recipes-wifi/linux-mt76/files/patches/3011-mt76-mt7915-wed-add-mt7916-2-pcie-support-when-wed-o.patch

From 6a67d8e3c682c1f4332c2a45e0e4214c54605e67 Mon Sep 17 00:00:00 2001
From: Sujuan Chen <sujuan.chen@mediatek.com>
Date: Fri, 2 Dec 2022 17:17:06 +0800
Subject: [PATCH 3011/3012] mt76: mt7915: wed: add mt7916 2 pcie support when
 wed on

It should use bit 23 in interrupt mask for wfdma band1 data
for 2 pcie mt7916, and use bit 19 for  band1 data for 1 pcie.

Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
---
 mt7915/dma.c  |  8 ++++++--
 mt7915/mcu.c  |  3 ++-
 mt7915/mmio.c | 10 +++++-----
 3 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/mt7915/dma.c b/mt7915/dma.c
index 1ae6c339..36260085 100644
--- a/mt7915/dma.c
+++ b/mt7915/dma.c
@@ -88,8 +88,12 @@ static void mt7915_dma_config(struct mt7915_dev *dev)
 				   MT7916_RXQ_BAND0);
 			RXQ_CONFIG(MT_RXQ_MCU_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MT7916,
 				   MT7916_RXQ_MCU_WA);
-			RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0, MT_INT_WED_RX_DONE_BAND1_MT7916,
-				   MT7916_RXQ_BAND1);
+			if (dev->hif2)
+				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0, MT_INT_RX_DONE_BAND1_MT7916,
+					   MT7916_RXQ_BAND1);
+			else
+				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0, MT_INT_WED_RX_DONE_BAND1_MT7916,
+					   MT7916_RXQ_BAND1);
 			RXQ_CONFIG(MT_RXQ_MAIN_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MAIN_MT7916,
 				   MT7916_RXQ_MCU_WA_MAIN);
 			TXQ_CONFIG(0, WFDMA0, MT_INT_WED_TX_DONE_BAND0,
diff --git a/mt7915/mcu.c b/mt7915/mcu.c
index 3db8e436..2a689e92 100644
--- a/mt7915/mcu.c
+++ b/mt7915/mcu.c
@@ -2351,7 +2351,8 @@ int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
 		return ret;
 
 	if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
-		if (is_mt7915(&dev->mt76))
+		if (is_mt7915(&dev->mt76) ||
+		    !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
 			ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
 						0, 0, 0);
 		else
diff --git a/mt7915/mmio.c b/mt7915/mmio.c
index ecc38e05..992beca3 100644
--- a/mt7915/mmio.c
+++ b/mt7915/mmio.c
@@ -964,13 +964,13 @@ irqreturn_t mt7915_irq_handler(int irq, void *dev_instance)
 	struct mt7915_dev *dev = dev_instance;
 	struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
 
-	if (mtk_wed_device_active(wed)) {
+	if (mtk_wed_device_active(wed))
 		mtk_wed_device_irq_set_mask(wed, 0);
-	} else {
+	else
 		mt76_wr(dev, MT_INT_MASK_CSR, 0);
-		if (dev->hif2)
-			mt76_wr(dev, MT_INT1_MASK_CSR, 0);
-	}
+
+	if (dev->hif2)
+		mt76_wr(dev, MT_INT1_MASK_CSR, 0);
 
 	if (!test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state))
 		return IRQ_NONE;
-- 
2.25.1