diff --git a/drivers/marvell/comphy/comphy-cp110.h b/drivers/marvell/comphy/comphy-cp110.h
index 27ddcd0..9b10619 100644
--- a/drivers/marvell/comphy/comphy-cp110.h
+++ b/drivers/marvell/comphy/comphy-cp110.h
@@ -355,6 +355,14 @@
 #define HPIPE_CDR_LOCK_DET_EN_MASK		\
 			(0x1 << HPIPE_CDR_LOCK_DET_EN_OFFSET)
 
+#define HPIPE_SYNC_PATTERN_REG			0x090
+#define HPIPE_SYNC_PATTERN_TXD_INV_OFFSET	10
+#define HPIPE_SYNC_PATTERN_TXD_INV_MASK	\
+	(0x1 << HPIPE_SYNC_PATTERN_TXD_INV_OFFSET)
+#define HPIPE_SYNC_PATTERN_RXD_INV_OFFSET	11
+#define HPIPE_SYNC_PATTERN_RXD_INV_MASK	\
+	(0x1 << HPIPE_SYNC_PATTERN_RXD_INV_OFFSET)
+
 #define HPIPE_INTERFACE_REG			0x94
 #define HPIPE_INTERFACE_GEN_MAX_OFFSET		10
 #define HPIPE_INTERFACE_GEN_MAX_MASK		\
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
index 012197e..e9dcfb8 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.c
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -323,12 +323,33 @@
 	return ret;
 }
 
+static void mvebu_cp110_polarity_invert(uintptr_t addr, uint8_t phy_polarity_invert)
+{
+	uint32_t mask, data;
+
+	/* Set RX / TX polarity */
+	data = mask = 0x0U;
+	if ((phy_polarity_invert & COMPHY_POLARITY_TXD_INVERT) != 0) {
+		data |= (1 << HPIPE_SYNC_PATTERN_TXD_INV_OFFSET);
+		mask |= HPIPE_SYNC_PATTERN_TXD_INV_MASK;
+		debug("%s: inverting TX polarity\n", __func__);
+	}
+
+	if ((phy_polarity_invert & COMPHY_POLARITY_RXD_INVERT) != 0) {
+		data |= (1 << HPIPE_SYNC_PATTERN_RXD_INV_OFFSET);
+		mask |= HPIPE_SYNC_PATTERN_RXD_INV_MASK;
+		debug("%s: inverting RX polarity\n", __func__);
+	}
+
+	reg_set(addr, data, mask);
+}
+
 static int mvebu_cp110_comphy_sata_power_on(uint64_t comphy_base,
 				     uint8_t comphy_index, uint32_t comphy_mode)
 {
 	uintptr_t hpipe_addr, sd_ip_addr, comphy_addr;
 	uint32_t mask, data;
-	uint8_t ap_nr, cp_nr;
+	uint8_t ap_nr, cp_nr, phy_polarity_invert;
 	int ret = 0;
 
 	debug_enter();
@@ -338,6 +359,7 @@
 	const struct sata_params *sata_static_values =
 			&sata_static_values_tab[ap_nr][cp_nr][comphy_index];
 
+	phy_polarity_invert = sata_static_values->polarity_invert;
 
 	/* configure phy selector for SATA */
 	mvebu_cp110_comphy_set_phy_selector(comphy_base,
@@ -629,6 +651,11 @@
 	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
 		0x0 << HPIPE_PWR_CTR_RST_DFE_OFFSET,
 		HPIPE_PWR_CTR_RST_DFE_MASK);
+
+	if (phy_polarity_invert != 0)
+		mvebu_cp110_polarity_invert(hpipe_addr + HPIPE_SYNC_PATTERN_REG,
+					    phy_polarity_invert);
+
 	/* SW reset for interrupt logic */
 	reg_set(hpipe_addr + HPIPE_PWR_CTR_REG,
 		0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET,
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.h b/drivers/marvell/comphy/phy-comphy-cp110.h
index 63aef12..1dc3aa2 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.h
+++ b/drivers/marvell/comphy/phy-comphy-cp110.h
@@ -76,6 +76,8 @@
 	uint8_t g2_rx_selmupi;
 	uint8_t g3_rx_selmupi;
 
+	uint8_t polarity_invert;
+
 	_Bool valid;
 };
 
@@ -89,3 +91,7 @@
 				       uint8_t comphy_index);
 int mvebu_cp110_comphy_digital_reset(uint64_t comphy_base, uint8_t comphy_index,
 				     uint32_t comphy_mode, uint32_t command);
+
+#define COMPHY_POLARITY_NO_INVERT	0
+#define COMPHY_POLARITY_TXD_INVERT	1
+#define COMPHY_POLARITY_RXD_INVERT	2
diff --git a/drivers/marvell/comphy/phy-default-porting-layer.h b/drivers/marvell/comphy/phy-default-porting-layer.h
index b3ad7eb..28bfcf2 100644
--- a/drivers/marvell/comphy/phy-default-porting-layer.h
+++ b/drivers/marvell/comphy/phy-default-porting-layer.h
@@ -45,6 +45,7 @@
 		.g3_rx_selmupf = 0x2,
 		.g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
 		.g3_rx_selmupi = 0x2,
+		.polarity_invert = COMPHY_POLARITY_NO_INVERT,
 		.valid = 0x1
 	},
 };
diff --git a/plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h b/plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h
index abd85b5..f080029 100644
--- a/plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h
+++ b/plat/marvell/armada/a8k/a80x0/board/phy-porting-layer.h
@@ -92,6 +92,7 @@
 			  .g3_rx_selmupf = 0x2,
 			  .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
 			  .g3_rx_selmupi = 0x2,
+			  .polarity_invert = COMPHY_POLARITY_NO_INVERT,
 			  .valid = 0x1
 			}, /* Comphy1 */
 			{ 0 }, /* Comphy2 */
@@ -116,6 +117,7 @@
 			 .g3_rx_selmupf = 0x2,
 			 .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
 			 .g3_rx_selmupi = 0x2,
+			 .polarity_invert = COMPHY_POLARITY_NO_INVERT,
 			 .valid = 0x1
 			}, /* Comphy3 */
 			{ 0 }, /* Comphy4 */
@@ -146,6 +148,7 @@
 			  .g3_rx_selmupf = 0x2,
 			  .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
 			  .g3_rx_selmupi = 0x2,
+			  .polarity_invert = COMPHY_POLARITY_NO_INVERT,
 			  .valid = 0x1
 			}, /* Comphy1 */
 			{ 0 }, /* Comphy2 */
@@ -170,6 +173,7 @@
 			  .g3_rx_selmupf = 0x2,
 			  .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
 			  .g3_rx_selmupi = 0x2,
+			  .polarity_invert = COMPHY_POLARITY_NO_INVERT,
 			  .valid = 0x1
 			}, /* Comphy3 */
 			{ 0 }, /* Comphy4 */
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h b/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h
index a866055..8244658 100644
--- a/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h
@@ -131,6 +131,7 @@
 		.g3_rx_selmupf = 0x2,
 		.g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
 		.g3_rx_selmupi = 0x2,
+		.polarity_invert = COMPHY_POLARITY_NO_INVERT,
 		.valid = 0x1
 	},
 };