diff --git a/board/eltec/bab7xx/asm_init.S b/board/eltec/bab7xx/asm_init.S
index 2a9b33e..a85fb8b 100644
--- a/board/eltec/bab7xx/asm_init.S
+++ b/board/eltec/bab7xx/asm_init.S
@@ -125,7 +125,7 @@
     lis     r2, 0xfee0
     ori     r2, r2, 0xcfc
 
-#ifdef CFG_ADDRESS_MAP_A
+#ifdef CONFIG_SYS_ADDRESS_MAP_A
 /*
  * Switch to address map A if necessary.
  */
@@ -835,17 +835,17 @@
 /*
  * Get base addr of ISA I/O space
  */
-    lis     r6, CFG_ISA_IO@h
-    ori     r6, r6, CFG_ISA_IO@l
+    lis     r6, CONFIG_SYS_ISA_IO@h
+    ori     r6, r6, CONFIG_SYS_ISA_IO@l
 
 /*
  * Set offset to base address for config registers.
  */
-#if defined(CFG_NS87308_BADDR_0x)
+#if defined(CONFIG_SYS_NS87308_BADDR_0x)
     addi    r4, r0, 0x0279
-#elif defined(CFG_NS87308_BADDR_10)
+#elif defined(CONFIG_SYS_NS87308_BADDR_10)
     addi    r4, r0, 0x015C
-#elif defined(CFG_NS87308_BADDR_11)
+#elif defined(CONFIG_SYS_NS87308_BADDR_11)
     addi    r4, r0, 0x002E
 #endif
     add     r6, r6, r4          /* add offset to base */
@@ -867,7 +867,7 @@
     addi    r5, r0, SIO_LUNENABLE
     bl      .sio_bw
 
-    lis     r8, CFG_ISA_IO@h
+    lis     r8, CONFIG_SYS_ISA_IO@h
     ori     r8, r8, 0x0460
     li      r9, 0x03
     stb     r9, 0(r8)               /* select PMC2 register */
@@ -898,7 +898,7 @@
 /*
  * Init COM1 for polled output
  */
-    lis     r8, CFG_ISA_IO@h
+    lis     r8, CONFIG_SYS_ISA_IO@h
     ori     r8, r8, 0x03f8
     li      r9, 0x00
     stb     r9, 1(r8)           /* int disabled */
@@ -972,8 +972,8 @@
 /*
  * Get base addr of ISA I/O space
  */
-    lis     r3, CFG_ISA_IO@h
-    ori     r3, r3, CFG_ISA_IO@l
+    lis     r3, CONFIG_SYS_ISA_IO@h
+    ori     r3, r3, CONFIG_SYS_ISA_IO@l
 
     addi    r3, r3, 0x015C      /* adjust to superI/O 87308 base */
     or      r6, r3, r3          /* make a copy */
@@ -1076,7 +1076,7 @@
  */
 .globl Printf
 Printf:
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 
 WaitChr:
@@ -1107,7 +1107,7 @@
 OutHex:
     li      r9, 28              /* shift reg for 8 digits */
 OHstart:
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 OutDig:
     lbz     r0, 5(r10)          /* read link status */
@@ -1149,7 +1149,7 @@
     mullw   r10, r0, r6
     subf    r7, r10, r3
 
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 
     or.     r7, r7, r7
@@ -1198,7 +1198,7 @@
  */
 .globl    OutChr
 OutChr:
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 
 OutChr1:
@@ -1216,7 +1216,7 @@
 spdRead:
     mfspr   r26, 8              /* save link register */
 
-    lis     r30, CFG_ISA_IO@h
+    lis     r30, CONFIG_SYS_ISA_IO@h
     ori     r30, r30, 0x220     /* GPIO Port 1 */
     li      r7, 0x00
     li      r8, 0x100
diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c
index 8c56116..1f78f8d 100644
--- a/board/eltec/bab7xx/bab7xx.c
+++ b/board/eltec/bab7xx/bab7xx.c
@@ -44,7 +44,7 @@
 	 * The GPIO Port 1 on BAB7xx reflects the bus speed.
 	 */
 	volatile struct GPIO *gpio =
-		(struct GPIO *) (CFG_ISA_IO + CFG_NS87308_GPIO_BASE);
+		(struct GPIO *) (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_GPIO_BASE);
 
 	unsigned char data = gpio->dta1;
 
