MIPS: unify cache initialization code
The mips32 & mips64 cache initialization code differs only in that the
mips32 code supports reading the cache size from coprocessor 0 registers
at runtime. Move the more developed mips32 version to a common
arch/mips/lib/cache_init.S & remove the now-redundant mips64 version in
order to reduce duplication. The temporary registers used are shuffled
slightly in order to work for both mips32 & mips64 builds. The RA
register is defined differently to suit mips32 & mips64, but will be
removed by a later commit in the series after further cleanup.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
diff --git a/arch/mips/cpu/mips32/Makefile b/arch/mips/cpu/mips32/Makefile
index fa82dd3..19d316a 100644
--- a/arch/mips/cpu/mips32/Makefile
+++ b/arch/mips/cpu/mips32/Makefile
@@ -6,7 +6,6 @@
#
extra-y = start.o
-obj-y = cache.o
-obj-y += cpu.o interrupts.o time.o
+obj-y = cpu.o interrupts.o time.o
obj-$(CONFIG_SOC_AU1X00) += au1x00/
diff --git a/arch/mips/cpu/mips64/Makefile b/arch/mips/cpu/mips64/Makefile
index 899c319..cb4db9c 100644
--- a/arch/mips/cpu/mips64/Makefile
+++ b/arch/mips/cpu/mips64/Makefile
@@ -6,4 +6,4 @@
#
extra-y = start.o
-obj-y = cpu.o interrupts.o time.o cache.o
+obj-y = cpu.o interrupts.o time.o
diff --git a/arch/mips/cpu/mips64/cache.S b/arch/mips/cpu/mips64/cache.S
deleted file mode 100644
index 36d8688..0000000
--- a/arch/mips/cpu/mips64/cache.S
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Cache-handling routined for MIPS CPUs
- *
- * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/cacheops.h>
-
-#define RA t9
-
-/*
- * 16kB is the maximum size of instruction and data caches on MIPS 4K,
- * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
- *
- * Note that the above size is the maximum size of primary cache. U-Boot
- * doesn't have L2 cache support for now.
- */
-#define MIPS_MAX_CACHE_SIZE 0x10000
-
-#define INDEX_BASE CKSEG0
-
- .macro cache_op op addr
- .set push
- .set noreorder
- .set mips3
- cache \op, 0(\addr)
- .set pop
- .endm
-
- .macro f_fill64 dst, offset, val
- LONG_S \val, (\offset + 0 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 1 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 2 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 3 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 4 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 5 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 6 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 7 * LONGSIZE)(\dst)
-#if LONGSIZE == 4
- LONG_S \val, (\offset + 8 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 9 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 10 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 11 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 12 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 13 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 14 * LONGSIZE)(\dst)
- LONG_S \val, (\offset + 15 * LONGSIZE)(\dst)
-#endif
- .endm
-
-/*
- * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz)
- */
-LEAF(mips_init_icache)
- blez a1, 9f
- mtc0 zero, CP0_TAGLO
- /* clear tag to invalidate */
- PTR_LI t0, INDEX_BASE
- PTR_ADDU t1, t0, a1
-1: cache_op INDEX_STORE_TAG_I t0
- PTR_ADDU t0, a2
- bne t0, t1, 1b
- /* fill once, so data field parity is correct */
- PTR_LI t0, INDEX_BASE
-2: cache_op FILL t0
- PTR_ADDU t0, a2
- bne t0, t1, 2b
- /* invalidate again - prudent but not strictly neccessary */
- PTR_LI t0, INDEX_BASE
-1: cache_op INDEX_STORE_TAG_I t0
- PTR_ADDU t0, a2
- bne t0, t1, 1b
-9: jr ra
- END(mips_init_icache)
-
-/*
- * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz)
- */
-LEAF(mips_init_dcache)
- blez a1, 9f
- mtc0 zero, CP0_TAGLO
- /* clear all tags */
- PTR_LI t0, INDEX_BASE
- PTR_ADDU t1, t0, a1
-1: cache_op INDEX_STORE_TAG_D t0
- PTR_ADDU t0, a2
- bne t0, t1, 1b
- /* load from each line (in cached space) */
- PTR_LI t0, INDEX_BASE
-2: LONG_L zero, 0(t0)
- PTR_ADDU t0, a2
- bne t0, t1, 2b
- /* clear all tags */
- PTR_LI t0, INDEX_BASE
-1: cache_op INDEX_STORE_TAG_D t0
- PTR_ADDU t0, a2
- bne t0, t1, 1b
-9: jr ra
- END(mips_init_dcache)
-
-/*
- * mips_cache_reset - low level initialisation of the primary caches
- *
- * This routine initialises the primary caches to ensure that they have good
- * parity. It must be called by the ROM before any cached locations are used
- * to prevent the possibility of data with bad parity being written to memory.
- *
- * To initialise the instruction cache it is essential that a source of data
- * with good parity is available. This routine will initialise an area of
- * memory starting at location zero to be used as a source of parity.
