MIPS: add BMIPS Sagem F@ST1704 board
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index fdce645..a190485 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -13,6 +13,7 @@
dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
+dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
targets += $(dtb-y)
diff --git a/arch/mips/dts/sagem,f@st1704.dts b/arch/mips/dts/sagem,f@st1704.dts
new file mode 100644
index 0000000..be15fe5
--- /dev/null
+++ b/arch/mips/dts/sagem,f@st1704.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "brcm,bcm6338.dtsi"
+
+/ {
+ model = "Sagem F@ST1704";
+ compatible = "sagem,f@st1704", "brcm,bcm6338";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ inet_green {
+ label = "F@ST1704:green:inet";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ power_green {
+ label = "F@ST1704:green:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ inet_red {
+ label = "F@ST1704:red:inet";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
diff --git a/arch/mips/mach-bmips/Kconfig b/arch/mips/mach-bmips/Kconfig
index 7071888..fe19ced 100644
--- a/arch/mips/mach-bmips/Kconfig
+++ b/arch/mips/mach-bmips/Kconfig
@@ -121,6 +121,17 @@
ethernet ports, 1 UART, GPIO buttons and LEDs, and a BCM43225
(miniPCIe).
+config BOARD_SAGEM_FAST1704
+ bool "Sagem F@ST1704"
+ depends on SOC_BMIPS_BCM6338
+ select BMIPS_SUPPORTS_BOOT_RAM
+ help
+ Sagem F@ST1704 boards have a BCM6338 SoC with 16 MB of RAM and 4 MB
+ of flash (SPI).
+ Between its different peripherals there's a BCM5325 switch with 4
+ ethernet ports, 1 UART, GPIO buttons and LEDs, and a BCM4312
+ (miniPCI).
+
config BOARD_SFR_NB4_SER
bool "SFR NeufBox 4 (Sercomm)"
depends on SOC_BMIPS_BCM6358
@@ -149,6 +160,7 @@
source "board/comtrend/vr3032u/Kconfig"
source "board/huawei/hg556a/Kconfig"
source "board/netgear/cg3100d/Kconfig"
+source "board/sagem/f@st1704/Kconfig"
source "board/sfr/nb4_ser/Kconfig"
endmenu