[Add meta-filogic bsp for rdkb development]
[Description]
Add meta-filogic bsp for rdkb development
1. rdkb base on dunfell rdkb-next (> 2022q1)
2. arm64/arm 32bit bsp both can run on rdkb
[Release-log]
N/A
diff --git a/recipes-kernel/linux/linux-mediatek-5.4/mediatek/patches-5.4/0227-arm-dts-Add-Unielec-U7623-DTS.patch b/recipes-kernel/linux/linux-mediatek-5.4/mediatek/patches-5.4/0227-arm-dts-Add-Unielec-U7623-DTS.patch
new file mode 100644
index 0000000..3cb1dab
--- /dev/null
+++ b/recipes-kernel/linux/linux-mediatek-5.4/mediatek/patches-5.4/0227-arm-dts-Add-Unielec-U7623-DTS.patch
@@ -0,0 +1,387 @@
+From 004eb24e939b5b31f828333f37fb5cb2a877d6f2 Mon Sep 17 00:00:00 2001
+From: Kristian Evensen <kristian.evensen@gmail.com>
+Date: Sun, 17 Jun 2018 14:41:47 +0200
+Subject: [PATCH] arm: dts: Add Unielec U7623 DTS
+
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ .../dts/mt7623a-unielec-u7623-02-emmc-512m.dts | 18 +
+ .../boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi | 366 +++++++++++++++++++++
+ 3 files changed, 385 insertions(+)
+ create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512m.dts
+ create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -1272,6 +1272,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt7623a-rfb-nand.dtb \
+ mt7623n-rfb-emmc.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
++ mt7623a-unielec-u7623-02-emmc-512m.dtb \
+ mt7629-rfb.dtb \
+ mt8127-moose.dtb \
+ mt8135-evbp1.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512m.dts
+@@ -0,0 +1,18 @@
++/*
++ * Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
++ *
++ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++ */
++
++/dts-v1/;
++#include "mt7623a-unielec-u7623-02-emmc.dtsi"
++
++/ {
++ model = "UniElec U7623-02 eMMC (512M RAM)";
++ compatible = "unielec,u7623-02-emmc-512m", "unielec,u7623-02-emmc", "mediatek,mt7623";
++
++ memory@80000000 {
++ device_type = "memory";
++ reg = <0 0x80000000 0 0x20000000>;
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
+@@ -0,0 +1,340 @@
++/*
++ * Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
++ *
++ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++ */
++
++#include <dt-bindings/input/input.h>
++#include "mt7623.dtsi"
++#include "mt6323.dtsi"
++
++/ {
++ compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
++
++ aliases {
++ serial2 = &uart2;
++ };
++
++ chosen {
++ bootargs = "root=/dev/mmcblk0p2 rootfstype=squashfs,f2fs console=ttyS0,115200 blkdevparts=mmcblk0:3M@6M(recovery),256M@9M(root)";
++ stdout-path = "serial2:115200n8";
++ };
++
++ cpus {
++ cpu@0 {
++ proc-supply = <&mt6323_vproc_reg>;
++ };
++
++ cpu@1 {
++ proc-supply = <&mt6323_vproc_reg>;
++ };
++
++ cpu@2 {
++ proc-supply = <&mt6323_vproc_reg>;
++ };
++
++ cpu@3 {
++ proc-supply = <&mt6323_vproc_reg>;
++ };
++ };
++
++ reg_1p8v: regulator-1p8v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-1.8V";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ reg_3p3v: regulator-3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-3.3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ reg_5v: regulator-5v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-5V";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ pinctrl-names = "default";
++ pinctrl-0 = <&key_pins_a>;
++
++ factory {
++ label = "factory";
++ linux,code = <KEY_RESTART>;
++ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pins_unielec>;
++
++ led3 {
++ label = "u7623-01:green:led3";
++ gpios = <&pio 14 GPIO_ACTIVE_LOW>;
++ };
++
++ led4 {
++ label = "u7623-01:green:led4";
++ gpios = <&pio 15 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&crypto {
++ status = "okay";
++};
++
++ð {
++ status = "okay";
++
++ gmac0: mac@0 {
++ compatible = "mediatek,eth-mac";
++ reg = <0>;
++ phy-mode = "trgmii";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ pause;
++ };
++ };
++
++ mdio: mdio-bus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ mt7530: switch@0 {
++ compatible = "mediatek,mt7530";
++ };
++ };
++};
++
++&mt7530 {
++ compatible = "mediatek,mt7530";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ pinctrl-names = "default";
++ mediatek,mcm;
