| From 7982b31fabc8cecdc45e7b123c76997c4a323ca8 Mon Sep 17 00:00:00 2001 |
| From: StanleyYP Wang <StanleyYP.Wang@mediatek.com> |
| Date: Wed, 17 May 2023 17:34:55 +0800 |
| Subject: [PATCH 4/7] wifi: mt76: mt7915: fix DFS CAC tx emission issue after |
| interface down up |
| |
| FW's channel state is set during the first wifi interface setup. If the switch reason for |
| setting the tx/rx path during second-time wifi interface setup is CH_SWITCH_NORMAL, |
| then the FW would perform runtime dpd channel calibration during DFS CAC, which leads to |
| tx emission. Therefore, in order to bypass tx calibration during DFS CAC, set the switch reason |
| to CH_SWITCH_DFS whenever chandef is set to DFS channel. |
| |
| Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> |
| --- |
| mt7915/mcu.c | 6 +++--- |
| 1 file changed, 3 insertions(+), 3 deletions(-) |
| |
| diff --git a/mt7915/mcu.c b/mt7915/mcu.c |
| index 87cc8d9..4ac08d0 100644 |
| --- a/mt7915/mcu.c |
| +++ b/mt7915/mcu.c |
| @@ -2732,12 +2732,12 @@ int mt7915_mcu_set_chan_info(struct mt7915_phy *phy, int cmd) |
| if (mt76_connac_spe_idx(phy->mt76->antenna_mask)) |
| req.tx_path_num = fls(phy->mt76->antenna_mask); |
| |
| - if (cmd == MCU_EXT_CMD(SET_RX_PATH) || |
| - dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR) |
| + if (dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR) |
| req.switch_reason = CH_SWITCH_NORMAL; |
| else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) |
| req.switch_reason = CH_SWITCH_SCAN_BYPASS_DPD; |
| - else if (!cfg80211_reg_can_beacon(phy->mt76->hw->wiphy, chandef, |
| + else if (cfg80211_chandef_valid(chandef) && |
| + !cfg80211_reg_can_beacon(phy->mt76->hw->wiphy, chandef, |
| NL80211_IFTYPE_AP)) |
| req.switch_reason = CH_SWITCH_DFS; |
| else |
| -- |
| 2.18.0 |
| |