rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index b361eef..bce7548 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -23,7 +23,7 @@
#include <common.h>
-#ifdef CFG_NS16550_SERIAL
+#ifdef CONFIG_SYS_NS16550_SERIAL
#include <ns16550.h>
#ifdef CONFIG_NS87308
@@ -48,13 +48,13 @@
#error "Invalid console index value."
#endif
-#if CONFIG_CONS_INDEX == 1 && !defined(CFG_NS16550_COM1)
+#if CONFIG_CONS_INDEX == 1 && !defined(CONFIG_SYS_NS16550_COM1)
#error "Console port 1 defined but not configured."
-#elif CONFIG_CONS_INDEX == 2 && !defined(CFG_NS16550_COM2)
+#elif CONFIG_CONS_INDEX == 2 && !defined(CONFIG_SYS_NS16550_COM2)
#error "Console port 2 defined but not configured."
-#elif CONFIG_CONS_INDEX == 3 && !defined(CFG_NS16550_COM3)
+#elif CONFIG_CONS_INDEX == 3 && !defined(CONFIG_SYS_NS16550_COM3)
#error "Console port 3 defined but not configured."
-#elif CONFIG_CONS_INDEX == 4 && !defined(CFG_NS16550_COM4)
+#elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4)
#error "Console port 4 defined but not configured."
#endif
@@ -62,23 +62,23 @@
* the array is 0 based.
*/
static NS16550_t serial_ports[4] = {
-#ifdef CFG_NS16550_COM1
- (NS16550_t)CFG_NS16550_COM1,
+#ifdef CONFIG_SYS_NS16550_COM1
+ (NS16550_t)CONFIG_SYS_NS16550_COM1,
#else
NULL,
#endif
-#ifdef CFG_NS16550_COM2
- (NS16550_t)CFG_NS16550_COM2,
+#ifdef CONFIG_SYS_NS16550_COM2
+ (NS16550_t)CONFIG_SYS_NS16550_COM2,
#else
NULL,
#endif
-#ifdef CFG_NS16550_COM3
- (NS16550_t)CFG_NS16550_COM3,
+#ifdef CONFIG_SYS_NS16550_COM3
+ (NS16550_t)CONFIG_SYS_NS16550_COM3,
#else
NULL,
#endif
-#ifdef CFG_NS16550_COM4
- (NS16550_t)CFG_NS16550_COM4
+#ifdef CONFIG_SYS_NS16550_COM4
+ (NS16550_t)CONFIG_SYS_NS16550_COM4
#else
NULL
#endif
@@ -126,7 +126,7 @@
{
#ifdef CONFIG_OMAP1510
/* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
+ if ((CONFIG_SYS_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
port->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
return (1); /* return 1 for base divisor */
}
@@ -134,7 +134,7 @@
#endif
#ifdef CONFIG_OMAP1610
/* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
+ if ((CONFIG_SYS_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
return (26); /* return 26 for base divisor */
}
#endif
@@ -146,11 +146,11 @@
#endif
/* Compute divisor value. Normally, we should simply return:
- * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate
+ * CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
* but we need to round that value by adding 0.5.
* Rounding is especially important at high baud rates.
*/
- return (CFG_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
+ return (CONFIG_SYS_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
(MODE_X_DIV * gd->baudrate);
}
@@ -163,19 +163,19 @@
initialise_ns87308();
#endif
-#ifdef CFG_NS16550_COM1
+#ifdef CONFIG_SYS_NS16550_COM1
clock_divisor = calc_divisor(serial_ports[0]);
NS16550_init(serial_ports[0], clock_divisor);
#endif
-#ifdef CFG_NS16550_COM2
+#ifdef CONFIG_SYS_NS16550_COM2
clock_divisor = calc_divisor(serial_ports[1]);
NS16550_init(serial_ports[1], clock_divisor);
#endif
-#ifdef CFG_NS16550_COM3
+#ifdef CONFIG_SYS_NS16550_COM3
clock_divisor = calc_divisor(serial_ports[2]);
NS16550_init(serial_ports[2], clock_divisor);
#endif
-#ifdef CFG_NS16550_COM4
+#ifdef CONFIG_SYS_NS16550_COM4
clock_divisor = calc_divisor(serial_ports[3]);
NS16550_init(serial_ports[3], clock_divisor);
#endif