rockchip: rk3399-nanopi-4: Sync DT from v6.8 and update defconfig
Sync rk3399-nanopi-4 related device tree from Linux kernel v6.8.
Add DM_RESET=y to support reset signals.
Add PCI=y, CMD_PCI=y and NVME_PCI=y to support PCIe and NVMe boot.
Add AHCI=y, SCSI_AHCI=y, AHCI_PCI=y and SCSI=y to support M4 SATA HAT.
Add ROCKCHIP_IODOMAIN=y to configure io-domain voltage.
Add MMC_SDHCI_SDMA=y to use DMA transfer for eMMC.
Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY.
Add PHY_ROCKCHIP_INNO_USB2=y and PHY_ROCKCHIP_TYPEC=y to support USB PHY.
Remove REGULATOR_PWM=y, boards does not use pwm-regulator compatible.
Remove SPL_TINY_MEMSET=y to use full memset in SPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
index 452728b..3bf8f95 100644
--- a/arch/arm/dts/rk3399-nanopc-t4.dts
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -39,7 +39,7 @@
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
- recovery {
+ button-recovery {
label = "Recovery";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <18000>;
diff --git a/arch/arm/dts/rk3399-nanopi-m4-2gb.dts b/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
index 60358ab..e9cf71f 100644
--- a/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
+++ b/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
@@ -10,57 +10,4 @@
*/
/dts-v1/;
-#include "rk3399-nanopi4.dtsi"
-
-/ {
- model = "FriendlyElec NanoPi M4";
- compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
-
- vdd_5v: vdd-5v {
- compatible = "regulator-fixed";
- regulator-name = "vdd_5v";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc5v0_core: vcc5v0-core {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_core";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_5v>;
- };
-
- vcc5v0_usb1: vcc5v0-usb1 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb1";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_usb2: vcc5v0-usb2 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb2";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&vcc3v3_sys {
- vin-supply = <&vcc5v0_core>;
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_usb1>;
-};
-
-&u2phy1_host {
- phy-supply = <&vcc5v0_usb2>;
-};
-
-&vbus_typec {
- regulator-always-on;
- vin-supply = <&vdd_5v>;
-};
+#include "rk3399-nanopi-m4.dts"
diff --git a/arch/arm/dts/rk3399-nanopi-m4b.dts b/arch/arm/dts/rk3399-nanopi-m4b.dts
index 72182c5..65cb218 100644
--- a/arch/arm/dts/rk3399-nanopi-m4b.dts
+++ b/arch/arm/dts/rk3399-nanopi-m4b.dts
@@ -19,7 +19,7 @@
keyup-threshold-microvolt = <1500000>;
poll-interval = <100>;
- recovery {
+ button-recovery {
label = "Recovery";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <18000>;
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
index cef4d18..fe5b526 100644
--- a/arch/arm/dts/rk3399-nanopi-r4s.dts
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -46,9 +46,9 @@
gpio-keys {
pinctrl-0 = <&reset_button_pin>;
- /delete-node/ power;
+ /delete-node/ key-power;
- reset {
+ key-reset {
debounce-interval = <50>;
gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
label = "reset";
diff --git a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
index e0d7a51..7573612 100644
--- a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
@@ -20,3 +20,7 @@
&vcc3v0_sd {
bootph-pre-ram;
};
+
+&vcc_sdio {
+ regulator-init-microvolt = <3000000>;
+};
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
index 8c0ff6c..b7f1e47 100644
--- a/arch/arm/dts/rk3399-nanopi4.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -18,6 +18,7 @@
/ {
aliases {
+ ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;
@@ -111,7 +112,7 @@
pinctrl-names = "default";
pinctrl-0 = <&power_key>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
@@ -167,6 +168,7 @@
};
&emmc_phy {
+ rockchip,enable-strobe-pulldown;
status = "okay";
};
@@ -267,7 +269,7 @@
interrupt-parent = <&gpio1>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
+ pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
rockchip,system-power-controller;
wakeup-source;
@@ -374,7 +376,6 @@
vcc_sdio: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
- regulator-init-microvolt = <3000000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_sdio";