From b49a539e13572f6ab61834d307d5f9e84c03c929 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 3 Jul 2024 10:37:44 +0200
Subject: [PATCH 06/13] update nl80211.h

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 nl80211.h | 242 +++++++++++++++++++++++++++++-------------------------
 1 file changed, 130 insertions(+), 112 deletions(-)

diff --git a/nl80211.h b/nl80211.h
index f23ecbd..6ae3997 100644
--- a/nl80211.h
+++ b/nl80211.h
@@ -413,8 +413,8 @@
  *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
  *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
  *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ *	%NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
  *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
  *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
@@ -442,20 +442,15 @@
  *	stations connected and using at least that link as one of its links.
  *
  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
  *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
  * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- *	interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all mesh paths, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
  *	%NL80211_ATTR_IFINDEX.
  *
@@ -476,15 +471,15 @@
  *	after being queried by the kernel. CRDA replies by sending a regulatory
  *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
  *	current alpha2 if it found a match. It also provides
- * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * 	regulatory rule is a nested set of attributes  given by
- * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ *	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ *	regulatory rule is a nested set of attributes  given by
+ *	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ *	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
  * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * 	store this as a valid request and then query userspace for it.
+ *	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ *	store this as a valid request and then query userspace for it.
  *
  * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
  *	interface identified by %NL80211_ATTR_IFINDEX
@@ -574,31 +569,31 @@
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * 	has been changed and provides details of the request information
- * 	that caused the change such as who initiated the regulatory request
- * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * 	to (%NL80211_ATTR_REG_ALPHA2).
+ *	has been changed and provides details of the request information
+ *	that caused the change such as who initiated the regulatory request
+ *	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ *	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ *	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ *	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ *	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ *	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ *	to (%NL80211_ATTR_REG_ALPHA2).
  * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * 	has been found while world roaming thus enabling active scan or
- * 	any mode of operation that initiates TX (beacons) on a channel
- * 	where we would not have been able to do either before. As an example
- * 	if you are world roaming (regulatory domain set to world or if your
- * 	driver is using a custom world roaming regulatory domain) and while
- * 	doing a passive scan on the 5 GHz band you find an AP there (if not
- * 	on a DFS channel) you will now be able to actively scan for that AP
- * 	or use AP mode on your card on that same channel. Note that this will
- * 	never be used for channels 1-11 on the 2 GHz band as they are always
- * 	enabled world wide. This beacon hint is only sent if your device had
- * 	either disabled active scanning or beaconing on a channel. We send to
- * 	userspace the wiphy on which we removed a restriction from
- * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * 	the beacon hint was processed.
+ *	has been found while world roaming thus enabling active scan or
+ *	any mode of operation that initiates TX (beacons) on a channel
+ *	where we would not have been able to do either before. As an example
+ *	if you are world roaming (regulatory domain set to world or if your
+ *	driver is using a custom world roaming regulatory domain) and while
+ *	doing a passive scan on the 5 GHz band you find an AP there (if not
+ *	on a DFS channel) you will now be able to actively scan for that AP
+ *	or use AP mode on your card on that same channel. Note that this will
+ *	never be used for channels 1-11 on the 2 GHz band as they are always
+ *	enabled world wide. This beacon hint is only sent if your device had
+ *	either disabled active scanning or beaconing on a channel. We send to
+ *	userspace the wiphy on which we removed a restriction from
+ *	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ *	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ *	the beacon hint was processed.
  *
  * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
  *	This command is used both as a command (request to authenticate) and
@@ -1120,7 +1115,7 @@
  *	current configuration is not changed.  If it is present but
  *	set to zero, the configuration is changed to don't-care
  *	(i.e. the device can decide what to do).
- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.
  *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
  *	%NL80211_ATTR_COOKIE.
  *
@@ -1715,21 +1710,21 @@ enum nl80211_commands {
  *	(see &enum nl80211_plink_action).
  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ *	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
  *	&enum nl80211_mpath_info.
  *
  * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
  *      &enum nl80211_mntr_flags.
  *
  * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * 	current regulatory domain should be set to or is already set to.
- * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * 	to query the CRDA to retrieve one regulatory domain. This attribute can
- * 	also be used by userspace to query the kernel for the currently set
- * 	regulatory domain. We chose an alpha2 as that is also used by the
- * 	IEEE-802.11 country information element to identify a country.
