blob: f957f0ddbd64e5e1ccc04806799ac8f68815da23 [file] [log] [blame]
Jayanth Dodderi Chidanand9461a892022-01-17 18:57:17 +00001#
Govindraj Raja0386e312023-08-17 10:41:48 -05002# Copyright (c) 2022-2023, Arm Limited. All rights reserved.
Jayanth Dodderi Chidanand9461a892022-01-17 18:57:17 +00003#
4# SPDX-License-Identifier: BSD-3-Clause
5#
6
Govindraj Raja0386e312023-08-17 10:41:48 -05007# This file lists all of the architectural features, and initializes
8# and enables them based on the configured architecture version.
9
10# This file follows the following format:
Govindraj Raja16b11372023-10-09 13:56:06 -050011# - Enable mandatory feature if applicable to an Arch Version.
12# - By default disable any mandatory features if they have not been defined yet.
Govindraj Raja0386e312023-08-17 10:41:48 -050013# - Disable or enable any optional feature this would be enabled/disabled if needed by platform.
14
15#
16################################################################################
Govindraj Raja16b11372023-10-09 13:56:06 -050017# Enable Mandatory features based on Arch versions.
18################################################################################
19#
20
21# Enable the features which are mandatory from ARCH version 8.1 and upwards.
22ifeq "8.1" "$(word 1, $(sort 8.1 $(ARM_ARCH_MAJOR).$(ARM_ARCH_MINOR)))"
23ENABLE_FEAT_PAN := 1
24ENABLE_FEAT_VHE := 1
25endif
26
27# Enable the features which are mandatory from ARCH version 8.2 and upwards.
28ifeq "8.2" "$(word 1, $(sort 8.2 $(ARM_ARCH_MAJOR).$(ARM_ARCH_MINOR)))"
29ENABLE_FEAT_RAS := 1
30endif
31
32# Enable the features which are mandatory from ARCH version 8.4 and upwards.
33ifeq "8.4" "$(word 1, $(sort 8.4 $(ARM_ARCH_MAJOR).$(ARM_ARCH_MINOR)))"
34ENABLE_FEAT_SEL2 := 1
35ENABLE_TRF_FOR_NS := 1
36ENABLE_FEAT_DIT := 1
37endif
38
39# Enable the features which are mandatory from ARCH version 8.5 and upwards.
40ifeq "8.5" "$(word 1, $(sort 8.5 $(ARM_ARCH_MAJOR).$(ARM_ARCH_MINOR)))"
41ENABLE_FEAT_RNG := 1
42ENABLE_FEAT_SB := 1
43
44# Enable Memory tagging, Branch Target Identification for aarch64 only.
45ifeq ($(ARCH), aarch64)
46 mem_tag_arch_support := yes
47endif #(ARCH=aarch64)
48
49endif
50
51# Enable the features which are mandatory from ARCH version 8.6 and upwards.
52ifeq "8.6" "$(word 1, $(sort 8.6 $(ARM_ARCH_MAJOR).$(ARM_ARCH_MINOR)))"
53ENABLE_FEAT_ECV := 1
54ENABLE_FEAT_FGT := 1
55endif
56
57# Enable the features which are mandatory from ARCH version 8.7 and upwards.
58ifeq "8.7" "$(word 1, $(sort 8.7 $(ARM_ARCH_MAJOR).$(ARM_ARCH_MINOR)))"
59ENABLE_FEAT_HCX := 1
60endif
61
62# Enable the features which are mandatory from ARCH version 8.9 and upwards.
63ifeq "8.9" "$(word 1, $(sort 8.9 $(ARM_ARCH_MAJOR).$(ARM_ARCH_MINOR)))"
64ENABLE_FEAT_TCR2 := 1
65endif
66
67#
68################################################################################
Govindraj Raja0386e312023-08-17 10:41:48 -050069# Set mandatory features by default to zero.
70################################################################################
71#
72
73#----
74# 8.1
75#----
76
77# Flag to enable access to Privileged Access Never bit of PSTATE.