@@ -87,7 +87,7 @@
 
 int checkboard (void)
 {
-#ifdef CFG_ADDRESS_MAP_A
+#ifdef CONFIG_SYS_ADDRESS_MAP_A
 	puts ("Board: ELTEC BAB7xx PReP\n");
 #else
 	puts ("Board: ELTEC BAB7xx CHRP\n");
@@ -126,16 +126,16 @@
 
 	register unsigned long i, msar1, mear1, memSize;
 
-#if defined(CFG_MEMTEST)
+#if defined(CONFIG_SYS_MEMTEST)
 	register unsigned long reg;
 
 	printf ("Testing DRAM\n");
 
 	/* write each mem addr with it's address */
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4)
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4)
 		*reg = reg;
 
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) {
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) {
 		if (*reg != reg)
 			return -1;
 	}
diff --git a/board/eltec/bab7xx/flash.c b/board/eltec/bab7xx/flash.c
index 442dd00..21ae098 100644
--- a/board/eltec/bab7xx/flash.c
+++ b/board/eltec/bab7xx/flash.c
@@ -34,7 +34,7 @@
 #include <asm/processor.h>
 #include <asm/pci_io.h>
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size (vu_long *addr, flash_info_t *info);
 static int write_word (flash_info_t *info, ulong dest, ulong data);
@@ -55,7 +55,7 @@
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
     {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
@@ -96,8 +96,8 @@
     if (size2 == 4*1024*1024)
     {
 	(void)flash_protect(FLAG_PROTECT_SET,
-		CFG_FLASH_BASE,
-		CFG_FLASH_BASE+monitor_flash_len-1,
+		CONFIG_SYS_FLASH_BASE,
+		CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 		&flash_info[1]);
     }
 
@@ -370,7 +370,7 @@
     last  = start;
     addr = (FLASH_WORD_SIZE *)(info->start[l_sect]);
     while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -500,7 +500,7 @@
 	    start = get_timer (0);
 	    while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
 		   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/eltec/bab7xx/l2cache.c b/board/eltec/bab7xx/l2cache.c
index 1e75377..787704f 100644
--- a/board/eltec/bab7xx/l2cache.c
+++ b/board/eltec/bab7xx/l2cache.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CFG_L2_BAB7xx)
+#if defined(CONFIG_SYS_L2_BAB7xx)
 
 #include <pci.h>
 #include <mpc106.h>
@@ -77,7 +77,7 @@
 	pci_write_config_dword (devbusfn, PCI_PICR2, reg32);
 
 	/* cache size */
-	if (*(volatile unsigned char *) (CFG_ISA_IO + 0x220) & 0x04)
+	if (*(volatile unsigned char *) (CONFIG_SYS_ISA_IO + 0x220) & 0x04)
 	{
 	    /* cache size is 512 KB */
 	    picr2CacheSize = PICR2_L2_SIZE_512K;
@@ -156,4 +156,4 @@
 
 /*----------------------------------------------------------------------------*/
 
-#endif /* (CFG_L2_BAB7xx) */
+#endif /* (CONFIG_SYS_L2_BAB7xx) */
diff --git a/board/eltec/bab7xx/misc.c b/board/eltec/bab7xx/misc.c
index 6a24807..1c94a76 100644
--- a/board/eltec/bab7xx/misc.c
+++ b/board/eltec/bab7xx/misc.c
@@ -31,7 +31,7 @@
 #include "srom.h"
 
 /* imports  */
-extern char console_buffer[CFG_CBSIZE];
+extern char console_buffer[CONFIG_SYS_CBSIZE];
 extern int l2_cache_enable (int l2control);
 extern void *nvram_read (void *dest, const short src, size_t count);
 extern void nvram_write (short dest, const void *src, size_t count);
@@ -134,7 +134,7 @@
 		SECOND_DEVICE, FIRST_BLOCK);
 
     /* read out current nvram shadow image */
-    nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
+    nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE);
 
     if (strcmp (eerev.magic, "ELTEC") != 0)
     {
@@ -162,8 +162,8 @@
 	copyNv   = 1;  /* copy to nvram */
     }
 
-    if ((copyNv == 0) &&   (el_srom_checksum((u_char*)&eerev, CFG_SROM_SIZE) !=
-		el_srom_checksum((u_char*)buf, CFG_SROM_SIZE)))
+    if ((copyNv == 0) &&   (el_srom_checksum((u_char*)&eerev, CONFIG_SYS_SROM_SIZE) !=
+		el_srom_checksum((u_char*)buf, CONFIG_SYS_SROM_SIZE)))
     {
 	printf ("Invalid revision info copy in nvram !\n");
 	printf ("Press key:\n  <c> to copy current revision info to nvram.\n");
@@ -304,13 +304,13 @@
 	    printf("OK\n\n");
 