- * 	Users can also simply ask the wireless core to set regulatory domain
- * 	to a specific alpha2.
+ *	current regulatory domain should be set to or is already set to.
+ *	For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ *	to query the CRDA to retrieve one regulatory domain. This attribute can
+ *	also be used by userspace to query the kernel for the currently set
+ *	regulatory domain. We chose an alpha2 as that is also used by the
+ *	IEEE-802.11 country information element to identify a country.
+ *	Users can also simply ask the wireless core to set regulatory domain
+ *	to a specific alpha2.
  * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
  *	rules.
  *
@@ -1772,9 +1767,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_BSS: scan result BSS
  *
  * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ *	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
  * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
  *
  * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
  *	an array of command numbers (i.e. a mapping index to command number)
@@ -1793,15 +1788,15 @@ enum nl80211_commands {
  *	a u32
  *
  * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _before_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _before_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
  * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _after_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _after_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
  *
  * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
  *	cipher suites
@@ -1862,12 +1857,6 @@ enum nl80211_commands {
  *	that protected APs should be used. This is also used with NEW_BEACON to
  *	indicate that the BSS is to use protection.
  *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- *	to indicate which unicast key ciphers will be used with the connection
- *	(an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which group key cipher will be used with the connection (a
- *	u32).
  * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
  *	indicate which WPA version(s) the AP we want to associate with is using
  *	(a u32 with flags from &enum nl80211_wpa_versions).
@@ -1898,6 +1887,7 @@ enum nl80211_commands {
  *	with %NL80211_KEY_* sub-attributes
  *
  * @NL80211_ATTR_PID: Process ID of a network namespace.
+ * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.
  *
  * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
  *	dumps. This number increases whenever the object list being
@@ -1952,6 +1942,7 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *	acknowledged by the recipient.
+ * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)
  *
  * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
  *
@@ -2149,6 +2140,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
  *      this feature during association. This is a flag attribute.
  *	Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
  *      ATTR_HT_CAPABILITY to which attention should be paid.
  *      Currently, only mac80211 NICs support this feature.
@@ -2158,6 +2152,12 @@ enum nl80211_commands {
  *      All values are treated as suggestions and may be ignored
  *      by the driver as required.  The actual values may be seen in
  *      the station debugfs ht_caps file.
+ * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the
+ *      ATTR_VHT_CAPABILITY to which attention should be paid.
+ *      Currently, only mac80211 NICs support this feature.
+ *      All values are treated as suggestions and may be ignored
+ *      by the driver as required.  The actual values may be seen in
+ *      the station debugfs vht_caps file.
  *
  * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
  *    abides to when initiating radiation on DFS channels. A country maps
@@ -2416,7 +2416,7 @@ enum nl80211_commands {
  *	scheduled scan is started.  Or the delay before a WoWLAN
  *	net-detect scan is started, counting from the moment the
  *	system is suspended.  This value is a u32, in seconds.
-
+ *
  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
  *      is operating in an indoor environment.
  *
@@ -3565,7 +3565,7 @@ enum nl80211_sta_flags {
  * enum nl80211_sta_p2p_ps_status - station support of P2P PS
  *
  * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
  * @NUM_NL80211_P2P_PS_STATUS: number of values
  */
 enum nl80211_sta_p2p_ps_status {
@@ -3603,9 +3603,9 @@ enum nl80211_he_gi {
 
 /**
  * enum nl80211_he_ltf - HE long training field
- * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
- * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
- * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
+ * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec
+ * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec
+ * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec
  */
 enum nl80211_he_ltf {
 	NL80211_RATE_INFO_HE_1XLTF,
@@ -3720,7 +3720,7 @@ enum nl80211_eht_ru_alloc {
  * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
  *	(u8, see &enum nl80211_he_gi)
  * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
+ * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then
  *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
  * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
  * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
@@ -3823,7 +3823,7 @@ enum nl80211_sta_bss_param {
  *	(u64, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * 	containing info as possible, see &enum nl80211_rate_info
+ *	containing info as possible, see &enum nl80211_rate_info
  * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
  *	(u32, from this station)
  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
@@ -3852,8 +3852,8 @@ enum nl80211_sta_bss_param {
  *	Contains a nested array of signal strength attributes (u8, dBm)
  * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
  *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- *	802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also
+ *	the 802.11 header (u32, kbps)
  * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
  *	(u64)
  * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
@@ -4039,7 +4039,7 @@ enum nl80211_mpath_flags {
  * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
  * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
  * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * 	&enum nl80211_mpath_flags;
+ *	&enum nl80211_mpath_flags;
  * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
  * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
  * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
@@ -4179,7 +4179,7 @@ enum nl80211_band_attr {
  * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
  * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
  * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
- * @nl80211_WMMR_MAX: highest possible wmm rule.
