arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
Change active-high to active-low and change DT property name from
reset-gpio to reset-gpios. This format of gpio reset is used by
pci-aardvark driver in Linux kernel.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Tested-by: Andre Heider <a.heider@gmail.com>
diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts
index 1b219c4..1b1b66b 100644
--- a/arch/arm/dts/armada-3720-db.dts
+++ b/arch/arm/dts/armada-3720-db.dts
@@ -159,6 +159,6 @@
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
- reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 50381e9..2ace52e 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -145,6 +145,6 @@
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
- reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
index 0f0a6ce..974270c 100644
--- a/arch/arm/dts/armada-3720-turris-mox.dts
+++ b/arch/arm/dts/armada-3720-turris-mox.dts
@@ -172,6 +172,6 @@
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
- reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "disabled";
};
diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c
index 711b930..5b3f23c 100644
--- a/drivers/pci/pci-aardvark.c
+++ b/drivers/pci/pci-aardvark.c
@@ -616,7 +616,7 @@
#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc reset_gpio;
- gpio_request_by_name(dev, "reset-gpio", 0, &reset_gpio,
+ gpio_request_by_name(dev, "reset-gpios", 0, &reset_gpio,
GPIOD_IS_OUT);
/*
* Issue reset to add-in card through the dedicated GPIO.
@@ -633,9 +633,9 @@
*/
if (dm_gpio_is_valid(&reset_gpio)) {
dev_dbg(pcie->dev, "Toggle PCIE Reset GPIO ...\n");
- dm_gpio_set_value(&reset_gpio, 0);
- mdelay(200);
dm_gpio_set_value(&reset_gpio, 1);
+ mdelay(200);
+ dm_gpio_set_value(&reset_gpio, 0);
}
#else
dev_dbg(pcie->dev, "PCIE Reset on GPIO support is missing\n");