- *
- * RETURNS: N/A
- *
- */
-NESTED(mips_cache_reset, 0, ra)
- move RA, ra
- li t2, CONFIG_SYS_ICACHE_SIZE
- li t3, CONFIG_SYS_DCACHE_SIZE
- li t8, CONFIG_SYS_CACHELINE_SIZE
-
- li v0, MIPS_MAX_CACHE_SIZE
-
- /*
- * Now clear that much memory starting from zero.
- */
- PTR_LI a0, CKSEG1
- PTR_ADDU a1, a0, v0
-2: PTR_ADDIU a0, 64
- f_fill64 a0, -64, zero
- bne a0, a1, 2b
-
- /*
- * The caches are probably in an indeterminate state,
- * so we force good parity into them by doing an
- * invalidate, load/fill, invalidate for each line.
- */
-
- /*
- * Assume bottom of RAM will generate good parity for the cache.
- */
-
- /*
- * Initialize the I-cache first,
- */
- move a1, t2
- move a2, t8
- PTR_LA v1, mips_init_icache
- jalr v1
-
- /*
- * then initialize D-cache.
- */
- move a1, t3
- move a2, t8
- PTR_LA v1, mips_init_dcache
- jalr v1
-
- jr RA
- END(mips_cache_reset)
-
-/*
- * dcache_status - get cache status
- *
- * RETURNS: 0 - cache disabled; 1 - cache enabled
- *
- */
-LEAF(dcache_status)
- mfc0 t0, CP0_CONFIG
- li t1, CONF_CM_UNCACHED
- andi t0, t0, CONF_CM_CMASK
- move v0, zero
- beq t0, t1, 2f
- li v0, 1
-2: jr ra
- END(dcache_status)
-
-/*
- * dcache_disable - disable cache
- *
- * RETURNS: N/A
- *
- */
-LEAF(dcache_disable)
- mfc0 t0, CP0_CONFIG
- li t1, -8
- and t0, t0, t1
- ori t0, t0, CONF_CM_UNCACHED
- mtc0 t0, CP0_CONFIG
- jr ra
- END(dcache_disable)
-
-/*
- * dcache_enable - enable cache
- *
- * RETURNS: N/A
- *
- */
-LEAF(dcache_enable)
- mfc0 t0, CP0_CONFIG
- ori t0, CONF_CM_CMASK
- xori t0, CONF_CM_CMASK
- ori t0, CONF_CM_CACHABLE_NONCOHERENT
- mtc0 t0, CP0_CONFIG
- jr ra
- END(dcache_enable)
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index d939ee6..ac536da 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -6,6 +6,7 @@
#
obj-y += cache.o
+obj-y += cache_init.o
obj-y += io.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
diff --git a/arch/mips/cpu/mips32/cache.S b/arch/mips/lib/cache_init.S
similarity index 95%
rename from arch/mips/cpu/mips32/cache.S
rename to arch/mips/lib/cache_init.S
index fb1d84b..6c02bf9 100644
--- a/arch/mips/cpu/mips32/cache.S
+++ b/arch/mips/lib/cache_init.S
@@ -18,7 +18,11 @@
#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
#endif
-#define RA t9
+#ifdef CONFIG_64BIT
+# define RA ta3
+#else
+# define RA t7
+#endif
#define INDEX_BASE CKSEG0
@@ -117,7 +121,7 @@
#endif
#ifdef CONFIG_SYS_CACHELINE_SIZE
- li t7, CONFIG_SYS_CACHELINE_SIZE
+ li t9, CONFIG_SYS_CACHELINE_SIZE
li t8, CONFIG_SYS_CACHELINE_SIZE
#else
/* Detect I-cache line size. */
@@ -128,11 +132,11 @@
sllv t8, t6, t8
1: /* Detect D-cache line size. */
- srl t7, t5, MIPS_CONF1_DL_SHIFT
- andi t7, t7, (MIPS_CONF1_DL >> MIPS_CONF1_DL_SHIFT)
- beqz t7, 1f
+ srl t9, t5, MIPS_CONF1_DL_SHIFT
+ andi t9, t9, (MIPS_CONF1_DL >> MIPS_CONF1_DL_SHIFT)
+ beqz t9, 1f
li t6, 2
- sllv t7, t6, t7
+ sllv t9, t6, t9
1:
#endif
@@ -168,7 +172,7 @@
addi t6, t6, 1
sllv t4, t4, t6
1: /* At this point t4 == I-cache sets. */
- mul t3, t4, t7
+ mul t3, t4, t9
srl t6, t5, MIPS_CONF1_DA_SHIFT
andi t6, t6, (MIPS_CONF1_DA >> MIPS_CONF1_DA_SHIFT)
addi t6, t6, 1
@@ -219,7 +223,7 @@
* then initialize D-cache.
*/
move a1, t3
- move a2, t7
+ move a2, t9
PTR_LA v1, mips_init_dcache
jalr v1