rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/board/Marvell/common/flash.c b/board/Marvell/common/flash.c
index 3603372..21eae0e 100644
--- a/board/Marvell/common/flash.c
+++ b/board/Marvell/common/flash.c
@@ -48,7 +48,7 @@
int flash_erase_intel (flash_info_t * info, int s_first, int s_last);
int write_word_intel (bank_addr_t addr, bank_word_t value);
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -68,14 +68,14 @@
unsigned long base, flash_size;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* the boot flash */
- base = CFG_FLASH_BASE;
+ base = CONFIG_SYS_FLASH_BASE;
size_b0 =
- flash_get_size (CFG_BOOT_FLASH_WIDTH, (vu_long *) base,
+ flash_get_size (CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *) base,
&flash_info[0]);
printf ("[%ldkB@%lx] ", size_b0 / 1024, base);
@@ -84,11 +84,11 @@
printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b0, size_b0 << 20);
}
- base = memoryGetDeviceBaseAddress (CFG_EXTRA_FLASH_DEVICE);
+ base = memoryGetDeviceBaseAddress (CONFIG_SYS_EXTRA_FLASH_DEVICE);
/* base = memoryGetDeviceBaseAddress(DEV_CS3_BASE_ADDR);*/
- for (i = 1; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
unsigned long size =
- flash_get_size (CFG_EXTRA_FLASH_WIDTH,
+ flash_get_size (CONFIG_SYS_EXTRA_FLASH_WIDTH,
(vu_long *) base, &flash_info[i]);
printf ("[%ldMB@%lx] ", size >> 20, base);
@@ -617,7 +617,7 @@
/* has the timeout limit been reached? */
if (get_timer (start)
>
- CFG_FLASH_ERASE_TOUT)
+ CONFIG_SYS_FLASH_ERASE_TOUT)
{
/* timeout limit reached */
printf ("Time out limit reached erasing sector at address %08lx\n", info->start[sect]);
@@ -776,7 +776,7 @@
addr = (volatile unsigned char *) (info->start[l_sect]);
/* broken for 2x16: TODO */
while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -956,7 +956,7 @@
{
/* has the timeout limit been reached? */
if (get_timer (start) >
- CFG_FLASH_WRITE_TOUT) {
+ CONFIG_SYS_FLASH_WRITE_TOUT) {
/* timeout limit reached */
printf ("Time out limit reached programming address %08lx with data %08lx\n", dest, data);
/* reset the flash */
@@ -1064,7 +1064,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/Marvell/common/i2c.c b/board/Marvell/common/i2c.c
index 32b2b30..d426044 100644
--- a/board/Marvell/common/i2c.c
+++ b/board/Marvell/common/i2c.c
@@ -48,7 +48,7 @@
unsigned int actualN = 0, actualM = 0;
unsigned int control, status;
unsigned int minMargin = 0xffffffff;
- unsigned int tclk = CFG_TCLK;
+ unsigned int tclk = CONFIG_SYS_TCLK;
unsigned int i2cFreq = speed; /* 100000 max. Fast mode not supported */
DP (puts ("i2c_init\n"));
@@ -372,7 +372,7 @@
int len)
{
uchar status = 0;
- unsigned int i2cFreq = CFG_I2C_SPEED;
+ unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
DP (puts ("i2c_read\n"));
@@ -447,7 +447,7 @@
int len)
{
uchar status = 0;
- unsigned int i2cFreq = CFG_I2C_SPEED;
+ unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
DP (puts ("i2c_write\n"));
@@ -500,7 +500,7 @@
unsigned int i2c_status;
#endif
uchar status = 0;
- unsigned int i2cFreq = CFG_I2C_SPEED;
+ unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
DP (puts ("i2c_probe\n"));
diff --git a/board/Marvell/common/intel_flash.c b/board/Marvell/common/intel_flash.c
index d26f883..42b3ee1 100644
--- a/board/Marvell/common/intel_flash.c
+++ b/board/Marvell/common/intel_flash.c
@@ -152,7 +152,7 @@
/* data polling for D7 */
start = get_timer (0);
do {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
retval = 1;
goto done;
}
@@ -227,7 +227,7 @@
do {
now = get_timer (start);
- if (now - estart > CFG_FLASH_ERASE_TOUT) {
+ if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout (sect %d)\n", sect);
haderr = 1;
break;
diff --git a/board/Marvell/common/intel_flash.h b/board/Marvell/common/intel_flash.h
index 666a4cd..bd8941e 100644
--- a/board/Marvell/common/intel_flash.h
+++ b/board/Marvell/common/intel_flash.h
@@ -68,7 +68,7 @@
/* ID and Lock Configuration */
#define CHIP_RD_ID_LOCK 0x01 /* Bit 0 of each byte */
#define CHIP_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV CFG_FLASH_ID
+#define CHIP_RD_ID_DEV CONFIG_SYS_FLASH_ID
/* dimensions */
#define CHIP_WIDTH 2 /* chips are in 16 bit mode */
