ARM: rmobile: Sync Gen2 DTS with Linux v4.17
Sync the DTs with Linux v4.17.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/arch/arm/dts/r8a7790-lager.dts b/arch/arm/dts/r8a7790-lager.dts
index c97d59a..dcda98c 100644
--- a/arch/arm/dts/r8a7790-lager.dts
+++ b/arch/arm/dts/r8a7790-lager.dts
@@ -48,8 +48,11 @@
serial0 = &scif0;
serial1 = &scifa1;
i2c8 = &gpioi2c1;
+ i2c9 = &gpioi2c2;
i2c10 = &i2cexio0;
i2c11 = &i2cexio1;
+ i2c12 = &i2chdmi;
+ i2c13 = &i2cpwr;
};
chosen {
@@ -241,6 +244,12 @@
};
};
+ cec_clock: cec-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
hdmi-out {
compatible = "hdmi-connector";
type = "a";
@@ -269,12 +278,21 @@
#size-cells = <0>;
compatible = "i2c-gpio";
status = "disabled";
- gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */
- &gpio1 16 GPIO_ACTIVE_HIGH /* scl */
- >;
+ scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <5>;
};
+ gpioi2c2: i2c-9 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <5>;
+ };
+
/*
* IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
* We use the I2C demuxer, so the desired IP core can be selected at runtime
@@ -305,6 +323,138 @@
i2c-bus-name = "i2c-exio1";
#address-cells = <1>;
#size-cells = <0>;
+ };
+
+ /*
+ * IIC2 and I2C2 may be switched using pinmux.
+ * A fallback to GPIO is also provided.
+ */
+ i2chdmi: i2c-12 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+ i2c-bus-name = "i2c-hdmi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ak4643: codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
+ };
+ };
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&cec_clock>;
+ clock-names = "cec";
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ hdmi-in@4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ default-input = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ adv7612_out: endpoint {
+ remote-endpoint = <&vin0ep2>;
+ };
+ };
+ };
+ };
+ };
+
+ /*
+ * IIC3 and I2C3 may be switched using pinmux.
+ * IIC3/I2C3 does not appear to support fallback to GPIO.
+ */
+ i2cpwr: i2c-13 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&iic3>, <&i2c3>;
+ i2c-bus-name = "i2c-pwr";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+
+ vdd_dvfs: regulator@68 {
+ compatible = "dlg,da9210";
+ reg = <0x68>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
};
@@ -314,10 +464,8 @@
status = "okay";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
<&x13_clk>, <&x2_clk>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
- "dclkin.0", "dclkin.1";
+ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
ports {
port@0 {
@@ -325,12 +473,26 @@
remote-endpoint = <&adv7123_in>;
};
};
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
port@1 {
endpoint {
remote-endpoint = <&adv7511_in>;
};
};
- port@2 {
+ };
+};
+
+&lvds1 {
+ status = "okay";
+
+ ports {
+ port@1 {
lvds_connector: endpoint {
};
};
@@ -435,11 +597,21 @@
function = "iic1";
};
+ i2c2_pins: i2c2 {
+ groups = "i2c2";
+ function = "i2c2";
+ };
+
iic2_pins: iic2 {
groups = "iic2";
function = "iic2";
};
+ i2c3_pins: i2c3 {
+ groups = "i2c3";
+ function = "i2c3";
+ };
+
iic3_pins: iic3 {
groups = "iic3";
function = "iic3";
@@ -641,124 +813,28 @@
pinctrl-names = "i2c-exio1";
};
-&iic2 {
- status = "okay";
- pinctrl-0 = <&iic2_pins>;
- pinctrl-names = "default";
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "i2c-hdmi";
clock-frequency = <100000>;
-
- ak4643: codec@12 {
- compatible = "asahi-kasei,ak4643";
- #sound-dai-cells = <0>;
- reg = <0x12>;
- };
-
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- remote = <&vin1>;
-
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin1ep0>;
- };
- };
- };
-
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&du_out_lvds0>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
- };
- };
-
- hdmi-in@4c {
- compatible = "adi,adv7612";
- reg = <0x4c>;
- interrupt-parent = <&gpio1>;
- interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
- default-input = <0>;
+};
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+&iic2 {
+ pinctrl-0 = <&iic2_pins>;
+ pinctrl-names = "i2c-hdmi";
- port@0 {
- reg = <0>;
- adv7612_in: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
- };
+ clock-frequency = <100000>;
+};
- port@2 {
- reg = <2>;
- adv7612_out: endpoint {
- remote-endpoint = <&vin0ep2>;
- };
- };
- };
- };
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "i2c-pwr";
};
-&iic3 {
- pinctrl-names = "default";
+&iic3 {
pinctrl-0 = <&iic3_pins>;
- status = "okay";
-
- pmic@58 {
- compatible = "dlg,da9063";
- reg = <0x58>;
- interrupt-parent = <&irqc0>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- wdt {
- compatible = "dlg,da9063-watchdog";
- };
- };
-
- vdd_dvfs: regulator@68 {
- compatible = "dlg,da9210";
- reg = <0x68>;
- interrupt-parent = <&irqc0>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-boot-on;
- regulator-always-on;
- };
+ pinctrl-names = "i2c-pwr";
};
&pci0 {