[Add support WED ]
[Description]
Add support WED
1. sync from openwrt
[Release-log]
diff --git a/recipes-devtools/smp/files/smp-mt76.sh b/recipes-devtools/smp/files/smp-mt76.sh
index 819cf22..a03bd7c 100644
--- a/recipes-devtools/smp/files/smp-mt76.sh
+++ b/recipes-devtools/smp/files/smp-mt76.sh
@@ -12,6 +12,7 @@
WIFI_RADIO1=0
WIFI_RADIO2=0
WIFI_RADIO3=0
+WED_ENABLE=0
get_if_info()
{
@@ -51,10 +52,19 @@
fi
done;
+ WED_ENABLE_LIST=`cat /sys/module/mt7915e/parameters/wed_enable`
+ for v in $WED_ENABLE_LIST;
+ do
+ dbg2 "wed enable ori info $v"
+ if [[ $v == "Y" ]]; then
+ WED_ENABLE=1
+ fi
+ done;
dbg2 "NUM_WIFI_CARD = $NUM_WIFI_CARD"
dbg2 "platform wifi enable = $WIFI_RADIO1"
dbg2 "pcie1 wifi enable = $WIFI_RADIO2"
dbg2 "pcie2 wifi enable = $WIFI_RADIO3"
+ dbg2 "WED enable = $WED_ENABLE"
}
# $1: CPU#
@@ -85,17 +95,46 @@
wifi1_irq=
wifi2_irq=
wifi3_irq=
- #AX6000 AX7800
- if [[ "$WIFI_RADIO1" -eq "1" ]]; then
- wifi1_irq=245
- fi
- #AX7800
- if [[ "$WIFI_RADIO2" -eq "1" ]]; then
- wifi2_irq=246
- fi
- #AX7800
- if [[ "$WIFI_RADIO3" -eq "1" ]]; then
- wifi3_irq=247
+
+ if [[ "$WED_ENABLE" -eq "1" ]]; then
+ dbg2 "WED_ENABLE ON irq/iptable setting"
+ #TCP Binding
+ iptables -D FORWARD -p tcp -m conntrack --ctstate RELATED,ESTABLISHED -j FLOWOFFLOAD --hw
+ iptables -I FORWARD -p tcp -m conntrack --ctstate RELATED,ESTABLISHED -j FLOWOFFLOAD --hw
+ ip6tables -D FORWARD -p tcp -m conntrack --ctstate RELATED,ESTABLISHED -j FLOWOFFLOAD --hw
+ ip6tables -I FORWARD -p tcp -m conntrack --ctstate RELATED,ESTABLISHED -j FLOWOFFLOAD --hw
+ #UDP Binding
+ iptables -D FORWARD -p udp -j FLOWOFFLOAD --hw
+ iptables -I FORWARD -p udp -j FLOWOFFLOAD --hw
+ ip6tables -D FORWARD -p udp -j FLOWOFFLOAD --hw
+ ip6tables -I FORWARD -p udp -j FLOWOFFLOAD --hw
+
+ #AX6000 AX7800 - SOC
+ if [[ "$WIFI_RADIO1" -eq "1" ]]; then
+ wifi1_irq=238
+ fi
+ #AX7800 - PCIE0
+ if [[ "$WIFI_RADIO2" -eq "1" ]]; then
+ wifi2_irq=237
+ fi
+ #AX7800 - PCIE1
+ #if [[ "$WIFI_RADIO3" -eq "1" ]]; then
+ # wifi3_irq=239
+ #fi
+ else
+ dbg2 "WED_ENABLE OFF irq/iptable seting"
+ #AX6000 AX7800 - SOC
+ if [[ "$WIFI_RADIO1" -eq "1" ]]; then
+ wifi1_irq=245
+ fi
+ #AX7800 - PCIE0
+ if [[ "$WIFI_RADIO2" -eq "1" ]]; then
+ wifi2_irq=246
+ fi
+ #AX7800 - PCIE1
+ #if [[ "$WIFI_RADIO3" -eq "1" ]]; then
+ # wifi3_irq=247
+ #fi
fi
# Please update the CPU binding in each cases.
# CPU#_AFFINITY="add binding irq number here"