Govindraj Raja16b11372023-10-09 13:56:06 -050078ENABLE_FEAT_PAN ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -050079
80# Flag to enable Virtualization Host Extensions.
Govindraj Raja16b11372023-10-09 13:56:06 -050081ENABLE_FEAT_VHE ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -050082
83#----
84# 8.2
85#----
86
87# Enable RAS Support.
Govindraj Raja16b11372023-10-09 13:56:06 -050088ENABLE_FEAT_RAS ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -050089
90#----
Govindraj Raja16b11372023-10-09 13:56:06 -050091# 8.3
92#----
93
94# Flag to enable Pointer Authentication. Internal flag not meant for
95# direct setting. Use BRANCH_PROTECTION to enable PAUTH.
96ENABLE_PAUTH ?= 0
97
98# Include pointer authentication (ARMv8.3-PAuth) registers in cpu context. This
99# must be set to 1 if the platform wants to use this feature in the Secure
100# world. It is not necessary for use in the Non-secure world.
101CTX_INCLUDE_PAUTH_REGS ?= 0
102
103
104#----
Govindraj Raja0386e312023-08-17 10:41:48 -0500105# 8.4
106#----
107
108# Flag to enable Secure EL-2 feature.
Govindraj Raja16b11372023-10-09 13:56:06 -0500109ENABLE_FEAT_SEL2 ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500110
Govindraj Raja0386e312023-08-17 10:41:48 -0500111# By default, disable trace filter control register access to lower non-secure
112# exception levels, i.e. NS-EL2, or NS-EL1 if NS-EL2 is implemented, but
113# trace filter control register access is unused if FEAT_TRF is implemented.
Govindraj Raja16b11372023-10-09 13:56:06 -0500114ENABLE_TRF_FOR_NS ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500115
116# Flag to enable Data Independent Timing instructions.
Govindraj Raja16b11372023-10-09 13:56:06 -0500117ENABLE_FEAT_DIT ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500118
119#----
120# 8.5
121#----
122
Govindraj Raja16b11372023-10-09 13:56:06 -0500123# Flag to enable Branch Target Identification.
124# Internal flag not meant for direct setting.
125# Use BRANCH_PROTECTION to enable BTI.
126ENABLE_BTI ?= 0
127
Govindraj Raja0386e312023-08-17 10:41:48 -0500128# Flag to enable access to the Random Number Generator registers.
Govindraj Raja16b11372023-10-09 13:56:06 -0500129ENABLE_FEAT_RNG ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500130
131# Flag to enable Speculation Barrier Instruction.
Govindraj Raja16b11372023-10-09 13:56:06 -0500132ENABLE_FEAT_SB ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500133
Govindraj Raja0386e312023-08-17 10:41:48 -0500134#----
135# 8.6
136#----
137
138# Flag to enable access to the CNTPOFF_EL2 register.
Govindraj Raja16b11372023-10-09 13:56:06 -0500139ENABLE_FEAT_ECV ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500140
141# Flag to enable access to the HDFGRTR_EL2 register.
Govindraj Raja16b11372023-10-09 13:56:06 -0500142ENABLE_FEAT_FGT ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500143
144#----
145# 8.7
146#----
147
148# Flag to enable access to the HCRX_EL2 register by setting SCR_EL3.HXEn.
Govindraj Raja16b11372023-10-09 13:56:06 -0500149ENABLE_FEAT_HCX ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500150
151#----
152# 8.9
153#----
154
155# Flag to enable access to TCR2 (FEAT_TCR2).
Govindraj Raja16b11372023-10-09 13:56:06 -0500156ENABLE_FEAT_TCR2 ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500157
158#
159################################################################################
Govindraj Raja0386e312023-08-17 10:41:48 -0500160# Optional Features defaulted to 0 or 2, if they are not enabled from
161# build option. Can also be disabled or enabled by platform if needed.
162################################################################################
163#
164
165#----
166# 8.0
167#----
168
169# Flag to enable CSV2_2 extension.
