rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c
index 8ab5b8e..6520944 100644
--- a/cpu/mcf523x/cpu_init.c
+++ b/cpu/mcf523x/cpu_init.c
@@ -49,69 +49,69 @@
wdog->cr = 0;
#endif
- scm->rambar = (CFG_INIT_RAM_ADDR | SCM_RAMBAR_BDE);
+ scm->rambar = (CONFIG_SYS_INIT_RAM_ADDR | SCM_RAMBAR_BDE);
/* Port configuration */
gpio->par_cs = 0;
-#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
- fbcs->csar0 = CFG_CS0_BASE;
- fbcs->cscr0 = CFG_CS0_CTRL;
- fbcs->csmr0 = CFG_CS0_MASK;
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
+ fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+ fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+ fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
#endif
-#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
gpio->par_cs |= GPIO_PAR_CS_CS1;
- fbcs->csar1 = CFG_CS1_BASE;
- fbcs->cscr1 = CFG_CS1_CTRL;
- fbcs->csmr1 = CFG_CS1_MASK;
+ fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+ fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+ fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
#endif
-#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
gpio->par_cs |= GPIO_PAR_CS_CS2;
- fbcs->csar2 = CFG_CS2_BASE;
- fbcs->cscr2 = CFG_CS2_CTRL;
- fbcs->csmr2 = CFG_CS2_MASK;
+ fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+ fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+ fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
#endif
-#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
gpio->par_cs |= GPIO_PAR_CS_CS3;
- fbcs->csar3 = CFG_CS3_BASE;
- fbcs->cscr3 = CFG_CS3_CTRL;
- fbcs->csmr3 = CFG_CS3_MASK;
+ fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+ fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+ fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
#endif
-#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
gpio->par_cs |= GPIO_PAR_CS_CS4;
- fbcs->csar4 = CFG_CS4_BASE;
- fbcs->cscr4 = CFG_CS4_CTRL;
- fbcs->csmr4 = CFG_CS4_MASK;
+ fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+ fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+ fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
#endif
-#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
gpio->par_cs |= GPIO_PAR_CS_CS5;
- fbcs->csar5 = CFG_CS5_BASE;
- fbcs->cscr5 = CFG_CS5_CTRL;
- fbcs->csmr5 = CFG_CS5_MASK;
+ fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+ fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+ fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
#endif
-#if (defined(CFG_CS6_BASE) && defined(CFG_CS6_MASK) && defined(CFG_CS6_CTRL))
+#if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) && defined(CONFIG_SYS_CS6_CTRL))
gpio->par_cs |= GPIO_PAR_CS_CS6;
- fbcs->csar6 = CFG_CS6_BASE;
- fbcs->cscr6 = CFG_CS6_CTRL;
- fbcs->csmr6 = CFG_CS6_MASK;
+ fbcs->csar6 = CONFIG_SYS_CS6_BASE;
+ fbcs->cscr6 = CONFIG_SYS_CS6_CTRL;
+ fbcs->csmr6 = CONFIG_SYS_CS6_MASK;
#endif
-#if (defined(CFG_CS7_BASE) && defined(CFG_CS7_MASK) && defined(CFG_CS7_CTRL))
+#if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) && defined(CONFIG_SYS_CS7_CTRL))
gpio->par_cs |= GPIO_PAR_CS_CS7;
- fbcs->csar7 = CFG_CS7_BASE;
- fbcs->cscr7 = CFG_CS7_CTRL;
- fbcs->csmr7 = CFG_CS7_MASK;
+ fbcs->csar7 = CONFIG_SYS_CS7_BASE;
+ fbcs->cscr7 = CONFIG_SYS_CS7_CTRL;
+ fbcs->csmr7 = CONFIG_SYS_CS7_MASK;
#endif
#ifdef CONFIG_FSL_I2C
- CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR;
- CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET;
+ CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
+ CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
#endif
icache_enable();
@@ -130,7 +130,7 @@
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CFG_UART_PORT) {
+ switch (CONFIG_SYS_UART_PORT) {
case 0:
gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD);
break;