ppc4xx: add support for new PMC440 revision with cleanup
This patch adds support for the new PMC440 hardware revision 1.4.
The board now uses Micrel KSZ9031 phys.
Add missing i2c initialization before reading bootstrap eeprom.
Fix a couple of coding style issues.
Make local functions static.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index e86996c..062ae67 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -12,7 +12,6 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
-
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
@@ -34,14 +33,14 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
extern void __ft_board_setup(void *blob, bd_t *bd);
ulong flash_get_size(ulong base, int banknum);
-int pci_is_66mhz(void);
+static int pci_is_66mhz(void);
int is_monarch(void);
-int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
- uchar *buffer, unsigned cnt);
+static int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt);
struct serial_device *default_serial_console(void)
{
@@ -58,23 +57,24 @@
if (((val & 0xf0000000) >> 29) != 7)
return &eserial2_device;
- ulong scratchreg = in_be32((void*)GPIO0_ISR3L);
+ ulong scratchreg = in_be32((void *)GPIO0_ISR3L);
if (!(scratchreg & 0x80)) {
/* mark scratchreg valid */
scratchreg = (scratchreg & 0xffffff00) | 0x80;
+ i2c_init_all();
+
i = bootstrap_eeprom_read(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
0x10, buf, 4);
if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
scratchreg |= buf[2];
/* bringup delay for console */
- for (delay=0; delay<(1000 * (ulong)buf[3]); delay++) {
+ for (delay = 0; delay < (1000 * (ulong)buf[3]); delay++)
udelay(1000);
- }
} else
scratchreg |= 0x01;
- out_be32((void*)GPIO0_ISR3L, scratchreg);
+ out_be32((void *)GPIO0_ISR3L, scratchreg);
}
if (scratchreg & 0x01)
@@ -93,10 +93,7 @@
mtdcr(EBC0_CFGADDR, EBC0_CFG);
mtdcr(EBC0_CFGDATA, 0xf8400000);
- /*
- * Setup the GPIO pins
- * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file
- */
+ /* Setup the GPIO pins */
out_be32((void *)GPIO0_OR, 0x40000102);
out_be32((void *)GPIO0_TCR, 0x4c90011f);
out_be32((void *)GPIO0_OSRL, 0x28051400);
@@ -259,7 +256,7 @@
* USB suff...
*/
if ((act == NULL || strcmp(act, "host") == 0) &&
- !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)){
+ !(in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT)) {
/* SDR Setting */
mfsdr(SDR0_PFC1, sdr0_pfc1);
mfsdr(SDR0_USB2D0CR, usb2d0cr);
@@ -326,16 +323,16 @@
mtsdr(SDR0_SRST1, 0x00000000);
mtsdr(SDR0_SRST0, 0x00000000);
- if (!(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
+ if (!(in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT)) {
/* enable power on USB socket */
- out_be32((void*)GPIO1_OR,
- in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+ out_be32((void *)GPIO1_OR,
+ in_be32((void *)GPIO1_OR) & ~GPIO1_USB_PWR_N);
}
printf("USB: Host\n");
} else if ((strcmp(act, "dev") == 0) ||
- (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
+ (in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT)) {
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
@@ -414,30 +411,31 @@
#endif
/* turn off POST LED */
- out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_POST_N);
+ out_be32((void *)GPIO1_OR, in_be32((void *)GPIO1_OR) & ~GPIO1_POST_N);
/* turn on RUN LED */
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~GPIO0_LED_RUN_N);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) & ~GPIO0_LED_RUN_N);
return 0;
}
int is_monarch(void)
{
- if (in_be32((void*)GPIO1_IR) & GPIO1_NONMONARCH)
+ if (in_be32((void *)GPIO1_IR) & GPIO1_NONMONARCH)
return 0;
return 1;
}
-int pci_is_66mhz(void)
+static int pci_is_66mhz(void)
{
- if (in_be32((void*)GPIO1_IR) & GPIO1_M66EN)
+ if (in_be32((void *)GPIO1_IR) & GPIO1_M66EN)
return 1;
return 0;
}
-int board_revision(void)
+static int board_revision(void)
{
- return (int)((in_be32((void*)GPIO1_IR) & GPIO1_HWID_MASK) >> 4);
+ return (int)((in_be32((void *)GPIO1_IR) & GPIO1_HWID_MASK) >> 4);
}
int checkboard(void)
@@ -495,7 +493,7 @@
out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Addr */
out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIL0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */
/* and enable region */
@@ -532,7 +530,8 @@
if (is_monarch()) {
/* BAR2: map FPGA registers behind system memory at 1GB */
- pci_hose_write_config_dword(hose, 0, PCI_BASE_ADDRESS_2, 0x40000008);
+ pci_hose_write_config_dword(hose, 0,
+ PCI_BASE_ADDRESS_2, 0x40000008);
}
/*
@@ -562,10 +561,10 @@
CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
/* PCI configuration done: release ERREADY */
- out_be32((void*)GPIO1_OR,
- in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY);
- out_be32((void*)GPIO1_TCR,
- in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY);
+ out_be32((void *)GPIO1_OR,
+ in_be32((void *)GPIO1_OR) | GPIO1_PPC_EREADY);
+ out_be32((void *)GPIO1_TCR,
+ in_be32((void *)GPIO1_TCR) | GPIO1_PPC_EREADY);
} else {
