rockchip: dm: convert fdt_get to dev_read
With the new dev_read functions available, we can convert the rockchip
architecture-specific drivers and common drivers used by these devices
over to the dev_read family of calls.
This covers the DRAM controller initialisation for the RK3188, RK3288
and RK3399... all of these read some of the tuning/setup/timing
parameters from the device-tree.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/mach-rockchip/rk3188/sdram_rk3188.c b/arch/arm/mach-rockchip/rk3188/sdram_rk3188.c
index 946a9f1..981d1d6 100644
--- a/arch/arm/mach-rockchip/rk3188/sdram_rk3188.c
+++ b/arch/arm/mach-rockchip/rk3188/sdram_rk3188.c
@@ -851,29 +851,27 @@
{
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3188_sdram_params *params = dev_get_platdata(dev);
- const void *blob = gd->fdt_blob;
- int node = dev_of_offset(dev);
int ret;
/* rk3188 supports only one-channel */
params->num_channels = 1;
- ret = fdtdec_get_int_array(blob, node, "rockchip,pctl-timing",
- (u32 *)¶ms->pctl_timing,
- sizeof(params->pctl_timing) / sizeof(u32));
+ ret = dev_read_u32_array(dev, "rockchip,pctl-timing",
+ (u32 *)¶ms->pctl_timing,
+ sizeof(params->pctl_timing) / sizeof(u32));
if (ret) {
printf("%s: Cannot read rockchip,pctl-timing\n", __func__);
return -EINVAL;
}
- ret = fdtdec_get_int_array(blob, node, "rockchip,phy-timing",
- (u32 *)¶ms->phy_timing,
- sizeof(params->phy_timing) / sizeof(u32));
+ ret = dev_read_u32_array(dev, "rockchip,phy-timing",
+ (u32 *)¶ms->phy_timing,
+ sizeof(params->phy_timing) / sizeof(u32));
if (ret) {
printf("%s: Cannot read rockchip,phy-timing\n", __func__);
return -EINVAL;
}
- ret = fdtdec_get_int_array(blob, node, "rockchip,sdram-params",
- (u32 *)¶ms->base,
- sizeof(params->base) / sizeof(u32));
+ ret = dev_read_u32_array(dev, "rockchip,sdram-params",
+ (u32 *)¶ms->base,
+ sizeof(params->base) / sizeof(u32));
if (ret) {
printf("%s: Cannot read rockchip,sdram-params\n", __func__);
return -EINVAL;