+ * @NL80211_WMMR_MAX: highest possible wmm rule.
  * @__NL80211_WMMR_LAST: Internal use.
  */
 enum nl80211_wmm_rule {
@@ -4201,8 +4201,9 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
  *	regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
- * 	are permitted on this channel, this includes sending probe
- * 	requests, or modes of operation that require beaconing.
+ *	are permitted on this channel, this includes sending probe
+ *	requests, or modes of operation that require beaconing.
+ * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR
  * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
@@ -4276,6 +4277,8 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
  *	mode despite other (regulatory) restrictions, even if the channel is
  *	otherwise completely disabled.
+ * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a
+ *	very low power (VLP) AP, despite being NO_IR.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4319,6 +4322,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
 	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
 	NL80211_FREQUENCY_ATTR_CAN_MONITOR,
+	NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4357,16 +4361,16 @@ enum nl80211_bitrate_attr {
 };
 
 /**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request
  * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * 	regulatory domain.
+ *	regulatory domain.
  * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * 	regulatory domain.
+ *	regulatory domain.
  * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * 	wireless core it thinks its knows the regulatory domain we should be in.
+ *	wireless core it thinks its knows the regulatory domain we should be in.
  * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 	802.11 country information element with regulatory information it
- * 	thinks we should consider. cfg80211 only processes the country
+ *	802.11 country information element with regulatory information it
+ *	thinks we should consider. cfg80211 only processes the country
  *	code from the IE, and relies on the regulatory domain information
  *	structure passed by userspace (CRDA) from our wireless-regdb.
  *	If a channel is enabled but the country code indicates it should
@@ -4385,11 +4389,11 @@ enum nl80211_reg_initiator {
  *	to a specific country. When this is set you can count on the
  *	ISO / IEC 3166 alpha2 country code being valid.
  * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * 	domain.
+ *	domain.
  * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * 	driver specific world regulatory domain. These do not apply system-wide
- * 	and are only applicable to the individual devices which have requested
- * 	them to be applied.
+ *	driver specific world regulatory domain. These do not apply system-wide
+ *	and are only applicable to the individual devices which have requested
+ *	them to be applied.
  * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
  *	of an intersection between two regulatory domains -- the previously
  *	set regulatory domain on the system and the last accepted regulatory
@@ -4406,21 +4410,21 @@ enum nl80211_reg_type {
  * enum nl80211_reg_rule_attr - regulatory rule attributes
  * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * 	considerations for a given frequency range. These are the
- * 	&enum nl80211_reg_rule_flags.
+ *	considerations for a given frequency range. These are the
+ *	&enum nl80211_reg_rule_flags.
  * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * 	rule in KHz. This is not a center of frequency but an actual regulatory
- * 	band edge.
+ *	rule in KHz. This is not a center of frequency but an actual regulatory
+ *	band edge.
  * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * 	in KHz. This is not a center a frequency but an actual regulatory
- * 	band edge.
+ *	in KHz. This is not a center a frequency but an actual regulatory
+ *	band edge.
  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
  *	frequency range, in KHz.
  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * 	for a given frequency range. The value is in mBi (100 * dBi).
- * 	If you don't have one then don't send this.
+ *	for a given frequency range. The value is in mBi (100 * dBi).
+ *	If you don't have one then don't send this.
  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * 	a given frequency range. The value is in mBm (100 * dBm).
+ *	a given frequency range. The value is in mBm (100 * dBm).
  * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  *	If not present or 0 default CAC time will be used.
  * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
@@ -4507,8 +4511,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
  * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * 	this includes probe requests or modes of operation that require
- * 	beaconing.
+ *	this includes probe requests or modes of operation that require
+ *	beaconing.
+ * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR
  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
  *	base on contiguous rules and wider channels will be allowed to cross
  *	multiple contiguous/overlapping frequency ranges.
