arm: Shorten the Firmware Update (FWU) process
The watchdog is configured with a default value of 256 seconds in order
to implement the Trusted Board Boot Requirements.
For the FVP and Juno platforms, the FWU process relies on a watchdog
reset. In order to automate the test of FWU, the length of this process
needs to be as short as possible. Instead of waiting for those 4 minutes
to have a reset by the watchdog, tell it to reset immediately.
There are no side effects as the value of the watchdog's load register
resets to 0xFFFFFFFF.
Tested on Juno.
Change-Id: Ib1aea80ceddc18ff1e0813a5b98dd141ba8a3ff2
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
diff --git a/plat/arm/board/juno/juno_bl1_setup.c b/plat/arm/board/juno/juno_bl1_setup.c
index 7a3d22d..89398d6 100644
--- a/plat/arm/board/juno/juno_bl1_setup.c
+++ b/plat/arm/board/juno/juno_bl1_setup.c
@@ -98,6 +98,9 @@
/* Clear the NV flags register. */
*nv_flags_clr = *nv_flags_ptr;
+ /* Setup the watchdog to reset the system as soon as possible */
+ sp805_refresh(ARM_SP805_TWDG_BASE, 1U);
+
while (1)
wfi();
}