toradex: apalis-imx8x: drop support for apalis imx8x
Drop Apalis iMX8X platform as it never left sample state and is no
longer supported.
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
diff --git a/board/toradex/apalis-imx8x/Kconfig b/board/toradex/apalis-imx8x/Kconfig
deleted file mode 100644
index d6cda7e..0000000
--- a/board/toradex/apalis-imx8x/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-if TARGET_APALIS_IMX8X
-
-config SYS_BOARD
- default "apalis-imx8x"
-
-config SYS_VENDOR
- default "toradex"
-
-config SYS_CONFIG_NAME
- default "apalis-imx8x"
-
-config TDX_CFG_BLOCK
- default y
-
-config TDX_HAVE_MMC
- default y
-
-config TDX_CFG_BLOCK_DEV
- default "0"
-
-config TDX_CFG_BLOCK_PART
- default "1"
-
-# Toradex config block in eMMC, at the end of 1st "boot sector"
-config TDX_CFG_BLOCK_OFFSET
- default "-512"
-
-config IMX_CONFIG
- default "board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg"
-
-source "board/toradex/common/Kconfig"
-
-endif
diff --git a/board/toradex/apalis-imx8x/MAINTAINERS b/board/toradex/apalis-imx8x/MAINTAINERS
deleted file mode 100644
index 93d6cdd..0000000
--- a/board/toradex/apalis-imx8x/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-Apalis iMX8X
-M: Marcel Ziswiler <marcel.ziswiler@toradex.com>
-W: http://developer.toradex.com/software/linux/linux-software
-S: Maintained
-F: arch/arm/dts/fsl-imx8x-apalis.dts
-F: arch/arm/dts/fsl-imx8x-apalis-u-boot.dtsi
-F: board/toradex/apalis-imx8x/
-F: configs/apalis-imx8x_defconfig
-F: doc/board/toradex/apalis-imx8x.rst
-F: include/configs/apalis-imx8x.h
diff --git a/board/toradex/apalis-imx8x/Makefile b/board/toradex/apalis-imx8x/Makefile
deleted file mode 100644
index 9d6e85b..0000000
--- a/board/toradex/apalis-imx8x/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2020 Toradex
-#
-
-obj-y += apalis-imx8x.o
diff --git a/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg b/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg
deleted file mode 100644
index c229706..0000000
--- a/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2020 Toradex
- *
- * Refer doc/imx/mkimage/imx8image.txt for more details about how-to configure
- * and create imx8image boot image
- */
-
-
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM EMMC_FASTBOOT 0x400
-/* SoC type IMX8QX */
-SOC_TYPE IMX8QX
-/* Append seco container image */
-APPEND mx8qx-ahab-container.img
-/* Create the 2nd container */
-CONTAINER
-/* Add scfw image with exec attribute */
-IMAGE SCU mx8qx-apalis-scfw-tcm.bin
-/* Add ATF image with exec attribute */
-IMAGE A35 bl31.bin 0x80000000
-/* Add U-Boot image with load attribute */
-DATA A35 u-boot-dtb.bin 0x80020000
diff --git a/board/toradex/apalis-imx8x/apalis-imx8x.c b/board/toradex/apalis-imx8x/apalis-imx8x.c
deleted file mode 100644
index ac3bac6..0000000
--- a/board/toradex/apalis-imx8x/apalis-imx8x.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2020 Toradex
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/imx8-pins.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/sci/sci.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <env.h>
-#include <errno.h>
-#include <linux/libfdt.h>
-
-#include "../common/tdx-cfg-block.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
- (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
- (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
- (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
-
-static iomux_cfg_t uart1_pads[] = {
