rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/zpc1900/zpc1900.c b/board/zpc1900/zpc1900.c
index 103ef71..027d566 100644
--- a/board/zpc1900/zpc1900.c
+++ b/board/zpc1900/zpc1900.c
@@ -183,7 +183,7 @@
}
};
-#ifdef CFG_NVRAM_ACCESS_ROUTINE
+#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE
void *nvram_read(void *dest, long src, size_t count)
{
return memcpy(dest, (const void *)src, count);
@@ -191,8 +191,8 @@
void nvram_write(long dest, const void *src, size_t count)
{
- vu_char *p1 = (vu_char *)(CFG_EEPROM + 0x1555);
- vu_char *p2 = (vu_char *)(CFG_EEPROM + 0x0AAA);
+ vu_char *p1 = (vu_char *)(CONFIG_SYS_EEPROM + 0x1555);
+ vu_char *p2 = (vu_char *)(CONFIG_SYS_EEPROM + 0x0AAA);
vu_char *d = (vu_char *)dest;
const uchar *s = (const uchar *)src;
@@ -218,16 +218,16 @@
*p1 = 0xA0;
udelay(10000);
}
-#endif /* CFG_NVRAM_ACCESS_ROUTINE */
+#endif /* CONFIG_SYS_NVRAM_ACCESS_ROUTINE */
phys_size_t initdram(int board_type)
{
- vu_char *bcsr = (vu_char *)CFG_BCSR;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
vu_char *ramaddr;
uchar c = 0xFF;
- long int msize = CFG_SDRAM_SIZE;
+ long int msize = CONFIG_SYS_SDRAM_SIZE;
int i;
if (bcsr[4] & BCSR_PCI_MODE) { /* PCI mode selected by JP9 */
@@ -237,38 +237,38 @@
| SIUMCR_LBPC01;
}
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
immap->im_siu_conf.sc_ppc_acr = 0x03;
immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
immap->im_siu_conf.sc_tescr1 = 0x00004000;
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-#ifdef CFG_LSDRAM_BASE
+#ifdef CONFIG_SYS_LSDRAM_BASE
/*
Initialise local bus SDRAM only if the pins
are configured as local bus pins and not as PCI.
*/
if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
- memctl->memc_lsrt = CFG_LSRT;
- memctl->memc_or4 = CFG_LSDRAM_OR;
- memctl->memc_br4 = CFG_LSDRAM_BR;
- ramaddr = (vu_char *)CFG_LSDRAM_BASE;
- memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_PREA;
+ memctl->memc_lsrt = CONFIG_SYS_LSRT;
+ memctl->memc_or4 = CONFIG_SYS_LSDRAM_OR;
+ memctl->memc_br4 = CONFIG_SYS_LSDRAM_BR;
+ ramaddr = (vu_char *)CONFIG_SYS_LSDRAM_BASE;
+ memctl->memc_lsdmr = CONFIG_SYS_LSDMR | PSDMR_OP_PREA;
*ramaddr = c;
- memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_CBRR;
+ memctl->memc_lsdmr = CONFIG_SYS_LSDMR | PSDMR_OP_CBRR;
for (i = 0; i < 8; i++)
*ramaddr = c;
- memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_MRW;
+ memctl->memc_lsdmr = CONFIG_SYS_LSDMR | PSDMR_OP_MRW;
*ramaddr = c;
- memctl->memc_lsdmr = CFG_LSDMR | PSDMR_RFEN;
+ memctl->memc_lsdmr = CONFIG_SYS_LSDMR | PSDMR_RFEN;
}
-#endif /* CFG_LSDRAM_BASE */
+#endif /* CONFIG_SYS_LSDRAM_BASE */
/* Initialise 60x bus SDRAM */
- memctl->memc_psrt = CFG_PSRT;
- memctl->memc_or2 = CFG_PSDRAM_OR;
- memctl->memc_br2 = CFG_PSDRAM_BR;
+ memctl->memc_psrt = CONFIG_SYS_PSRT;
+ memctl->memc_or2 = CONFIG_SYS_PSDRAM_OR;
+ memctl->memc_br2 = CONFIG_SYS_PSDRAM_BR;
/*
* The mode data for Mode Register Write command must appear on
* the address lines during a mode-set cycle. It is driven by
@@ -278,18 +278,18 @@
* the address lines. BL=0 because for 64-bit port size burst
* length must be 4.
*/
- ramaddr = (vu_char *)(CFG_SDRAM_BASE |
- ((CFG_PSDMR & PSDMR_CL_MSK) << 7) | 0x10);
- memctl->memc_psdmr = CFG_PSDMR | PSDMR_OP_PREA; /* Precharge all banks */
+ ramaddr = (vu_char *)(CONFIG_SYS_SDRAM_BASE |
+ ((CONFIG_SYS_PSDMR & PSDMR_CL_MSK) << 7) | 0x10);
+ memctl->memc_psdmr = CONFIG_SYS_PSDMR | PSDMR_OP_PREA; /* Precharge all banks */
*ramaddr = c;
- memctl->memc_psdmr = CFG_PSDMR | PSDMR_OP_CBRR; /* CBR refresh */
+ memctl->memc_psdmr = CONFIG_SYS_PSDMR | PSDMR_OP_CBRR; /* CBR refresh */
for (i = 0; i < 8; i++)
*ramaddr = c;
- memctl->memc_psdmr = CFG_PSDMR | PSDMR_OP_MRW; /* Mode Register write */
+ memctl->memc_psdmr = CONFIG_SYS_PSDMR | PSDMR_OP_MRW; /* Mode Register write */
*ramaddr = c;
- memctl->memc_psdmr = CFG_PSDMR | PSDMR_RFEN; /* Refresh enable */
+ memctl->memc_psdmr = CONFIG_SYS_PSDMR | PSDMR_RFEN; /* Refresh enable */
*ramaddr = c;
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
/* Return total 60x bus SDRAM size */
return msize * 1024 * 1024;
@@ -297,7 +297,7 @@
int checkboard(void)
{
- vu_char *bcsr = (vu_char *)CFG_BCSR;
+ vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
printf("Board: Zephyr ZPC.1900 Rev. %c\n", bcsr[2] + 0x40);
return 0;