rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c
index 7f22935..895fb2b 100644
--- a/board/zylonite/nand.c
+++ b/board/zylonite/nand.c
@@ -28,19 +28,19 @@
#include <nand.h>
#include <asm/arch/pxa-regs.h>
-#ifdef CFG_DFC_DEBUG1
+#ifdef CONFIG_SYS_DFC_DEBUG1
# define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
#else
# define DFC_DEBUG1(fmt, args...)
#endif
-#ifdef CFG_DFC_DEBUG2
+#ifdef CONFIG_SYS_DFC_DEBUG2
# define DFC_DEBUG2(fmt, args...) printf(fmt, ##args)
#else
# define DFC_DEBUG2(fmt, args...)
#endif
-#ifdef CFG_DFC_DEBUG3
+#ifdef CONFIG_SYS_DFC_DEBUG3
# define DFC_DEBUG3(fmt, args...) printf(fmt, ##args)
#else
# define DFC_DEBUG3(fmt, args...)
@@ -211,7 +211,7 @@
static void dfc_clear_nddb(void)
{
NDCR &= ~NDCR_ND_RUN;
- wait_us(CFG_NAND_OTHER_TO);
+ wait_us(CONFIG_SYS_NAND_OTHER_TO);
}
/* wait_event with timeout */
@@ -222,9 +222,9 @@
if(!event)
return 0xff000000;
else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD))
- timeout = CFG_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
+ timeout = CONFIG_SYS_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
else
- timeout = CFG_NAND_OTHER_TO * OSCR_CLK_FREQ;
+ timeout = CONFIG_SYS_NAND_OTHER_TO * OSCR_CLK_FREQ;
while(1) {
ndsr = NDSR;
@@ -247,7 +247,7 @@
int retry = 0;
unsigned long status;
- while(retry++ <= CFG_NAND_SENDCMD_RETRY) {
+ while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) {
/* Clear NDSR */
NDSR = 0xFFF;
@@ -438,8 +438,8 @@
/* turn on the NAND Controller Clock (104 MHz @ D0) */
CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
-#undef CFG_TIMING_TIGHT
-#ifndef CFG_TIMING_TIGHT
+#undef CONFIG_SYS_TIMING_TIGHT
+#ifndef CONFIG_SYS_TIMING_TIGHT
tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
DFC_MAX_tCH);
tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
@@ -478,7 +478,7 @@
DFC_MAX_tWHR);
tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2),
DFC_MAX_tAR);
-#endif /* CFG_TIMING_TIGHT */
+#endif /* CONFIG_SYS_TIMING_TIGHT */
DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);