ARM: dts: stm32mp: alignment with v6.6-rc1
Device tree alignment with Linux kernel v6.6.rc1.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
index bd72850..215ad92 100644
--- a/arch/arm/dts/stm32mp131.dtsi
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -33,6 +33,8 @@
optee {
method = "smc";
compatible = "linaro,optee-tz";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
scmi: scmi {
@@ -50,6 +52,28 @@
reg = <0x16>;
#reset-cells = <1>;
};
+
+ scmi_voltd: protocol@17 {
+ reg = <0x17>;
+
+ scmi_regu: regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_reg11: regulator@0 {
+ reg = <VOLTD_SCMI_REG11>;
+ regulator-name = "reg11";
+ };
+ scmi_reg18: regulator@1 {
+ reg = <VOLTD_SCMI_REG18>;
+ regulator-name = "reg18";
+ };
+ scmi_usb33: regulator@2 {
+ reg = <VOLTD_SCMI_USB33>;
+ regulator-name = "usb33";
+ };
+ };
+ };
};
};
@@ -76,28 +100,6 @@
always-on;
};
- /* PWR 1v1, 1v8 and 3v3 regulators defined as fixed, waiting for SCMI */
- reg11: reg11 {
- compatible = "regulator-fixed";
- regulator-name = "reg11";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
-
- reg18: reg18 {
- compatible = "regulator-fixed";
- regulator-name = "reg18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- usb33: usb33 {
- compatible = "regulator-fixed";
- regulator-name = "usb33";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -799,7 +801,7 @@
g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
dr_mode = "otg";
otg-rev = <0x200>;
- usb33d-supply = <&usb33>;
+ usb33d-supply = <&scmi_usb33>;
status = "disabled";
};
@@ -1337,8 +1339,8 @@
reg = <0x5a006000 0x1000>;
clocks = <&rcc USBPHY_K>;
resets = <&rcc USBPHY_R>;
- vdda1v1-supply = <®11>;
- vdda1v8-supply = <®18>;
+ vdda1v1-supply = <&scmi_reg11>;
+ vdda1v8-supply = <&scmi_reg18>;
status = "disabled";
usbphyc_port0: usb-phy@0 {
diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts
index f0900ca..eea740d 100644
--- a/arch/arm/dts/stm32mp135f-dk.dts
+++ b/arch/arm/dts/stm32mp135f-dk.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
#include "stm32mp135.dtsi"
#include "stm32mp13xf.dtsi"
#include "stm32mp13-pinctrl.dtsi"
@@ -65,45 +66,13 @@
default-state = "off";
};
};
-
- v3v3_sw: v3v3-sw {
- compatible = "regulator-fixed";
- regulator-name = "v3v3_sw";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_adc: vdd-adc {
- compatible = "regulator-fixed";
- regulator-name = "vdd_adc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_sd: vdd-sd {
- compatible = "regulator-fixed";
- regulator-name = "vdd_sd";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- regulator-always-on;
- };
-
- vdd_usb: vdd-usb {
- compatible = "regulator-fixed";
- regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
};
&adc_1 {
pinctrl-names = "default";
pinctrl-0 = <&adc1_usb_cc_pins_a>;
- vdda-supply = <&vdd_adc>;
- vref-supply = <&vdd_adc>;
+ vdda-supply = <&scmi_vdd_adc>;
+ vref-supply = <&scmi_vdd_adc>;
status = "okay";
adc1: adc@0 {
status = "okay";
@@ -195,6 +164,29 @@
status = "okay";
};
+&scmi_regu {
+ scmi_vdd_adc: regulator@10 {
+ reg = <VOLTD_SCMI_STPMIC1_LDO1>;
+ regulator-name = "vdd_adc";
+ };
+ scmi_vdd_usb: regulator@13 {
+ reg = <VOLTD_SCMI_STPMIC1_LDO4>;
+ regulator-name = "vdd_usb";
+ };
+ scmi_vdd_sd: regulator@14 {
+ reg = <VOLTD_SCMI_STPMIC1_LDO5>;
+ regulator-name = "vdd_sd";
+ };
+ scmi_v1v8_periph: regulator@15 {
+ reg = <VOLTD_SCMI_STPMIC1_LDO6>;
+ regulator-name = "v1v8_periph";
+ };
+ scmi_v3v3_sw: regulator@19 {
+ reg = <VOLTD_SCMI_STPMIC1_PWR_SW2>;
+ regulator-name = "v3v3_sw";
+ };
+};
+
&sdmmc1 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
@@ -204,7 +196,7 @@
disable-wp;
st,neg-edge;
bus-width = <4>;
- vmmc-supply = <&vdd_sd>;
+ vmmc-supply = <&scmi_vdd_sd>;
status = "okay";
};
@@ -321,7 +313,7 @@
hub@1 {
compatible = "usb424,2514";
reg = <1>;
- vdd-supply = <&v3v3_sw>;
+ vdd-supply = <&scmi_v3v3_sw>;
};
};
@@ -342,7 +334,7 @@
};
&usbphyc_port0 {
- phy-supply = <&vdd_usb>;
+ phy-supply = <&scmi_vdd_usb>;
st,current-boost-microamp = <1000>;