++ resets = <ðsys 2>;
++ reset-names = "mcm";
++ core-supply = <&mt6323_vpa_reg>;
++ io-supply = <&mt6323_vemc3v3_reg>;
++
++ dsa,mii-bus = <&mdio>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan0";
++ cpu = <&cpu_port0>;
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan1";
++ cpu = <&cpu_port0>;
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan2";
++ cpu = <&cpu_port0>;
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan3";
++ cpu = <&cpu_port0>;
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "wan";
++ cpu = <&cpu_port0>;
++ };
++
++ cpu_port0: port@6 {
++ reg = <6>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ phy-mode = "trgmii";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++};
++
++&mmc0 {
++ pinctrl-names = "default", "state_uhs";
++ pinctrl-0 = <&mmc0_pins_default>;
++ pinctrl-1 = <&mmc0_pins_uhs>;
++ status = "okay";
++ bus-width = <8>;
++ max-frequency = <50000000>;
++ cap-mmc-highspeed;
++ vmmc-supply = <®_3p3v>;
++ vqmmc-supply = <®_1p8v>;
++ non-removable;
++};
++
++&pio {
++ key_pins_a: keys-alt {
++ pins-keys {
++ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
++ <MT7623_PIN_257_GPIO257_FUNC_GPIO257>;
++ input-enable;
++ };
++ };
++
++ led_pins_unielec: leds-unielec {
++ pins-leds {
++ pinmux = <MT7623_PIN_14_GPIO14_FUNC_GPIO14>,
++ <MT7623_PIN_15_GPIO15_FUNC_GPIO15>;
++ };
++ };
++
++ mmc0_pins_default: mmc0default {
++ pins_cmd_dat {
++ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
++ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
++ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
++ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
++ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
++ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
++ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
++ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
++ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
++ input-enable;
++ bias-pull-up;
++ };
++
++ pins_clk {
++ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
++ bias-pull-down;
++ };
++
++ pins_rst {
++ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
++ bias-pull-up;
++ };
++ };
++
++ mmc0_pins_uhs: mmc0 {
++ pins_cmd_dat {
++ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
++ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
++ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
++ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
++ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
++ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
++ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
++ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
++ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
++ input-enable;
++ drive-strength = <MTK_DRIVE_2mA>;
++ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++ };
++
++ pins_clk {
++ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
++ drive-strength = <MTK_DRIVE_2mA>;
++ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
++ };
++
++ pins_rst {
++ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
++ bias-pull-up;
++ };
++ };
++
++ pcie_default: pcie_pin_default {
++ pins_cmd_dat {
++ pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
++ <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
++ bias-disable;
++ };
++ };
++};
++
++&pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm_pins_a>;
++ status = "okay";
++};
++
++&pwrap {
++ mt6323 {
++ mt6323led: led {
++ compatible = "mediatek,mt6323-led";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ led@0 {
++ reg = <0>;
++ label = "led0";
++ };
++ };
++ };
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart2_pins_b>;
++ status = "okay";
++};
++
++&usb1 {
++ vusb33-supply = <®_3p3v>;
++ vbus-supply = <®_3p3v>;
++ status = "okay";
++};
++
++&u3phy1 {
++ status = "okay";
++};
++
++&u3phy2 {
++ status = "okay";
++ mediatek,phy-switch = <&hifsys>;
++};
++
++&pcie {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie_default>;
++ status = "okay";
++
++ pcie@1,0 {
++ status = "okay";
++ };
++
++ pcie@2,0 {
++ status = "okay";
++ };
++};
++
++&pcie1_phy {
++ status = "okay";
++};
++