@@ -4522,11 +4527,13 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
  * @NL80211_RRF_PSD: Ruleset has power spectral density value
  * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
-	peer-to-peer or adhoc communication under the control of a DFS master
-	which operates on the same channel (FCC-594280 D01 Section B.3).
-	Should be used together with %NL80211_RRF_DFS only.
+ *	peer-to-peer or adhoc communication under the control of a DFS master
+ *	which operates on the same channel (FCC-594280 D01 Section B.3).
+ *	Should be used together with %NL80211_RRF_DFS only.
  * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
  * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
+ * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted
+ *	despite NO_IR configuration.
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4551,6 +4558,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
 	NL80211_RRF_NO_6GHZ_VLP_CLIENT	= 1<<22,
 	NL80211_RRF_NO_6GHZ_AFC_CLIENT	= 1<<23,
+	NL80211_RRF_ALLOW_6GHZ_VLP_AP	= 1<<24,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -4707,8 +4715,8 @@ enum nl80211_mntr_flags {
  *	alternate between Active and Doze states, but may not wake up
  *	for neighbor's beacons.
  *
- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
- * @NL80211_MESH_POWER_MAX - highest possible power save level
+ * @__NL80211_MESH_POWER_AFTER_LAST: internal use
+ * @NL80211_MESH_POWER_MAX: highest possible power save level
  */
 
 enum nl80211_mesh_power_mode {
@@ -5728,7 +5736,7 @@ struct nl80211_pattern_support {
  *	"TCP connection wakeup" for more details. This is a nested attribute
  *	containing the exact information for establishing and keeping alive
  *	the TCP connection.
- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the
  *	wakeup packet was received on the TCP connection
  * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
  *	TCP connection was lost or failed to be established
@@ -6077,7 +6085,7 @@ enum nl80211_plink_state {
  * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
  * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
  */
-enum plink_actions {
+enum nl80211_plink_action {
 	NL80211_PLINK_ACTION_NO_ACTION,
 	NL80211_PLINK_ACTION_OPEN,
 	NL80211_PLINK_ACTION_BLOCK,
@@ -6404,6 +6412,7 @@ enum nl80211_feature_flags {
  *	receiving control port frames over nl80211 instead of the netdevice.
  * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
  *	(average) ACK signal strength reporting.
+ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID
  * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
  *      TXQs.
  * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
@@ -6787,6 +6796,8 @@ enum nl80211_acl_policy {
  * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
  * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
  *	turn on other antennas after CTS/RTS).
+ * @__NL80211_SMPS_AFTER_LAST: internal
+ * @NL80211_SMPS_MAX: highest used enumeration
  */
 enum nl80211_smps_mode {
 	NL80211_SMPS_OFF,
@@ -7008,6 +7019,8 @@ enum nl80211_bss_select_attr {
  * @NL80211_NAN_FUNC_PUBLISH: function is publish
  * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
  * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use
+ * @NL80211_NAN_FUNC_MAX_TYPE: internal use
  */
 enum nl80211_nan_function_type {
 	NL80211_NAN_FUNC_PUBLISH,
@@ -7168,7 +7181,7 @@ enum nl80211_nan_match_attributes {
 };
 
 /**
- * nl80211_external_auth_action - Action to perform with external
+ * enum nl80211_external_auth_action - Action to perform with external
  *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
  * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
  * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
@@ -7186,7 +7199,7 @@ enum nl80211_external_auth_action {
  * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
  *	(9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
  *	i.e. starting with the measurement token
- * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
+ * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element
  *	(9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
  *	i.e. starting with the measurement token
  * @__NL80211_FTM_RESP_ATTR_LAST: Internal
@@ -7829,6 +7842,7 @@ enum nl80211_sae_pwe_mechanism {
  *
  * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
  *
+ * @NUM_NL80211_SAR_TYPE: internal
  */
 enum nl80211_sar_type {
 	NL80211_SAR_TYPE_POWER,
@@ -7842,6 +7856,8 @@ enum nl80211_sar_type {
 /**
  * enum nl80211_sar_attrs - Attributes for SAR spec
  *
+ * @__NL80211_SAR_ATTR_INVALID: Invalid
+ *
  * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
  *
  * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
@@ -7873,6 +7889,8 @@ enum nl80211_sar_attrs {
 /**
  * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
  *
+ * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid
+ *
  * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
  *	power limit value in units of 0.25 dBm if type is
  *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
-- 
2.18.0