st,decrease-hs-slew-rate;
st,tune-hs-dc-level = <2>;
@@ -356,7 +348,7 @@
};
&usbphyc_port1 {
- phy-supply = <&vdd_usb>;
+ phy-supply = <&scmi_vdd_usb>;
st,current-boost-microamp = <1000>;
st,decrease-hs-slew-rate;
st,tune-hs-dc-level = <2>;
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index e86d989..098153e 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -6,6 +6,17 @@
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
&pinctrl {
+ adc1_ain_pins_a: adc1-ain-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */
+ <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */
+ <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1_INP13 */
+ <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1_INP15 */
+ };
+ };
+
adc1_in6_pins_a: adc1-in6-0 {
pins {
pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
@@ -341,6 +352,96 @@
};
};
+ ethernet0_rgmii_pins_d: rgmii-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ };
+
+ ethernet0_rgmii_sleep_pins_d: rgmii-sleep-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+ };
+ };
+
+ ethernet0_rgmii_pins_e: rgmii-4 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>; /* ETH_RGMII_TX_CTL */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ };
+
+ ethernet0_rgmii_sleep_pins_e: rgmii-sleep-4 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+ };
+ };
+
ethernet0_rmii_pins_a: rmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
@@ -1104,6 +1205,20 @@
};
};
+ pwm1_pins_c: pwm1-2 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 11, AF1)>; /* TIM1_CH2 */
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_sleep_pins_c: pwm1-sleep-2 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 11, ANALOG)>; /* TIM1_CH2 */
+ };
+ };
+
pwm2_pins_a: pwm2-0 {
pins {
pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
@@ -1230,6 +1345,26 @@
};
};
+ pwm8_pins_b: pwm8-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, AF3)>, /* TIM8_CH1 */
+ <STM32_PINMUX('I', 6, AF3)>, /* TIM8_CH2 */
+ <STM32_PINMUX('I', 7, AF3)>, /* TIM8_CH3 */
+ <STM32_PINMUX('C', 9, AF3)>; /* TIM8_CH4 */
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_sleep_pins_b: pwm8-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* TIM8_CH1 */
+ <STM32_PINMUX('I', 6, ANALOG)>, /* TIM8_CH2 */
+ <STM32_PINMUX('I', 7, ANALOG)>, /* TIM8_CH3 */
+ <STM32_PINMUX('C', 9, ANALOG)>; /* TIM8_CH4 */
+ };
+ };
+
pwm12_pins_a: pwm12-0 {
pins {
pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
@@ -1441,6 +1576,30 @@
};
};
+ sai2b_pins_d: sai2b-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, AF10)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('C', 0, AF8)>, /* SAI2_FS_B */
+ <STM32_PINMUX('H', 3, AF10)>; /* SAI2_MCLK_B */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_d: sai2b-sleep-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* SAI2_FS_B */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* SAI2_MCLK_B */
+ <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+ };
+ };
+
sai4a_pins_a: sai4a-0 {
pins {
pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
@@ -1522,6 +1681,60 @@
};
};
+ sdmmc1_b4_pins_b: sdmmc1-b4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_od_pins_b: sdmmc1-b4-od-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_b: sdmmc1-b4-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('E', 6, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
sdmmc1_dir_pins_a: sdmmc1-dir-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
@@ -1531,7 +1744,7 @@
drive-push-pull;
bias-pull-up;
};
- pins2{
+ pins2 {
pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
bias-pull-up;
};
@@ -1566,7 +1779,7 @@
drive-push-pull;
bias-pull-up;
};
- pins2{
+ pins2 {
pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
bias-pull-up;
};
@@ -1759,6 +1972,27 @@
};
};
+ sdmmc2_d47_pins_e: sdmmc2-d47-4 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_d47_sleep_pins_e: sdmmc2-d47-sleep-4 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+ };