 	/* write new values as shadow image to nvram */
-	nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
+	nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE);
 
     } /*if (initSrom) */
 
     /* copy current values as shadow image to nvram */
     if (initSrom == 0 && copyNv == 1)
-	nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
+	nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE);
 
     /* update environment */
     sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
@@ -333,7 +333,7 @@
    /*
     * L2 cache configuration
     */
-#if defined(CFG_L2_BAB7xx)
+#if defined(CONFIG_SYS_L2_BAB7xx)
     ptr = getenv("l2cache");
     if (*ptr == '0')
     {
diff --git a/board/eltec/bab7xx/pci.c b/board/eltec/bab7xx/pci.c
index edbd3dd..46e5a8b 100644
--- a/board/eltec/bab7xx/pci.c
+++ b/board/eltec/bab7xx/pci.c
@@ -43,41 +43,41 @@
     hose->last_busno = 0xff;
 
     pci_set_region(hose->regions + 0,
-	CFG_PCI_MEMORY_BUS,
-	CFG_PCI_MEMORY_PHYS,
+	CONFIG_SYS_PCI_MEMORY_BUS,
+	CONFIG_SYS_PCI_MEMORY_PHYS,
     /*
     * Attention: pci_hose_phys_to_bus() failes in address compare,
-    * so we need (CFG_PCI_MEMORY_SIZE-1)
+    * so we need (CONFIG_SYS_PCI_MEMORY_SIZE-1)
     */
-	CFG_PCI_MEMORY_SIZE-1,
+	CONFIG_SYS_PCI_MEMORY_SIZE-1,
 	PCI_REGION_MEM | PCI_REGION_MEMORY);
 
     /* PCI memory space */
     pci_set_region(hose->regions + 1,
-	CFG_PCI_MEM_BUS,
-	CFG_PCI_MEM_PHYS,
-	CFG_PCI_MEM_SIZE,
+	CONFIG_SYS_PCI_MEM_BUS,
+	CONFIG_SYS_PCI_MEM_PHYS,
+	CONFIG_SYS_PCI_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* ISA/PCI memory space */
     pci_set_region(hose->regions + 2,
-	CFG_ISA_MEM_BUS,
-	CFG_ISA_MEM_PHYS,
-	CFG_ISA_MEM_SIZE,
+	CONFIG_SYS_ISA_MEM_BUS,
+	CONFIG_SYS_ISA_MEM_PHYS,
+	CONFIG_SYS_ISA_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* PCI I/O space */
     pci_set_region(hose->regions + 3,
-	CFG_PCI_IO_BUS,
-	CFG_PCI_IO_PHYS,
-	CFG_PCI_IO_SIZE,
+	CONFIG_SYS_PCI_IO_BUS,
+	CONFIG_SYS_PCI_IO_PHYS,
+	CONFIG_SYS_PCI_IO_SIZE,
 	PCI_REGION_IO);
 
     /* ISA/PCI I/O space */
     pci_set_region(hose->regions + 4,
-	CFG_ISA_IO_BUS,
-	CFG_ISA_IO_PHYS,
-	CFG_ISA_IO_SIZE,
+	CONFIG_SYS_ISA_IO_BUS,
+	CONFIG_SYS_ISA_IO_PHYS,
+	CONFIG_SYS_ISA_IO_SIZE,
 	PCI_REGION_IO);
 
     hose->region_count = 5;
diff --git a/board/eltec/bab7xx/srom.h b/board/eltec/bab7xx/srom.h
index c18ab91..504b742 100644
--- a/board/eltec/bab7xx/srom.h
+++ b/board/eltec/bab7xx/srom.h
@@ -40,8 +40,8 @@
 #define SROM_SHORT(pX)          (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8)
 
 /* bab7xx ELTEC srom */
-#define I2C_BUS_DAT             (CFG_ISA_IO + 0x220)
-#define I2C_BUS_DIR             (CFG_ISA_IO + 0x221)
+#define I2C_BUS_DAT             (CONFIG_SYS_ISA_IO + 0x220)
+#define I2C_BUS_DIR             (CONFIG_SYS_ISA_IO + 0x221)
 
 /* srom at mpc107 */
 #define MPC107_I2CADDR          (mpc107_eumb_addr + 0x3000)     /* address      */