170ENABLE_FEAT_CSV2_2 ?= 0
171
172# By default, disable access of trace system registers from NS lower
173# ELs i.e. NS-EL2, or NS-EL1 if NS-EL2 implemented but unused if
174# system register trace is implemented. This feature is available if
175# trace unit such as ETMv4.x, This feature is OPTIONAL and is only
176# permitted in Armv8 implementations.
177ENABLE_SYS_REG_TRACE_FOR_NS ?= 0
178
179#----
180# 8.2
181#----
182
183# Build option to enable/disable the Statistical Profiling Extension,
184# keep it enabled by default for AArch64.
185ifeq (${ARCH},aarch64)
Govindraj Raja28b525c2023-09-20 15:31:45 -0500186 ENABLE_SPE_FOR_NS ?= 2
Govindraj Raja0386e312023-08-17 10:41:48 -0500187else ifeq (${ARCH},aarch32)
Govindraj Raja399541a2023-10-17 08:13:03 -0500188 ifneq ($(or $(ENABLE_SPE_FOR_NS),0),0)
Govindraj Raja28b525c2023-09-20 15:31:45 -0500189 $(error ENABLE_SPE_FOR_NS is not supported for AArch32)
190 else
191 ENABLE_SPE_FOR_NS := 0
192 endif
Govindraj Raja0386e312023-08-17 10:41:48 -0500193endif
194
195# Enable SVE for non-secure world by default.
196ifeq (${ARCH},aarch64)
Govindraj Raja28b525c2023-09-20 15:31:45 -0500197 ENABLE_SVE_FOR_NS ?= 2
Govindraj Raja0386e312023-08-17 10:41:48 -0500198# SVE is only supported on AArch64 so disable it on AArch32.
199else ifeq (${ARCH},aarch32)
Govindraj Raja399541a2023-10-17 08:13:03 -0500200 ifneq ($(or $(ENABLE_SVE_FOR_NS),0),0)
Govindraj Raja28b525c2023-09-20 15:31:45 -0500201 $(error ENABLE_SVE_FOR_NS is not supported for AArch32)
202 else
203 ENABLE_SVE_FOR_NS := 0
204 endif
Govindraj Raja0386e312023-08-17 10:41:48 -0500205endif
206
207#----
208# 8.4
209#----
210
211# Feature flags for supporting Activity monitor extensions.
212ENABLE_FEAT_AMU ?= 0
213ENABLE_AMU_AUXILIARY_COUNTERS ?= 0
214ENABLE_AMU_FCONF ?= 0
215AMU_RESTRICT_COUNTERS ?= 0
216
217# Build option to enable MPAM for lower ELs.
Arvind Ram Prakashab28d4b2023-10-11 12:10:56 -0500218# Enabling it by default
219ifeq (${ARCH},aarch64)
220 ENABLE_FEAT_MPAM ?= 2
221else ifeq (${ARCH},aarch32)
222 ifdef ENABLE_FEAT_MPAM
223 $(error ENABLE_FEAT_MPAM is not supported for AArch32)
224 else
225 ENABLE_FEAT_MPAM := 0
226 endif
227endif
Govindraj Raja0386e312023-08-17 10:41:48 -0500228
Govindraj Raja3748d902023-09-19 08:43:16 -0500229# Include nested virtualization control (Armv8.4-NV) registers in cpu context.
230# This must be set to 1 if architecture implements Nested Virtualization
231# Extension and platform wants to use this feature in the Secure world.
232CTX_INCLUDE_NEVE_REGS ?= 0
233
Govindraj Raja0386e312023-08-17 10:41:48 -0500234#----
235# 8.5
236#----
237
238# Flag to enable support for EL3 trapping of reads of the RNDR and RNDRRS
239# registers, by setting SCR_EL3.TRNDR.
240ENABLE_FEAT_RNG_TRAP ?= 0
241
242# Include Memory Tagging Extension registers in cpu context. This must be set
243# to 1 if the platform wants to use this feature in the Secure world and MTE is
244# enabled at ELX.
