rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/pleb2/flash.c b/board/pleb2/flash.c
index 3f01921..abaf0b4 100644
--- a/board/pleb2/flash.c
+++ b/board/pleb2/flash.c
@@ -28,7 +28,7 @@
  */
 #include <environment.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
  *        has nothing to do with the flash chip being 8-bit or 16-bit.
@@ -59,7 +59,7 @@
 static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data);
 static void flash_get_offsets (ulong base, flash_info_t * info);
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 static void flash_sync_real_protect (flash_info_t * info);
 #endif
 
@@ -74,11 +74,11 @@
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	size_b = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]);
+	size_b = flash_get_size ((FPW *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size_b;
 
@@ -90,20 +90,20 @@
 	/* Do this again (was done already in flast_get_size), just
 	 * in case we move it when remap the FLASH.
 	 */
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 	/* read the hardware protection status (if any) into the
 	 * protection array in flash_info.
 	 */
 	flash_sync_real_protect (&flash_info[0]);
 #endif
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 #endif
 
@@ -418,7 +418,7 @@
 	return (info->size);
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 
@@ -559,7 +559,7 @@
 
 		while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
 			if ((now =
-			     get_timer_masked ()) > CFG_FLASH_ERASE_TOUT) {
+			     get_timer_masked ()) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 
 				if (intel) {
@@ -573,7 +573,7 @@
 			}
 
 			/* show that we're waiting */
-			if ((now - last) > 1 * CFG_HZ) {	/* every second */
+			if ((now - last) > 1 * CONFIG_SYS_HZ) {	/* every second */
 				putc ('.');
 				last = now;
 			}
@@ -609,7 +609,7 @@
 		/* combine source and destination data so can program
 		 * an entire word of 16 or 32 bits
 		 */
-#ifdef CFG_LITTLE_ENDIAN
+#ifdef CONFIG_SYS_LITTLE_ENDIAN
 		for (i = 0; i < sizeof (data); i++) {
 			data >>= 8;
 			if (i < bytes || i - bytes >= left)
@@ -688,7 +688,7 @@
 	/* data polling for D7 */
 	while (res == 0
 	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW) 0x00F000F0;	/* reset bank */
 			res = 1;
 		}
@@ -733,7 +733,7 @@
 	reset_timer_masked ();
 
 	while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW) 0x00B000B0;	/* Suspend program      */
 			res = 1;
 		}
@@ -748,7 +748,7 @@
 	return (res);
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 int flash_real_protect (flash_info_t * info, long sector, int prot)
diff --git a/board/pleb2/lowlevel_init.S b/board/pleb2/lowlevel_init.S
index add2c53..b95ff9c 100644
--- a/board/pleb2/lowlevel_init.S
+++ b/board/pleb2/lowlevel_init.S
@@ -24,7 +24,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
 	.macro CPWAIT reg
@@ -41,92 +41,92 @@
 	/* Set up GPIO pins first */
 
 	ldr	r0,   =GPSR0
-	ldr	r1,   =CFG_GPSR0_VAL
+	ldr	r1,   =CONFIG_SYS_GPSR0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPSR1
-	ldr	r1,   =CFG_GPSR1_VAL
+	ldr	r1,   =CONFIG_SYS_GPSR1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPSR2
-	ldr	r1,   =CFG_GPSR2_VAL
+	ldr	r1,   =CONFIG_SYS_GPSR2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPCR0
-	ldr	r1,   =CFG_GPCR0_VAL
+	ldr	r1,   =CONFIG_SYS_GPCR0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPCR1
-	ldr	r1,   =CFG_GPCR1_VAL
+	ldr	r1,   =CONFIG_SYS_GPCR1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPCR2
-	ldr	r1,   =CFG_GPCR2_VAL
+	ldr	r1,   =CONFIG_SYS_GPCR2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GRER0
-	ldr	r1,   =CFG_GRER0_VAL
+	ldr	r1,   =CONFIG_SYS_GRER0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GRER1
-	ldr	r1,   =CFG_GRER1_VAL
+	ldr	r1,   =CONFIG_SYS_GRER1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GRER2
-	ldr	r1,   =CFG_GRER2_VAL
+	ldr	r1,   =CONFIG_SYS_GRER2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GFER0
-	ldr	r1,   =CFG_GFER0_VAL
+	ldr	r1,   =CONFIG_SYS_GFER0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GFER1
-	ldr	r1,   =CFG_GFER1_VAL
+	ldr	r1,   =CONFIG_SYS_GFER1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GFER2
-	ldr	r1,   =CFG_GFER2_VAL
+	ldr	r1,   =CONFIG_SYS_GFER2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPDR0
-	ldr	r1,   =CFG_GPDR0_VAL
+	ldr	r1,   =CONFIG_SYS_GPDR0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPDR1
-	ldr	r1,   =CFG_GPDR1_VAL
+	ldr	r1,   =CONFIG_SYS_GPDR1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPDR2
-	ldr	r1,   =CFG_GPDR2_VAL
+	ldr	r1,   =CONFIG_SYS_GPDR2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR0_L
-	ldr	r1,   =CFG_GAFR0_L_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR0_L_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR0_U
-	ldr	r1,   =CFG_GAFR0_U_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR0_U_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR1_L
-	ldr	r1,   =CFG_GAFR1_L_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR1_L_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR1_U
-	ldr	r1,   =CFG_GAFR1_U_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR1_U_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR2_L
-	ldr	r1,   =CFG_GAFR2_L_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR2_L_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR2_U
-	ldr	r1,   =CFG_GAFR2_U_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR2_U_VAL
 	str	r1,   [r0]
 
 	/* enable GPIO pins */
 	ldr	r0,   =PSSR
-	ldr	r1,   =CFG_PSSR_VAL
+	ldr	r1,   =CONFIG_SYS_PSSR_VAL
 	str	r1,   [r0]
 