+ };
+
sdmmc3_b4_pins_a: sdmmc3-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
@@ -1925,6 +2159,20 @@
};
};
+ spi2_pins_c: spi2-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
+ <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+ bias-disable;
+ drive-push-pull;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+ bias-pull-down;
+ };
+ };
+
spi4_pins_a: spi4-0 {
pins {
pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
@@ -1939,6 +2187,21 @@
};
};
+ spi5_pins_a: spi5-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 7, AF5)>, /* SPI5_SCK */
+ <STM32_PINMUX('F', 9, AF5)>; /* SPI5_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 8, AF5)>; /* SPI5_MISO */
+ bias-disable;
+ };
+ };
+
stusb1600_pins_a: stusb1600-0 {
pins {
pinmux = <STM32_PINMUX('I', 11, GPIO)>;
@@ -2124,6 +2387,33 @@
};
};
+ usart1_pins_a: usart1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 12, AF7)>; /* USART1_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart1_idle_pins_a: usart1-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */
+ <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */
+ };
+ };
+
+ usart1_sleep_pins_a: usart1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */
+ <STM32_PINMUX('A', 11, ANALOG)>; /* USART1_CTS_NSS */
+ };
+ };
+
usart2_pins_a: usart2-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
@@ -2226,6 +2516,23 @@
};
};
+ usart3_idle_pins_a: usart3-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>; /* USART3_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+ bias-disable;
+ };
+ };
+
+ usart3_sleep_pins_a: usart3-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+ };
+ };
+
usart3_pins_b: usart3-1 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
@@ -2385,6 +2692,21 @@
};
};
+ usart3_pins_f: usart3-5 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+ <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
@@ -2461,6 +2783,44 @@
pins2 {
pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
bias-disable;
+ };
+ };
+
+ spi1_sleep_pins_a: spi1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI1_SCK */
+ <STM32_PINMUX('Z', 1, ANALOG)>, /* SPI1_MISO */
+ <STM32_PINMUX('Z', 2, ANALOG)>; /* SPI1_MOSI */
+ };
+ };
+
+ usart1_pins_b: usart1-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('Z', 7, AF7)>; /* USART1_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */
+ bias-disable;
+ };
+ };
+
+ usart1_idle_pins_b: usart1-idle-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('Z', 7, ANALOG)>; /* USART1_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */
+ bias-disable;
+ };
+ };
+
+ usart1_sleep_pins_b: usart1-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 7, ANALOG)>, /* USART1_TX */
+ <STM32_PINMUX('Z', 6, ANALOG)>; /* USART1_RX */
};
};
};
diff --git a/arch/arm/dts/stm32mp15-scmi.dtsi b/arch/arm/dts/stm32mp15-scmi.dtsi
index ad25842..dc3b09f 100644
--- a/arch/arm/dts/stm32mp15-scmi.dtsi
+++ b/arch/arm/dts/stm32mp15-scmi.dtsi
@@ -34,22 +34,21 @@
#address-cells = <1>;
#size-cells = <0>;
- scmi_reg11: reg11@0 {
+ scmi_reg11: regulator@0 {
reg = <0>;
regulator-name = "reg11";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- scmi_reg18: reg18@1 {
- voltd-name = "reg18";
+ scmi_reg18: regulator@1 {
reg = <1>;
regulator-name = "reg18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- scmi_usb33: usb33@2 {
+ scmi_usb33: regulator@2 {
reg = <2>;
regulator-name = "usb33";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 21d11be..e277140 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -1111,6 +1111,8 @@
adc1: adc@0 {
compatible = "st,stm32mp1-adc";
#io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x0>;
interrupt-parent = <&adc>;
interrupts = <0>;
@@ -1122,12 +1124,24 @@
adc2: adc@100 {
compatible = "st,stm32mp1-adc";
#io-channel-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x100>;
interrupt-parent = <&adc>;
interrupts = <1>;
dmas = <&dmamux1 10 0x400 0x01>;
dma-names = "rx";
+ nvmem-cells = <&vrefint>;
