diff --git a/cpu/at91rm9200/cpu.c b/cpu/at91rm9200/cpu.c
index a7e2ca9..a464f29 100644
--- a/cpu/at91rm9200/cpu.c
+++ b/cpu/at91rm9200/cpu.c
@@ -121,7 +121,7 @@
     reset_cpu(0);
 #else
 #ifdef CONFIG_DBGU
-   AT91PS_USART us = AT91C_BASE_DBGU;
+   AT91PS_USART us = (AT91PS_USART) AT91C_BASE_DBGU;
 #endif
 #ifdef CONFIG_USART0
    AT91PS_USART us = AT91C_BASE_US0;
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index 60c1e61..b61aab5 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -77,7 +77,7 @@
 	pcix->powbear1 = 0x00000000;
 	pcix->powar1   = 0x8004401c;	/* 512M MEM space */
 
-	pcix->potar2   = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
+	pcix->potar2   = 0x00000000;
 	pcix->potear2  = 0x00000000;
 	pcix->powbar2  = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
 	pcix->powbear2 = 0x00000000;
@@ -85,12 +85,38 @@
 
 	pcix->pitar1 = 0x00000000;
 	pcix->piwbar1 = 0x00000000;
-	pcix->piwar1 = 0xa0F5501f;
+	pcix->piwar1 = 0xa0f5501e;	/* Enable, Prefetch, Local Mem,
+					 * Snoop R/W, 2G */
 
 	/*
 	 * Hose scan.
 	 */
 	pci_register_hose(hose);
+
+#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
+	/*
+	 * This is a SW workaround for an apparent HW problem
+	 * in the PCI controller on the MPC85555/41 CDS boards.
+	 * The first config cycle must be to a valid, known
+	 * device on the PCI bus in order to trick the PCI
+	 * controller state machine into a known valid state.
+	 * Without this, the first config cycle has the chance
+	 * of hanging the controller permanently, just leaving
+	 * it in a semi-working state, or leaving it working.
+	 *
+	 * Pick on the Tundra, Device 17, to get it right.
+	 */
+	{
+		u8 header_type;
+
+		pci_hose_read_config_byte(hose,
+					  PCI_BDF(0,17,0),
+					  PCI_HEADER_TYPE,
+					  &header_type);
+	}
+	
+#endif
+
 	hose->last_busno = pci_hose_scan(hose);
 }