mpc83xx: Introduce ARCH_MPC834*
Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 1b9402e..6cca45e 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -14,6 +14,7 @@
config TARGET_SBC8349
bool "Support sbc8349"
+ select ARCH_MPC8349
config TARGET_VE8313
bool "Support ve8313"
@@ -21,6 +22,7 @@
config TARGET_VME8349
bool "Support vme8349"
+ select ARCH_MPC8349
config TARGET_MPC8308RDB
bool "Support MPC8308RDB"
@@ -49,6 +51,7 @@
config TARGET_MPC8349EMDS
bool "Support MPC8349EMDS"
+ select ARCH_MPC8349
select BOARD_EARLY_INIT_F
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
@@ -56,6 +59,7 @@
config TARGET_MPC8349ITX
bool "Support MPC8349ITX"
+ select ARCH_MPC8349
imply CMD_IRQ
config TARGET_MPC837XEMDS
@@ -96,6 +100,7 @@
config TARGET_TQM834X
bool "Support TQM834x"
+ select ARCH_MPC8349
config TARGET_HRCON
bool "Support hrcon"
@@ -135,6 +140,13 @@
config ARCH_MPC832X
bool
+config ARCH_MPC834X
+ bool
+
+config ARCH_MPC8349
+ bool
+ select ARCH_MPC834X
+
source "board/esd/vme8349/Kconfig"
source "board/freescale/mpc8308rdb/Kconfig"
source "board/freescale/mpc8313erdb/Kconfig"
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index 7d8d551..7c37867 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -240,7 +240,7 @@
/* System General Purpose Register */
#ifdef CONFIG_SYS_SICRH
-#if defined(CONFIG_MPC834x) || defined(CONFIG_ARCH_MPC8313)
+#if defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC8313)
/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
__raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
&im->sysconf.sicrh);
diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
index 3f18aad..b3cbf9f 100644
--- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c
+++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
@@ -426,7 +426,7 @@
/*
* Errata DDR6 work around: input enable 2 cycles earlier.
- * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
+ * including MPC834X Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
*/
if(PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR){
if (caslat == 2)
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index ab025af..7cb6f37 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -86,14 +86,14 @@
u32 csb_clk;
#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
- defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+ defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_MPC837x)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
#elif defined(CONFIG_ARCH_MPC8309)
u32 usbdr_clk;
#endif
-#ifdef CONFIG_MPC834x
+#ifdef CONFIG_ARCH_MPC834X
u32 usbmph_clk;
#endif
u32 core_clk;
@@ -156,7 +156,7 @@
sccr = im->clk.sccr;
#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
- defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+ defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
tsec1_clk = 0;
@@ -177,7 +177,7 @@
#endif
#if defined(CONFIG_ARCH_MPC830X) || defined(CONFIG_ARCH_MPC831X) || \
- defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+ defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
case 0:
usbdr_clk = 0;
@@ -198,7 +198,7 @@
#endif
#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) || \
- defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+ defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
@@ -225,7 +225,7 @@
tsec2_clk = 0;
#endif
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
case 0:
usbmph_clk = 0;
@@ -311,7 +311,7 @@
}
#endif
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
i2c1_clk = tsec2_clk;
#elif defined(CONFIG_MPC8360)
i2c1_clk = csb_clk;
@@ -449,14 +449,14 @@
gd->arch.csb_clk = csb_clk;
#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
- defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+ defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_MPC837x)
gd->arch.tsec1_clk = tsec1_clk;
gd->arch.tsec2_clk = tsec2_clk;
gd->arch.usbdr_clk = usbdr_clk;
#elif defined(CONFIG_ARCH_MPC8309)
gd->arch.usbdr_clk = usbdr_clk;
#endif
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
gd->arch.usbmph_clk = usbmph_clk;
#endif
#if defined(CONFIG_ARCH_MPC8315)
@@ -559,7 +559,7 @@
strmhz(buf, gd->arch.sdhc_clk));
#endif
#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
- defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+ defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_MPC837x)
printf(" TSEC1: %-4s MHz\n",
strmhz(buf, gd->arch.tsec1_clk));
printf(" TSEC2: %-4s MHz\n",
@@ -570,7 +570,7 @@
printf(" USB DR: %-4s MHz\n",
strmhz(buf, gd->arch.usbdr_clk));
#endif
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
printf(" USB MPH: %-4s MHz\n",
strmhz(buf, gd->arch.usbmph_clk));
#endif