+ nvmem-cell-names = "vrefint";
status = "disabled";
+ channel@13 {
+ reg = <13>;
+ label = "vrefint";
+ };
+ channel@14 {
+ reg = <14>;
+ label = "vddcore";
+ };
};
};
@@ -1162,14 +1176,6 @@
status = "disabled";
};
- hwspinlock: hwspinlock@4c000000 {
- compatible = "st,stm32-hwspinlock";
- #hwlock-cells = <1>;
- reg = <0x4c000000 0x400>;
- clocks = <&rcc HSEM>;
- clock-names = "hwspinlock";
- };
-
ipcc: mailbox@4c001000 {
compatible = "st,stm32mp1-ipcc";
#mbox-cells = <1>;
@@ -1559,11 +1565,6 @@
clock-names = "lcd";
resets = <&rcc LTDC_R>;
status = "disabled";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
- };
};
iwdg2: watchdog@5a002000 {
@@ -1650,9 +1651,12 @@
reg = <0x5c005000 0x400>;
#address-cells = <1>;
#size-cells = <1>;
- part_number_otp: part_number_otp@4 {
+ part_number_otp: part-number-otp@4 {
reg = <0x4 0x1>;
};
+ vrefint: vrefin-cal@52 {
+ reg = <0x52 0x2>;
+ };
ts_cal1: calib@5c {
reg = <0x5c 0x2>;
};
@@ -1853,8 +1857,8 @@
<0x30000000 0x40000>,
<0x38000000 0x10000>;
resets = <&rcc MCU_R>;
+ reset-names = "mcu_rst";
st,syscfg-holdboot = <&rcc 0x10C 0x1>;
- st,syscfg-tz = <&rcc 0x000 0x1>;
st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi
index 54e73cc..6197d87 100644
--- a/arch/arm/dts/stm32mp157.dtsi
+++ b/arch/arm/dts/stm32mp157.dtsi
@@ -22,15 +22,26 @@
reg = <0x5a000000 0x800>;
clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
clock-names = "pclk", "ref", "px_clk";
+ phy-dsi-supply = <®18>;
resets = <&rcc DSI_R>;
reset-names = "apb";
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ };
+ };
};
};
};
diff --git a/arch/arm/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/dts/stm32mp157a-dk1-scmi.dts
index e539cc8..afcd628 100644
--- a/arch/arm/dts/stm32mp157a-dk1-scmi.dts
+++ b/arch/arm/dts/stm32mp157a-dk1-scmi.dts
@@ -55,8 +55,11 @@
resets = <&scmi_reset RST_SCMI_MDMA>;
};
-&mlahb {
- resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+ /delete-property/ st,syscfg-holdboot;
+ resets = <&scmi_reset RST_SCMI_MCU>,
+ <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index fae656e..f4a4942 100644
--- a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -81,6 +81,9 @@
status = "okay";
port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
ltdc_ep0_out: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_in>;
diff --git a/arch/arm/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/dts/stm32mp157c-dk2-scmi.dts
index 97e4f94..39358d9 100644
--- a/arch/arm/dts/stm32mp157c-dk2-scmi.dts
+++ b/arch/arm/dts/stm32mp157c-dk2-scmi.dts
@@ -61,8 +61,11 @@
resets = <&scmi_reset RST_SCMI_MDMA>;
};
-&mlahb {
- resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+ /delete-property/ st,syscfg-holdboot;
+ resets = <&scmi_reset RST_SCMI_MCU>,
+ <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts
index ab13e34..510cca5 100644
--- a/arch/arm/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/dts/stm32mp157c-dk2.dts
@@ -31,24 +31,9 @@
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
- phy-dsi-supply = <®18>;
-
- ports {
- port@0 {
- reg = <0>;
- dsi_in: endpoint {
- remote-endpoint = <<dc_ep1_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- dsi_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
- };
panel@0 {
compatible = "orisetech,otm8009a";
@@ -65,6 +50,14 @@
};
};
+&dsi_in {
+ remote-endpoint = <<dc_ep1_out>;
+};
+
+&dsi_out {
+ remote-endpoint = <&panel_in>;
+};
+
&i2c1 {
touchscreen@38 {
compatible = "focaltech,ft6236";
@@ -82,6 +75,9 @@
status = "okay";
port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
ltdc_ep1_out: endpoint@1 {
reg = <1>;
remote-endpoint = <&dsi_in>;
diff --git a/arch/arm/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/dts/stm32mp157c-ed1-scmi.dts
index 9cf0a44..07ea765 100644
--- a/arch/arm/dts/stm32mp157c-ed1-scmi.dts
+++ b/arch/arm/dts/stm32mp157c-ed1-scmi.dts
@@ -60,8 +60,11 @@
resets = <&scmi_reset RST_SCMI_MDMA>;
};
-&mlahb {
- resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+ /delete-property/ st,syscfg-holdboot;