- SC_P_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
- SC_P_UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-static void setup_iomux_uart(void)
-{
- imx8_iomux_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
-void board_mem_get_layout(u64 *phys_sdram_1_start,
- u64 *phys_sdram_1_size,
- u64 *phys_sdram_2_start,
- u64 *phys_sdram_2_size)
-{
- u32 is_dualx = 0, val = 0;
- sc_err_t scierr = sc_misc_otp_fuse_read(-1, 6, &val);
-
- if (scierr == SC_ERR_NONE) {
- /* DX has two A35 cores disabled */
- is_dualx = (val & 0xf) != 0x0;
- }
-
- *phys_sdram_1_start = PHYS_SDRAM_1;
- if (is_dualx)
- /* Our DX based SKUs only have 1 GB RAM */
- *phys_sdram_1_size = SZ_1G;
- else
- *phys_sdram_1_size = PHYS_SDRAM_1_SIZE;
- *phys_sdram_2_start = PHYS_SDRAM_2;
- *phys_sdram_2_size = PHYS_SDRAM_2_SIZE;
-}
-
-int board_early_init_f(void)
-{
- sc_pm_clock_rate_t rate;
- sc_err_t err = 0;
-
- /*
- * This works around that having only UART3 up the baudrate is 1.2M
- * instead of 115.2k. Set UART0 clock root to 80 MHz
- */
- rate = 80000000;
- err = sc_pm_set_clock_rate(-1, SC_R_UART_0, SC_PM_CLK_PER, &rate);
- if (err != SC_ERR_NONE)
- return 0;
-
- /* Set UART3 clock root to 80 MHz and enable it */
- rate = SC_80MHZ;
- err = sc_pm_setup_uart(SC_R_UART_1, rate);
- if (err != SC_ERR_NONE)
- return 0;
-
- setup_iomux_uart();
-
- return 0;
-}
-
-#if IS_ENABLED(CONFIG_DM_GPIO)
-static void board_gpio_init(void)
-{
- /* TODO */
-}
-#else
-static inline void board_gpio_init(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_FEC_MXC)
-#include <miiphy.h>
-
-int board_phy_config(struct phy_device *phydev)
-{
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-#endif
-
-int checkboard(void)
-{
- puts("Model: Toradex Apalis iMX8X\n");
-
- build_info();
- print_bootinfo();
-
- return 0;
-}
-
-int board_init(void)
-{
- board_gpio_init();
-
- return 0;
-}
-
-/*
- * Board specific reset that is system reset.
- */
-void reset_cpu(void)
-{
- /* TODO */
-}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- return ft_common_board_setup(blob, bd);
-}
-#endif
-
-int board_mmc_get_env_dev(int devno)
-{
- return devno;
-}
-
-int board_late_init(void)
-{
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-/* TODO move to common */
- env_set("board_name", "Apalis iMX8X");
-#endif
-
- return 0;
-}
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index 7cadd05..0e657a2 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -13,7 +13,6 @@
#if defined(CONFIG_TARGET_APALIS_IMX6) || \
defined(CONFIG_TARGET_APALIS_IMX8) || \
- defined(CONFIG_TARGET_APALIS_IMX8X) || \
defined(CONFIG_TARGET_COLIBRI_IMX6) || \
defined(CONFIG_TARGET_COLIBRI_IMX8X) || \
defined(CONFIG_TARGET_VERDIN_IMX8MM) || \
@@ -379,7 +378,6 @@
it = console_buffer[0];
#if defined(CONFIG_TARGET_APALIS_IMX8) || \
- defined(CONFIG_TARGET_APALIS_IMX8X) || \
defined(CONFIG_TARGET_COLIBRI_IMX6ULL) || \
defined(CONFIG_TARGET_COLIBRI_IMX8X) || \
defined(CONFIG_TARGET_VERDIN_IMX8MM) || \
@@ -451,16 +449,7 @@
tdx_hw_tag.prodid = APALIS_IMX8QP;
}
} else if (is_cpu_type(MXC_CPU_IMX8QXP)) {
-#ifdef CONFIG_TARGET_APALIS_IMX8X
- if (it == 'y' || it == 'Y' || wb == 'y' || wb == 'Y') {
- tdx_hw_tag.prodid = APALIS_IMX8QXP_WIFI_BT_IT;
- } else {
- if (gd->ram_size == 0x40000000)
- tdx_hw_tag.prodid = APALIS_IMX8DXP;
- else
- tdx_hw_tag.prodid = APALIS_IMX8QXP;
- }
-#elif CONFIG_TARGET_COLIBRI_IMX8X
+#ifdef CONFIG_TARGET_COLIBRI_IMX8X
if (it == 'y' || it == 'Y') {
if (wb == 'y' || wb == 'Y')
tdx_hw_tag.prodid = COLIBRI_IMX8QXP_WIFI_BT_IT;