bootcount: store bootcount var in environment
If no softreset save registers are found on the hardware
"bootcount" is stored in the environment. To prevent a
saveenv on all reboots, the environment variable
"upgrade_available" is introduced. If "upgrade_available" is
0, "bootcount" is always 0 therefore no need to save the
environment on u-boot boot, if "upgrade_available" is 1 "bootcount"
is incremented in the environment and environment gets written
on u-boot start.
So the Userspace Applikation must set the "upgrade_available"
and "bootcount" variable to 0 (for example with fw_setenv),
if a boot was successfully.
Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/drivers/bootcount/bootcount_env.c b/drivers/bootcount/bootcount_env.c
new file mode 100644
index 0000000..2d6e8db
--- /dev/null
+++ b/drivers/bootcount/bootcount_env.c
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2013
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+void bootcount_store(ulong a)
+{
+ int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+
+ if (upgrade_available) {
+ setenv_ulong("bootcount", a);
+ saveenv();
+ }
+}
+
+ulong bootcount_load(void)
+{
+ int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+ ulong val = 0;
+
+ if (upgrade_available)
+ val = getenv_ulong("bootcount", 10, 0);
+
+ return val;
+}