+ resets = <&scmi_reset RST_SCMI_MCU>,
+ <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index 3541a17..66ed5f9 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -103,21 +103,23 @@
vref-supply = <&vdda>;
status = "disabled";
adc1: adc@0 {
- st,adc-channels = <0 1 6>;
- /* 16.5 ck_cycles sampling time */
- st,min-sample-time-nsecs = <400>;
status = "okay";
+ channel@0 {
+ reg = <0>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-ns = <400>;
+ };
+ channel@1 {
+ reg = <1>;
+ st,min-sample-time-ns = <400>;
+ };
+ channel@6 {
+ reg = <6>;
+ st,min-sample-time-ns = <400>;
+ };
};
};
-&cpu0{
- cpu-supply = <&vddcore>;
-};
-
-&cpu1{
- cpu-supply = <&vddcore>;
-};
-
&crc1 {
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/dts/stm32mp157c-ev1-scmi.dts
index 3b9dd6f..813086e 100644
--- a/arch/arm/dts/stm32mp157c-ev1-scmi.dts
+++ b/arch/arm/dts/stm32mp157c-ev1-scmi.dts
@@ -66,8 +66,11 @@
resets = <&scmi_reset RST_SCMI_MDMA>;
};
-&mlahb {
- resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+ /delete-property/ st,syscfg-holdboot;
+ resets = <&scmi_reset RST_SCMI_MCU>,
+ <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+ reset-names = "mcu_rst", "hold_boot";
};
&rcc {
diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index ba8e9d9..cd9c3ff 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -100,26 +100,11 @@
};
&dsi {
- phy-dsi-supply = <®18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
- ports {
- port@0 {
- reg = <0>;
- dsi_in: endpoint {
- remote-endpoint = <<dc_ep0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- dsi_out: endpoint {
- remote-endpoint = <&dsi_panel_in>;
- };
- };
- };
-
- panel-dsi@0 {
+ panel@0 {
compatible = "raydium,rm68200";
reg = <0>;
reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
@@ -135,6 +120,14 @@
};
};
+&dsi_in {
+ remote-endpoint = <<dc_ep0_out>;
+};
+
+&dsi_out {
+ remote-endpoint = <&dsi_panel_in>;
+};
+
ðernet0 {
status = "okay";
pinctrl-0 = <ðernet0_rgmii_pins_a>;
@@ -185,7 +178,9 @@
reg = <0x3c>;
clocks = <&clk_ext_camera>;
clock-names = "xclk";
+ AVDD-supply = <&v2v8>;
DOVDD-supply = <&v2v8>;
+ DVDD-supply = <&v2v8>;
powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
rotation = <180>;
@@ -239,8 +234,7 @@
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&dsi_in>;
};
};
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index f4de6c0..511113f 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -93,28 +93,39 @@
&adc {
pinctrl-names = "default";
- pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+ pinctrl-0 = <&adc12_usb_cc_pins_a>;
vdd-supply = <&vdd>;
vdda-supply = <&vdd>;
vref-supply = <&vrefbuf>;
- status = "disabled";
+ status = "okay";
adc1: adc@0 {
+ status = "okay";
/*
* Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
* Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
* 5 * (56 + 47kOhms) * 5pF => 2.5us.
* Use arbitrary margin here (e.g. 5us).
*/
- st,min-sample-time-nsecs = <5000>;
- /* AIN connector, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 6 13 18 19>;
- status = "okay";
+ channel@18 {
+ reg = <18>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@19 {
+ reg = <19>;
+ st,min-sample-time-ns = <5000>;
+ };
};
adc2: adc@100 {
- /* AIN connector, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 2 6 18 19>;
- st,min-sample-time-nsecs = <5000>;
status = "okay";
+ /* USB Type-C CC1 & CC2 */
+ channel@18 {
+ reg = <18>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@19 {
+ reg = <19>;
+ st,min-sample-time-ns = <5000>;
+ };
};
};
@@ -133,14 +144,6 @@
status = "okay";
};
-&cpu0{
- cpu-supply = <&vddcore>;
-};
-
-&cpu1{
- cpu-supply = <&vddcore>;
-};
-
ðernet0 {
status = "okay";
pinctrl-0 = <ðernet0_rgmii_pins_a>;
@@ -443,7 +446,7 @@
i2s2_port: port {
i2s2_endpoint: endpoint {
remote-endpoint = <&sii9022_tx_endpoint>;
- format = "i2s";
+ dai-format = "i2s";
mclk-fs = <256>;
};
};
@@ -465,8 +468,7 @@
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&sii9022_in>;
};
};