/* Program the board's subsystem id/classcode */
pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID,
@@ -595,14 +594,14 @@
static void wait_for_pci_ready(void)
{
- if (!(in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY)) {
+ if (!(in_be32((void *)GPIO1_IR) & GPIO1_PPC_EREADY)) {
printf("PCI: Waiting for EREADY (CTRL-C to skip) ... ");
while (1) {
if (ctrlc()) {
puts("abort\n");
break;
}
- if (in_be32((void*)GPIO1_IR) & GPIO1_PPC_EREADY) {
+ if (in_be32((void *)GPIO1_IR) & GPIO1_PPC_EREADY) {
printf("done\n");
break;
}
@@ -641,34 +640,73 @@
#endif /* defined(CONFIG_PCI) */
#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
+static int pmc440_setup_vsc8601(char *devname, int phy_addr,
+ unsigned short behavior, unsigned short method)
{
- char *s;
- unsigned short val_method, val_behavior;
+ /* adjust LED behavior */
+ if (miiphy_write(devname, phy_addr, 0x1f, 0x0001) != 0) {
+ printf("Phy%d: register write access failed\n", phy_addr);
+ return -1;
+ }
- /* special LED setup for NGCC/CANDES */
- if ((s = getenv("bd_type")) &&
- ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) {
- val_method = 0x0e0a;
- val_behavior = 0x0cf2;
- } else {
- /* PMC440 standard type */
- val_method = 0x0e10;
- val_behavior = 0x0cf0;
+ miiphy_write(devname, phy_addr, 0x11, 0x0010);
+ miiphy_write(devname, phy_addr, 0x11, behavior);
+ miiphy_write(devname, phy_addr, 0x10, method);
+ miiphy_write(devname, phy_addr, 0x1f, 0x0000);
+
+ return 0;
+}
+
+static int pmc440_setup_ksz9031(char *devname, int phy_addr)
+{
+ unsigned short id1, id2;
+
+ if (miiphy_read(devname, phy_addr, 2, &id1) ||
+ miiphy_read(devname, phy_addr, 3, &id2)) {
+ printf("Phy%d: cannot read id\n", phy_addr);
+ return -1;
}
- if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) {
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010);
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, val_behavior);
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, val_method);
- miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0000);
+ if ((id1 != 0x0022) || ((id2 & 0xfff0) != 0x1620)) {
+ printf("Phy%d: unexpected id\n", phy_addr);
+ return -1;
}
- if (miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0001) == 0) {
- miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0010);
- miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, val_behavior);
- miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, val_method);
- miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0000);
+ /* MMD 2.08: adjust tx_clk pad skew */
+ miiphy_write(devname, phy_addr, 0x0d, 2);
+ miiphy_write(devname, phy_addr, 0x0e, 8);
+ miiphy_write(devname, phy_addr, 0x0d, 0x4002);
+ miiphy_write(devname, phy_addr, 0x0e, 0xf | (0x17 << 5));
+
+ return 0;
+}
+
+void reset_phy(void)
+{
+ char *s;
+ unsigned short val_method, val_behavior;
+
+ if (gd->board_type < 4) {
+ /* special LED setup for NGCC/CANDES */
+ s = getenv("bd_type");
+ if (s && ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) {
+ val_method = 0x0e0a;
+ val_behavior = 0x0cf2;
+ } else {
+ /* PMC440 standard type */
+ val_method = 0x0e10;
+ val_behavior = 0x0cf0;
+ }
+
+ /* boards up to rev. 1.3 use Vitesse VSC8601 phys */
+ pmc440_setup_vsc8601("ppc_4xx_eth0", CONFIG_PHY_ADDR,
+ val_method, val_behavior);
+ pmc440_setup_vsc8601("ppc_4xx_eth1", CONFIG_PHY1_ADDR,
+ val_method, val_behavior);
+ } else {
+ /* rev. 1.4 uses a Micrel KSZ9031 */
+ pmc440_setup_ksz9031("ppc_4xx_eth0", CONFIG_PHY_ADDR);
+ pmc440_setup_ksz9031("ppc_4xx_eth1", CONFIG_PHY1_ADDR);
}
}
#endif
@@ -729,7 +767,6 @@
* We must write the address again when changing pages
* because the address counter only increments within a page.
*/
-
while (offset < end) {
unsigned alen, len;
unsigned maxlen;
@@ -771,8 +808,8 @@
return rcode;
}
-int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset,
- uchar *buffer, unsigned cnt)
+static int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
unsigned blk_off;
@@ -820,10 +857,10 @@
int i;
if ((act == NULL || strcmp(act, "host") == 0) &&
- !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT))
+ !(in_be32((void *)GPIO0_IR) & GPIO0_USB_PRSNT))
/* enable power on USB socket */
- out_be32((void*)GPIO1_OR,
- in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+ out_be32((void *)GPIO1_OR,
+ in_be32((void *)GPIO1_OR) & ~GPIO1_USB_PWR_N);
for (i=0; i<1000; i++)
udelay(1000);
@@ -834,7 +871,7 @@
int usb_board_stop(void)
{
/* disable power on USB socket */
- out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_USB_PWR_N);
+ out_be32((void *)GPIO1_OR, in_be32((void *)GPIO1_OR) | GPIO1_USB_PWR_N);
return 0;
}
@@ -858,8 +895,8 @@
rc = fdt_find_and_setprop(blob, "/plb/pci@1ec000000", "status",
"disabled", sizeof("disabled"), 1);
if (rc) {
- printf("Unable to update property status in PCI node, err=%s\n",
- fdt_strerror(rc));
+ printf("Unable to update property status in PCI node, ");
+ printf("err=%s\n", fdt_strerror(rc));
}
}
}