 
@@ -161,61 +161,61 @@
 	@ Step 2a
 	@ write msc0, read back to ensure data latches
 	@
-	ldr	r2,   =CFG_MSC0_VAL
+	ldr	r2,   =CONFIG_SYS_MSC0_VAL
 	str	r2,   [r1, #MSC0_OFFSET]
 	ldr	r2,   [r1, #MSC0_OFFSET]
 
 	@ write msc1
-	ldr	r2,  =CFG_MSC1_VAL
+	ldr	r2,  =CONFIG_SYS_MSC1_VAL
 	str	r2,  [r1, #MSC1_OFFSET]
 	ldr	r2,  [r1, #MSC1_OFFSET]
 
 	@ write msc2
-	ldr	r2,  =CFG_MSC2_VAL
+	ldr	r2,  =CONFIG_SYS_MSC2_VAL
 	str	r2,  [r1, #MSC2_OFFSET]
 	ldr	r2,  [r1, #MSC2_OFFSET]
 
 
 @ Step 2b
 	@ write mecr
-	ldr	r2,  =CFG_MECR_VAL
+	ldr	r2,  =CONFIG_SYS_MECR_VAL
 	str	r2,  [r1, #MECR_OFFSET]
 
 	@ write mcmem0
-	ldr	r2,  =CFG_MCMEM0_VAL
+	ldr	r2,  =CONFIG_SYS_MCMEM0_VAL
 	str	r2,  [r1, #MCMEM0_OFFSET]
 
 	@ write mcmem1
-	ldr	r2,  =CFG_MCMEM1_VAL
+	ldr	r2,  =CONFIG_SYS_MCMEM1_VAL
 	str	r2,  [r1, #MCMEM1_OFFSET]
 
 	@ write mcatt0
-	ldr	r2,  =CFG_MCATT0_VAL
+	ldr	r2,  =CONFIG_SYS_MCATT0_VAL
 	str	r2,  [r1, #MCATT0_OFFSET]
 
 	@ write mcatt1
-	ldr	r2,  =CFG_MCATT1_VAL
+	ldr	r2,  =CONFIG_SYS_MCATT1_VAL
 	str	r2,  [r1, #MCATT1_OFFSET]
 
 	@ write mcio0
-	ldr	r2,  =CFG_MCIO0_VAL
+	ldr	r2,  =CONFIG_SYS_MCIO0_VAL
 	str	r2,  [r1, #MCIO0_OFFSET]
 
 	@ write mcio1
-	ldr	r2,  =CFG_MCIO1_VAL
+	ldr	r2,  =CONFIG_SYS_MCIO1_VAL
 	str	r2,  [r1, #MCIO1_OFFSET]
 
 @ Step 2c
 	@ fly-by-dma is defeatured on this part
 	@ write flycnfg
-	@ldr	r2,  =CFG_FLYCNFG_VAL
+	@ldr	r2,  =CONFIG_SYS_FLYCNFG_VAL
 	@str	r2,  [r1, #FLYCNFG_OFFSET]
 
 /* FIXME Does this sequence really make sense */
 #ifdef REDBOOT_WAY
 	@ Step 2d
 	@ get the mdrefr settings
-	ldr	r3,  =CFG_MDREFR_VAL
+	ldr	r3,  =CONFIG_SYS_MDREFR_VAL
 
 	@ extract DRI field (we need a valid DRI field)
 	@
@@ -296,7 +296,7 @@
 #else
 	@ Step 2d
 	@ get the mdrefr settings
-	ldr	r3,  =CFG_MDREFR_VAL
+	ldr	r3,  =CONFIG_SYS_MDREFR_VAL
 
 	@ write back mdrefr
 	@
@@ -340,7 +340,7 @@
 	@ Step 4d
 	@ fetch platform value of mdcnfg
 	@
-	ldr	r2,  =CFG_MDCNFG_VAL
+	ldr	r2,  =CONFIG_SYS_MDCNFG_VAL
 
 	@ disable all sdram banks
 	@
@@ -375,7 +375,7 @@
 	@ Access memory *not yet enabled* for CBR refresh cycles (8)
 	@ - CBR is generated for all banks
 
-	ldr	r2, =CFG_DRAM_BASE
+	ldr	r2, =CONFIG_SYS_DRAM_BASE
 	str	r2, [r2]
 	str	r2, [r2]
 	str	r2, [r2]
@@ -405,7 +405,7 @@
 	@ Step 4h
 	@ write mdmrs
 	@
-	ldr	r2,  =CFG_MDMRS_VAL
+	ldr	r2,  =CONFIG_SYS_MDMRS_VAL
 	str	r2,  [r1, #MDMRS_OFFSET]
 
 	@ Done Memory Init
@@ -424,7 +424,7 @@
 
 	@ Set interrupt mask register
 	@
-	ldr	r1,  =CFG_ICMR_VAL
+	ldr	r1,  =CONFIG_SYS_ICMR_VAL
 	ldr	r2,  =ICMR
 	str	r1,  [r2]
 
@@ -440,7 +440,7 @@
 
 	@ set core clocks
 	@
-	ldr	r2,  =CFG_CCCR_VAL
+	ldr	r2,  =CONFIG_SYS_CCCR_VAL
 	ldr	r1,  =CCCR
 	str	r2,  [r1]
 
@@ -463,7 +463,7 @@
 	@ Turn on needed clocks
 	@
 	ldr	r1,  =CKEN
-	ldr	r2,  =CFG_CKEN_VAL
+	ldr	r2,  =CONFIG_SYS_CKEN_VAL
 	str	r2,  [r1]
 
 	/*SET_LED 7 */