245CTX_INCLUDE_MTE_REGS ?= 0
246
247#----
248# 8.6
249#----
250
251# Flag to enable AMUv1p1 extension.
252ENABLE_FEAT_AMUv1p1 ?= 0
253
254# Flag to enable delayed trapping of WFE instruction (FEAT_TWED).
255ENABLE_FEAT_TWED ?= 0
256
257# In v8.6+ platforms with delayed trapping of WFE being supported
258# via FEAT_TWED, this flag takes the delay value to be set in the
259# SCR_EL3.TWEDEL(4bit) field, when FEAT_TWED is implemented.
260# By default it takes 0, and need to be updated by the platforms.
261TWED_DELAY ?= 0
262
263# Disable MTPMU if FEAT_MTPMU is supported.
264DISABLE_MTPMU ?= 0
265
266#----
267# 8.9
268#----
269
270# Flag to enable NoTagAccess memory region attribute for stage 2 of translation.
271ENABLE_FEAT_MTE_PERM ?= 0
272
273# Flag to enable access to Stage 2 Permission Indirection (FEAT_S2PIE).
274ENABLE_FEAT_S2PIE ?= 0
275
276# Flag to enable access to Stage 1 Permission Indirection (FEAT_S1PIE).
277ENABLE_FEAT_S1PIE ?= 0
278
279# Flag to enable access to Stage 2 Permission Overlay (FEAT_S2POE).
280ENABLE_FEAT_S2POE ?= 0
281
282# Flag to enable access to Stage 1 Permission Overlay (FEAT_S1POE).
283ENABLE_FEAT_S1POE ?= 0
284
285#----
286# 9.0
287#----
288
289# Flag to enable Realm Management Extension (FEAT_RME).
290ENABLE_RME ?= 0
291
292# Scalable Matrix Extension for non-secure world.
293ENABLE_SME_FOR_NS ?= 0
294
295# Scalable Vector Extension for secure world.
296ENABLE_SVE_FOR_SWD ?= 0
297
298# By default, disable access of trace buffer control registers from NS
299# lower ELs i.e. NS-EL2, or NS-EL1 if NS-EL2 implemented but unused
300# if FEAT_TRBE is implemented.
301# Note FEAT_TRBE is only supported on AArch64 - therefore do not enable in
302# AArch32.
303ifeq (${ARCH},aarch64)
Govindraj Raja28b525c2023-09-20 15:31:45 -0500304 ENABLE_TRBE_FOR_NS ?= 0
Govindraj Raja0386e312023-08-17 10:41:48 -0500305else ifeq (${ARCH},aarch32)
Govindraj Raja399541a2023-10-17 08:13:03 -0500306 ifneq ($(or $(ENABLE_TRBE_FOR_NS),0),0)
307 $(error ENABLE_TRBE_FOR_NS is not supported for AArch32)
Govindraj Raja28b525c2023-09-20 15:31:45 -0500308 else
Govindraj Raja399541a2023-10-17 08:13:03 -0500309 ENABLE_TRBE_FOR_NS := 0
Govindraj Raja28b525c2023-09-20 15:31:45 -0500310 endif
Govindraj Raja0386e312023-08-17 10:41:48 -0500311endif
312
313#----
314# 9.2
315#----
316
317# Scalable Matrix Extension version 2 for non-secure world.
318ENABLE_SME2_FOR_NS ?= 0
319
320# Scalable Matrix Extension for secure world.
321ENABLE_SME_FOR_SWD ?= 0
322
323# By default, disable access to branch record buffer control registers from NS
324# lower ELs i.e. NS-EL2, or NS-EL1 if NS-EL2 implemented but unused
325# if FEAT_BRBE is implemented.
326ENABLE_BRBE_FOR_NS ?= 0
327
328#----
329#9.4
330#----
331
332# Flag to enable access to Guarded Control Stack (FEAT_GCS).
333ENABLE_FEAT_GCS ?= 0