rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/common/spartan2.c b/common/spartan2.c
index ebac388..f5ba7fc 100644
--- a/common/spartan2.c
+++ b/common/spartan2.c
@@ -32,8 +32,8 @@
#define PRINTF(fmt,args...)
#endif
-#undef CFG_FPGA_CHECK_BUSY
-#undef CFG_FPGA_PROG_FEEDBACK
+#undef CONFIG_SYS_FPGA_CHECK_BUSY
+#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
/* Note: The assumption is that we cannot possibly run fast enough to
* overrun the device (the Slave Parallel mode can free run at 50MHz).
@@ -44,8 +44,8 @@
#define CONFIG_FPGA_DELAY()
#endif
-#ifndef CFG_FPGA_WAIT
-#define CFG_FPGA_WAIT CFG_HZ/100 /* 10 ms */
+#ifndef CONFIG_SYS_FPGA_WAIT
+#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */
#endif
static int Spartan2_sp_load( Xilinx_desc *desc, void *buf, size_t bsize );
@@ -180,7 +180,7 @@
* Continuous Data Loading in Slave Parallel Mode for
* the Spartan-II Family.
*/
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
printf ("Loading FPGA Device %d...\n", cookie);
#endif
/*
@@ -201,7 +201,7 @@
/* Now wait for INIT and BUSY to go high */
do {
CONFIG_FPGA_DELAY ();
- if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for INIT to clear.\n");
(*fn->abort) (cookie); /* abort the burn */
return FPGA_FAIL;
@@ -223,7 +223,7 @@
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
-#ifdef CFG_FPGA_CHECK_BUSY
+#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
ts = get_timer (0); /* get current time */
while ((*fn->busy) (cookie)) {
/* XXX - we should have a check in here somewhere to
@@ -234,7 +234,7 @@
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
- if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for BUSY to clear.\n");
(*fn->abort) (cookie); /* abort the burn */
return FPGA_FAIL;
@@ -242,7 +242,7 @@
}
#endif
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (bytecount % (bsize / 40) == 0)
putc ('.'); /* let them know we are alive */
#endif
@@ -252,7 +252,7 @@
(*fn->cs) (FALSE, TRUE, cookie); /* Deassert the chip select */
(*fn->wr) (FALSE, TRUE, cookie); /* Deassert the write pin */
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n'); /* terminate the dotted line */
#endif
@@ -268,7 +268,7 @@
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
- if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for DONE to clear.\n");
(*fn->abort) (cookie); /* abort the burn */
ret_val = FPGA_FAIL;
@@ -277,7 +277,7 @@
}
if (ret_val == FPGA_SUCCESS) {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
puts ("Done.\n");
#endif
}
@@ -289,7 +289,7 @@
}
else {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
puts ("Fail.\n");
#endif
}
@@ -323,7 +323,7 @@
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->rdata) (&(data[bytecount++]), cookie); /* read the data */
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (bytecount % (bsize / 40) == 0)
putc ('.'); /* let them know we are alive */
#endif
@@ -333,7 +333,7 @@
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n'); /* terminate the dotted line */
#endif
puts ("Done.\n");
@@ -460,7 +460,7 @@
"done:\t0x%p\n\n",
__FUNCTION__, &fn, fn, fn->pgm, fn->init,
fn->clk, fn->wr, fn->done);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
printf ("Loading FPGA Device %d...\n", cookie);
#endif
@@ -478,7 +478,7 @@
ts = get_timer (0); /* get current time */
do {
CONFIG_FPGA_DELAY ();
- if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for INIT to start.\n");
return FPGA_FAIL;
}
@@ -492,7 +492,7 @@
/* Now wait for INIT to go high */
do {
CONFIG_FPGA_DELAY ();
- if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for INIT to clear.\n");
return FPGA_FAIL;
}
@@ -523,7 +523,7 @@
i --;
} while (i > 0);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (bytecount % (bsize / 40) == 0)
putc ('.'); /* let them know we are alive */
#endif
@@ -531,7 +531,7 @@
CONFIG_FPGA_DELAY ();
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n'); /* terminate the dotted line */
#endif
@@ -551,7 +551,7 @@
putc ('*');
- if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for DONE to clear.\n");
ret_val = FPGA_FAIL;
break;
@@ -566,7 +566,7 @@
(*fn->post) (cookie);
}
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (ret_val == FPGA_SUCCESS) {
puts ("Done.\n");
}