feat(stpmic1): add USB OTG regulators
Add regulators boost, pwr_sw1 and pwr_sw2 regulators related to
USB OTG supply BOOST, SW_OTG and SWIN/SWOUT. These regulators are
needed since manipulated during the suspend/resume power sequence
as per FDT description for stm32mp15x-xxx boards from
STMicroelectronics.
Change-Id: I6217de707e49882bd5a9100db43e0d354908800d
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
diff --git a/drivers/st/pmic/stpmic1.c b/drivers/st/pmic/stpmic1.c
index 8199b7a..714d532 100644
--- a/drivers/st/pmic/stpmic1.c
+++ b/drivers/st/pmic/stpmic1.c
@@ -421,6 +421,10 @@
3300,
};
+static const uint16_t fixed_5v_voltage_table[] = {
+ 5000,
+};
+
/* Table of Regulators in PMIC SoC */
static const struct regul_struct regulators_table[] = {
{
@@ -541,6 +545,27 @@
.mask_reset_reg = MASK_RESET_LDO_REG,
.mask_reset = VREF_DDR_MASK_RESET,
},
+ {
+ .dt_node_name = "boost",
+ .voltage_table = fixed_5v_voltage_table,
+ .voltage_table_size = ARRAY_SIZE(fixed_5v_voltage_table),
+ .control_reg = USB_CONTROL_REG,
+ .enable_mask = BOOST_ENABLED,
+ },
+ {
+ .dt_node_name = "pwr_sw1",
+ .voltage_table = fixed_5v_voltage_table,
+ .voltage_table_size = ARRAY_SIZE(fixed_5v_voltage_table),
+ .control_reg = USB_CONTROL_REG,
+ .enable_mask = USBSW_OTG_SWITCH_ENABLED,
+ },
+ {
+ .dt_node_name = "pwr_sw2",
+ .voltage_table = fixed_5v_voltage_table,
+ .voltage_table_size = ARRAY_SIZE(fixed_5v_voltage_table),
+ .control_reg = USB_CONTROL_REG,
+ .enable_mask = SWIN_SWOUT_ENABLED,
+ },
};
#define MAX_REGUL ARRAY_SIZE(regulators_table)
diff --git a/include/drivers/st/stpmic1.h b/include/drivers/st/stpmic1.h
index eb104e4..a69e5b5 100644
--- a/include/drivers/st/stpmic1.h
+++ b/include/drivers/st/stpmic1.h
@@ -148,6 +148,7 @@
#define OCP_LIMIT_HIGH BIT(3)
#define SWIN_SWOUT_ENABLED BIT(2)
#define USBSW_OTG_SWITCH_ENABLED BIT(1)
+#define BOOST_ENABLED BIT(0)
int stpmic1_powerctrl_on(void);
int stpmic1_switch_off(void);