diff --git a/board/Marvell/common/misc.S b/board/Marvell/common/misc.S
index 41c3a95..b3a0898 100644
--- a/board/Marvell/common/misc.S
+++ b/board/Marvell/common/misc.S
@@ -16,7 +16,7 @@
board_relocate_rom:
mflr r7
/* update the location of the GT registers */
- lis r11, CFG_GT_REGS@h
+ lis r11, CONFIG_SYS_GT_REGS@h
/* if we're using ECC, we must use the DMA engine to copy ourselves */
bl start_idma_transfer_0
bl wait_for_idma_0
@@ -29,12 +29,12 @@
board_init_ecc:
mflr r7
/* NOTE: r10 still contains the location we've been relocated to
- * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+ * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
/* now that we're running from ram, init the rest of main memory
* for ECC use */
- lis r8, CFG_MONITOR_LEN@h
- ori r8, r8, CFG_MONITOR_LEN@l
+ lis r8, CONFIG_SYS_MONITOR_LEN@h
+ ori r8, r8, CONFIG_SYS_MONITOR_LEN@l
divw r3, r10, r8
@@ -120,15 +120,15 @@
blr
#endif
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
/* NOTE: trashes r3-r7 */
.globl board_asm_init
board_asm_init:
/* just move the GT registers to where they belong */
- lis r3, CFG_DFL_GT_REGS@h
- ori r3, r3, CFG_DFL_GT_REGS@l
- lis r4, CFG_GT_REGS@h
- ori r4, r4, CFG_GT_REGS@l
+ lis r3, CONFIG_SYS_DFL_GT_REGS@h
+ ori r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+ lis r4, CONFIG_SYS_GT_REGS@h
+ ori r4, r4, CONFIG_SYS_GT_REGS@l
li r5, INTERNAL_SPACE_DECODE
/* test to see if we've already moved */
diff --git a/board/Marvell/common/ns16550.c b/board/Marvell/common/ns16550.c
index 475445b..7fbf28a 100644
--- a/board/Marvell/common/ns16550.c
+++ b/board/Marvell/common/ns16550.c
@@ -1,7 +1,7 @@
/*
* COM1 NS16550 support
* originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
*
* further modified by Josh Huber <huber@mclx.com> to support
* the DUART on the Galileo Eval board. (db64360)
@@ -13,8 +13,8 @@
#ifdef ZUMA_NTL
/* no 16550 device */
#else
-const NS16550_t COM_PORTS[] = { (NS16550_t) (CFG_DUART_IO + 0),
- (NS16550_t) (CFG_DUART_IO + 0x20)
+const NS16550_t COM_PORTS[] = { (NS16550_t) (CONFIG_SYS_DUART_IO + 0),
+ (NS16550_t) (CONFIG_SYS_DUART_IO + 0x20)
};
volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
diff --git a/board/Marvell/common/ns16550.h b/board/Marvell/common/ns16550.h
index f2ed2ab..b9691ab 100644
--- a/board/Marvell/common/ns16550.h
+++ b/board/Marvell/common/ns16550.h
@@ -2,7 +2,7 @@
* NS16550 Serial Port
* originally from linux source (arch/ppc/boot/ns16550.h)
* modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
* added a few more definitions
* added prototypes for ns16550.c
* reduced no of com ports to 2
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
index 01efbea..3e7f406 100644
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -52,17 +52,17 @@
int serial_init (void)
{
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
int clock_divisor = 230400 / gd->baudrate;
#endif
mpsc_init (gd->baudrate);
/* init the DUART chans so that KGDB in the kernel can use them */
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
NS16550_reinit (COM_PORTS[0], clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
NS16550_reinit (COM_PORTS[1], clock_divisor);
#endif
return (0);
@@ -97,10 +97,10 @@
{
int clock_divisor = 230400 / gd->baudrate;
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
(void) NS16550_init (0, clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
(void) NS16550_init (1, clock_divisor);
#endif
return (0);
@@ -109,29 +109,29 @@
void serial_putc (const char c)
{
if (c == '\n')
- NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+ NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
- NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+ NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
}
int serial_getc (void)
{
- return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
int serial_tstc (void)
{
- return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
void serial_setbrg (void)
{
int clock_divisor = 230400 / gd->baudrate;
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
NS16550_reinit (COM_PORTS[0], clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
NS16550_reinit (COM_PORTS[1], clock_divisor);
#endif
}