft";
- nand-ecc-algo = "bch";
+ nand-ecc-mode = "hw";
nand-rb = <0>;
label = "main-storage-1";
nand-ecc-step-size = <1024>;