rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/mpc8540eval/flash.c b/board/mpc8540eval/flash.c
index 98fd168..9df5bd9 100644
--- a/board/mpc8540eval/flash.c
+++ b/board/mpc8540eval/flash.c
@@ -31,13 +31,13 @@
#include <common.h>
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
@@ -74,7 +74,7 @@
/* Init: enable write,
* or we cannot even write flash commands
*/
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
/* set the default sector offset */
@@ -82,7 +82,7 @@
/* Static FLASH Bank configuration here - FIXME XXX */
- size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+ size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -90,16 +90,16 @@
}
/* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+ size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
flash_info[0].size = size;
#if !defined(CONFIG_RAM_AS_FLASH)
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -177,8 +177,8 @@
udelay(20);
asm("sync");
-#ifndef CFG_FLASH_CFI
- printf("Not define CFG_FLASH_CFI\n");
+#ifndef CONFIG_SYS_FLASH_CFI
+ printf("Not define CONFIG_SYS_FLASH_CFI\n");
return (0);
#else
value = addr[0];
@@ -237,7 +237,7 @@
break;
}
#endif
-#endif /*#ifdef CFG_FLASH_CFI*/
+#endif /*#ifdef CONFIG_SYS_FLASH_CFI*/
if (big_endian==0) value = (addr[0] & 0xFF000000) >>8;
else value = (addr[0] & 0x00FF0000);
@@ -453,7 +453,7 @@
asm("sync");
return 1;
}
- if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr16 = 0xFFFF; /* reset bank */
asm("sync");
@@ -505,7 +505,7 @@
asm("sync");
return 1;
}
- if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0xFFFFFFFF; /* reset bank */
asm("sync");
@@ -693,7 +693,7 @@
/* data polling for D7 */
flag = 0;
while (((csr = *addr) & ready) != ready) {
- if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) {
flag = 1;
break;
}
@@ -751,7 +751,7 @@
/* data polling for D7 */
flag = 0;
while (((csr = *addr) & ready) != ready) {
- if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) {
flag = 1;
break;
}
@@ -815,7 +815,7 @@
start = get_timer (0);
flag = 0;
while (((csr = *addr) & ready) != ready) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
flag = 1;
break;
}
@@ -881,7 +881,7 @@
*addr = 0x70707070; /* read status */
start = get_timer (0);
while((*addr & ready) != ready){
- if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout on clearing Block Lock Bit\n");
*addr = 0xFFFFFFFF; /* reset bank */
asm("sync");
@@ -891,4 +891,4 @@
return 0;
}
-#endif /* !CFG_NO_FLASH */
+#endif /* !CONFIG_SYS_NO_FLASH */